Estimation of the Stress-Strength Reliability for Exponentiated Pareto Distribution Using Median and Ranked Set Sampling Methods

In reliability analysis, the stress-strength model is often used to describe the life of a component which has a random strength (X) and is subjected to a random stress (Y). In this paper, we considered the problem of estimating the reliability R=P [Y<X] when the distributions of both stress and strength are independent and follow exponentiated Pareto distribution. The maximum likelihood estimator of the stress strength reliability is calculated under simple random sample, ranked set sampling and median ranked set sampling methods. Four different reliability estimators under median ranked set sampling are derived. Two estimators are obtained when both strength and stress have an odd or an even set size. The two other estimators are obtained when the strength has an odd size and the stress has an even set size and vice versa. The performances of the suggested estimators are compared with their competitors under simple random sample via a simulation study. The simulation study revealed that the stress strength reliability estimates based on ranked set sampling and median ranked set sampling are more efficient than their competitors via simple random sample. In general, the stress strength reliability estimates based on median ranked set sampling are smaller than the corresponding estimates under ranked set sampling and simple random sample methods.     

Generalized Marshall Olkin Inverse Lindley Distribution with Applications

In this article, a new generalization of the inverse Lindley distribution is introduced based on Marshall-Olkin family of distributions. We call the new distribution, the generalized Marshall-Olkin inverse Lindley distribution which offers more flexibility for modeling lifetime data. The new distribution includes the inverse Lindley and the Marshall-Olkin inverse Lindley as special distributions. Essential properties of the generalized Marshall-Olkin inverse Lindley distribution are discussed and investigated including, quantile function, ordinary moments, incomplete moments, moments of residual and stochastic ordering. Maximum likelihood method of estimation is considered under complete, Type-I censoring and Type-II censoring. Maximum likelihood estimators as well as approximate confidence intervals of the population parameters are discussed. A comprehensive simulation study is done to assess the performance of estimates based on their biases and mean square errors. The notability of the generalized Marshall-Olkin inverse Lindley model is clarified by means of two real data sets. The results showed the fact that the generalized Marshall-Olkin inverse Lindley model can produce better fits than power Lindley, extended Lindley, alpha power transmuted Lindley, alpha power extended exponential and Lindley distributions.     

Enhancing the stability and crystallinity of CsPbIBr2 through antisolvent engineering

All inorganic lead-based perovskites containing bromine-iodine alloys, such as CsPbIBr_2, have arisen as one of the most attractive candidates for absorber layers in solar cells. That said, there remains a large gap when it comes to film and crystal quality between the inorganic and hybrid perovskites. In this work, antisolvent engineering is employed as a simple and reproducible method for improving CsPbIBr₂ thin films. We found that both the antisolvent used and the conditions under which it was applied have a measurable impact on both the quality and stability of the final product. We arrived at this conclusion by characterising the samples using scanning electron microscopy, X-ray diffraction, UV–visible and photoluminescence measurements, as well as employing a novel system to quantify stability. Our findings, and the application of our novel method for quantifying stability, demonstrate the ability to significantly enhance CsPbIBr₂ samples, produced via a static one-step spin coating method, by applying isopropanol 10 s after commencing the spin programme. The antisolvent quenched CsPbIBr₂ films demonstrate both improved crystallinity and an extended lifespan.

     

Accountable privacy preserving attribute-based access control for cloud services enforced using blockchain

International Journal of Information Security - When dealing with cloud services, there are important security requirements that are highly recommended to be achieved, notably, access control....     

Clams as pollution bioindicators in Kuwait''s marine environment: metal accumulation and depuration

This study has developed and verified clam transplantation for marine pollution monitoring in Kuwait and has assessed its reliability for monitoring pollution by heavy metals through laboratory and field transplantation experiments. In field experiments, live specimens of the clam Circenita callipyga were transplanted, either suspended in seawater or buried in sand, to 11 coastal sites in Kuwait; subsamples of transplanted clams were recovered at intervals over a 6-month period. In laboratory experiments, heavy metal accumulation for 36 days and depuration (body's release of pollutants) for 60 days in small and big clams were investigated. Clams subsampled in laboratory and field experiments were analyzed for Hg, Cu, V, Cd and Pb. Results showed the ability of clams to survive under the transplantation conditions. Accumulation of biofouling materials was a problem at only two transplantation sites and was overcome by periodic cleaning. Statistical analysis of laboratory experimental data showed significant accumulation of all test metals and significant depuration of Hg, Cu, V and Cd. Rates of metal accumulation and depuration differed in relation to clam size class. Field experiments indicated statistically significant increases in Hg and Cu concentrations in the transplanted clams at most stations, no change in Cd concentrations and an increase or, occasionally, a decrease in V and Pb concentrations.     

Occurrence and seasonal variations of Giardia in wastewater and river water from Al-Jinderiyah region in Latakia,Syria

ABSTRACT

This study investigates the occurrence and concentration of Giardia cysts in wastewater and river water samples in Al-Jinderiyah region, Latakia, Syria. A total of 120 samples were collected between October 2016 and October 2017 from influent and effluent of Al-Jinderiyah Waste Water Treatment Plant (WWTP) and from three contaminated river water sites. Samples were concentrated and subjected to microscopic examination. The results show that the concentrations of cysts ranged from 0 to 297 cysts/L in wastewater samples. The overall removal efficiency of cysts in the activated sludge WWTP was 84.35%. The concentrations of cysts ranged from 0 to 128.52 cysts/L in river water samples. The highest concentration in river water was recorded near the raw wastewater discharge point. Seasonal variations of Giardia cysts concentration were significant, and the highest concentrations were recorded in the rainy season. The results suggest that Giardia may pose a public health risk in the studied region.     

Separation of a compound effective against Biomphalaria alexandrina snails from the filtrate of Penicillium janthinellum

Biomphalaria alexandrina snails, as intermediate hosts of schistosomiasis, play a central role in dissemination of the disease. Control of these snails by chemical molluscicides adversely affects the aquatic environment, causing toxic and carcinogenic effects on non-target organisms. Searching for promising substances from biological origin becomes an urgent need to overcome these drawbacks. Screening tests were carried out on 236 fungal genera isolated from the habitat of freshwater snails in four Egyptian governorates. Twenty species were effective against B. alexandrina snails, but the most potent was Penicillium janthinellum as the value of LC₅₀ was 1.03%. Chemical analyses of this filtrate resulted in the separation of a compound effective against snails; it was identified as methyl gallate. Protein electrophoresis showed that both fungal filtrate and methyl gallate affect the protein pattern of snails’ haemolymph. Little or no mortality of Daphnia pulex individuals was observed after their exposure to sub lethal concentrations of each treatment.     

Caractérisation minéralogique et géotechnique des argiles marneuses gonflantes de la région de Médéa,Algérie

This paper presents the approach followed for the geological, mineralogical, and geotechnical characterization of swelling marly clays in the Médéa region. This investigation is conducted in order to estimate the swelling potential of this marly clay layer. The studied sites, located at about 80 km south of Algiers, Algeria, cover an area of approximatively 400 hectares. Five sites are considered. In the first step, the geological, tectonic, climatic, and hydrological contexts of the region are described. According to the geological map of Médéa, most of the formations encountered in the area are composed of Miocene layers represented by marly clays (Fig. 2). This region is characterized by its high and low temperature in summer and winter, respectively, and variable humidity (Fig. 3). In a second step, the results of geotechnical studies, X-ray diffraction tests, chemical analyses, and scanning electron microscope (SEM) observations are presented (Figs. 3, 4, 5, 6, 7, 8, 9). The soils contain quartz (20–26 %), calcium carbonates (11–55 %), kaolinite (8–13 %), illite (6–14 %) and Montmorillonite (18–26 %). The study of their microstructure by means of SEM indicates that these soils are formed by a compact marly clay matrix that is relatively homogeneous and oriented in the dip direction of bedding. A grain size analysis shows that the clay content varies between 17 and 70 %. The water content of all samples varies between 8 and 30 %. The values of the liquidity limit (LL) and plasticity index (PI) vary between 28–76 % and 16–36 % respectively, indicating a highly plastic soil; this is also confirmed by a specific surface varying between 99 and 179 m²/g. The dry density γ _d varies between 15 and 19 kN/m³. The swelling potential of the marly clay samples is evaluated firstly using various indirect methods. In literature, a number of empirical classifications are proposed by different authors (BRE 1980; Chen 1988; Komornik and David 1969; Seed et al. 1962; Snethen 1984; Vijayvergiya et Ghazzaly 1973 et Williams and Donaldson 1980). The swelling potential is related to certain physical properties of soils, such as consistency limits, clay content, methylene blue value, etc. In general, these methods indicate that all the tested soils have a high swelling potential, which confirms the results of mineralogical analysis. Secondly, direct measurements of swelling parameters are performed. Swelling tests are carried out using a standard slaved one-dimensional odometer using two methods: free swell and constant volume, according to standard ASTM D 4546-90 and AFNOR (1995). The swell pressure, the swell percentage and the swell index are given in Fig. 16. It is noted that the soils develop very significant swell pressures which vary between 25 and 900 kPa. This is in agreement with the results obtained by empirical methods. This investigation clearly shows that the marly clays of the Médéa region have a high swelling potential. Therefore, taking into account the phenomenon of soil swelling in structure design is essential.