Optimized structure and electrochemical properties of sulfonated carbon nanotubes/Co–Ni bimetallic layered hydroxide composites for high-performance supercapacitors

Technical development in electronic devices is frequently stifled by their insufficient capacity and cyclic stability of energy-storage devices. The nano-structured materials have sensational importance for providing novel and optimized combination to overcome exiting boundaries and provide efficient energy storage systems. Metal hydroxide materials with high capacity for pseudo-capacitance properties have grabbed special attention. Lately, the blend of nickel and cobalt hydroxides has been considered as a favorable class of metallic hydroxide materials owing to their comparatively high capacitance and exceptional redox reversibility. The sulfonated carbon nanotube fluid (SCNTF) was prepared by the ion exchange method to be utilized as the exceptional templates due to astonishing specific surface area, ensuring the maximum utilization of the active material. The CoNi-layered double hydroxides (LDHs)/SCNTF core-shell nanocomposite was prepared by the simple solvothermal method. Structural analysis showed that the composite material had the high conductance of carbon materials, the pseudo-capacitance characteristics of metal hydroxides, and porous structure, which facilitates the ion shuttle when the electrolyte reacts with the active material. Electrochemical analysis results showed that CoNi-LDHs/SCNTF had excellent rate performance, reversible charge-discharge properties and cycle stability. It exhibited an extreme specific capacity of 1190.5 F g^?1 at a current density of 1 A g^?1; whereas specific capacity remained 953.7 F g^?1 at the current density was 10 A g^?1. In addition, the capacity retention rate after 5000 charge-discharge cycles at a current density of 20 A g^?1 was 81.0%. The results indicated that the CoNi-LDHs/SCNTF core-shell nanocomposite material is cost efficient and an effective substitute in energy storage applications.     

Extracellular Vesicles and Asthma—More Than Just a Co-Existence

Extracellular vesicles (EVs) are membranous structures, which are secreted by almost every cell type analyzed so far. In addition to their importance for cell-cell communication under physiological conditions, EVs are also released during pathogenesis and mechanistically contribute to this process. Here we summarize their functional relevance in asthma, one of the most common chronic non-communicable diseases. Asthma is a complex persistent inflammatory disorder of the airways characterized by reversible airflow obstruction and, from a long-term perspective, airway remodeling. Overall, mechanistic studies summarized here indicate the importance of different subtypes of EVs and their variable cargoes in the functioning of the pathways underlying asthma, and show some interesting potential for the development of future therapeutic interventions. Association studies in turn demonstrate a good diagnostic potential of EVs in asthma.     

Classification of DoS Attacks in Smart Underwater Wireless Sensor Network

As per the most recent literature, Orthogonal Frequency Division Multiplexing (OFDM), a multi access technique, is considered most suitable for the 3G, 4G and 5G techniques in high speed wireless communication. What made OFDM most popular is its ability to deliver high bandwidth efficiency and superior data rate. Besides it, high value of peak to average power ratio (PAPR) and Inter Carrier Interference (ICI) are the challenges to tackle down via appropriate mitigation scheme. As a research contribution in the present work, an improved self-cancellation (SC) technique is designed and simulated through Simulink to mitigate the effect of ICI. This novel proposed technique (Improved SC) is designed over discrete wavelet transform (DWT) based OFDM and compared with conventional SC scheme over different channel conditions i.e. AWGN and Rayleigh fading environments. It is found that proposed DWT-OFDM with Improved SC scheme outperforms conventional SC technique significantly, under both AWGN and Rayleigh channel conditions. Further, in order to justify the novelty in the research contribution, a Split-DWT based Simulink model for Improved SC scheme is investigated to analyse the BER performance. This Split-DWT based Simulink model presented here foretells the future research potential in wavelet hybridization of OFDM to side-line ICI effects more efficiently.

     

Ternary adsorbent photocatalyst hybrid (APH) nanomaterials for improved abstraction of tetracycline from water

ABSTRACT

Current health situations have instigated increased frequency of taking antibiotics for cure of infections but this amplified use is posing threats to environment. This research is focused to remove Tetracycline (TC), an antibiotic from water, using an advanced nanohybrid that compact the properties of adsorbent and photocatalyst. Compared to conventional methods for remediation of TC, large surface area (452 m²g^?1) adsorbent photocatalyst hybrid (APH) g-C₃N₄/α-MoO₃/ZIF-67 (CMZ) have found much effective as 97% degradation of TC is observed in 110 min with 0.1 g of APH. Increasing g-C₃N₄ in the hybrids has improved percent degradation of TC molecules. CMZ-3 is found as a potential candidate for water treatment.     

Halogenation effect promoted low bandgap polymers based on asymmetric isoindigo unit with low energy loss

To optimize the energy levels of the structural framework of isoindigo polymers, a series of asymmetric isoindigo based low bandgap polymers with chlorine, fluorine and thiazole substituents was constructed and their optical, electrochemical and photovoltaic properties were comparatively evaluated for the impact of different substitutions. In comparison with the polymer based on 2,2'‐bithiophene and isoindigo unit (PTi) with non‐substituted bithiophene as the donor moiety, the highest occupied molecular orbital energy level for the newly synthesized polymers is significantly decreased, and in turn an improvement of the open‐circuit voltage (V_OC) is noted in the corresponding photovoltaic devices. More importantly, combined with a low bandgap of 1.32 eV, the energy losses (E_loss) could be reduced to 0.61 eV for polymer based on chlorinated 2,2'‐bithiophene and isoindigo unit (PCl). In addition, the halogen moieties are observed to be superior in device fabrication and give better values than the thiazole substituent. Both fluorinated and chlorinated polymer donors exhibited improved performance compared with the original polymer PTi. Consequently, this work not only presents the influence of different electron withdrawing substituents on the physicochemical and photovoltaic performance, but also backs the concept of how to reduce the energy loss via the heteroatom effect. © 2020 Society of Chemical Industry     

Evaluation of alumina reinforced oil fly ash composites prepared by spark plasma sintering

The thermomechanical behavior of micro/nano-alumina (Al₂O₃) ceramics reinforced with 1-5 wt.% of acid-treated oil fly ash (OFA) was investigated. Composites were sintered using spark plasma sintering (SPS) technique at a temperature of 1400°C by applying a constant uniaxial pressure of 50 MPa. It was evaluated that the fracture toughness of micro- and nanosized composites improved in contrast with the monolithic alumina. Highest fracture toughness value of 4.85 MPam^1/2 was measured for the nanosized composite reinforced with 5 wt.% OFA. The thermal conductivity of the composites (nano-/microsized) decreased with the increase in temperature. However, the addition of OFA (1-5 wt.%) in nanosized alumina enhanced the thermal conductivity at an evaluated temperature. Furthermore, a minimum thermal expansion value of 6.17 ppm*K⁻¹ was measured for nanosized Al₂O₃/5 wt.% OFA composite. Microstructural characterization of Al₂O₃-OFA composites was done by x-ray diffraction and Raman spectroscopy. Oil fly ash particles were seen to be well dispersed within the alumina matrix. Moreover, the comparative analysis of the nano-/microsized Al₂O₃/OFA composites shows that the mechanical and thermal properties were improved in nanosized alumina composites.     

Switchable Fluorescence of Doxorubicin for Label-Free Imaging of Bioorthogonal Drug Release

Monitoring the release and activation of prodrug formulations provides essential information about the outcome of a therapy. While the prodrug delivery can be confirmed by using different imaging techniques, confirming the release of active payload by using imaging is a challenge. Here, we have discovered that the switchable fluorescence of doxorubicin can validate drug release upon its uncaging reaction with a highly specific chemical partner. We have observed that the conjugation of doxorubicin with a trans-cyclooctene (TCO) diminishes its fluorescence at 595 nm. This quenched fluorescence of the doxorubicin prodrug is recovered upon its bond-cleaving reaction with tetrazine. Clinically assessed iron oxide nanoparticles were used to formulate a doxorubicin nanodrug. The release of doxorubicin from the nanodrug was studied under various experimental conditions. A fivefold increase in doxorubicin fluorescence is observed after complete release. The studies were carried out in vitro in MDA-MB-231 breast cancer cells. An increase in Dox signal was observed upon tetrazine administration. This switchable fluorescence mechanism of Dox could be employed for fundamental studies, that is, the reactivity of various tetrazine and TCO linker types under different experimental conditions. In addition, the system could be instrumental for translational research where the release and activation of doxorubicin prodrug payloads can be monitored by using optical imaging systems.     

Isolation and identification of caffeine-degrading bacteria from coffee plantation area

Decaffeination of food and beverage products is in high demand. In this study, a caffeine-degrading bacterium Burkholderia spp. was isolated from coffee plantation area of Chiang Mai province of Thailand. The bacterial isolates were first identified by morphological, physiological, and biochemical tests followed by 16S rDNA analysis. The bacterial isolate of Burkholderia spp. showed 45.5% of caffeine degradation in caffeine containing media (2.5 g/L) after 110 h of incubation period. Burkholderia spp. showed only 2.6% caffeine degradation when exposed to high concentrations of caffeine containing medium (20 g/L). The growth rate of Burkholderia spp. declined with the increase in the caffeine concentration, which indicated the inhibiting effect of caffeine at very high concentrations. The maximum growth rate of 0.053 h^?1 was observed at 2.5 g/L of caffeine. Overall due to high caffeine tolerance and biodegradation of caffeine, Burkholderia spp. can be effectively used to degrade caffeine from agro-industrial wastes targeted for value added food applications and environmental remediation.