Phase behavior,density, and crystallization of polyethylene in n‐pentane and in n‐pentane/CO2 at high pressures

The phase behavior and volumetric properties of polyethylene (PE) in solutions of n‐pentane and n‐pentane/CO₂ were studied in a temperature (T) range of 370–440 K at pressures up to 60 MPa. Measurements were conducted with a variable‐volume view‐cell system equipped with optical sensors to monitor the changes in the transmitted light intensity as the P or the T of the system was changed. Lower‐critical‐solution‐temperature‐type behavior was observed for all of the liquid–liquid (L–L) phase boundaries, which shifted to higher pressures in solutions containing CO₂. The solid–fluid (S–F) phase boundaries were investigated over a P range of 8–54 MPa and took place in a narrow T range, from 374 to 378 K in this P interval. The S–F phase boundary showed a unique feature in that the demixing temperatures showed both increasing and decreasing trends with P depending on the P range. This was observed in both the PE/n‐pentane and PE/n‐pentane/CO₂ mixtures. The density of these solutions were measured as a function of P at selected temperatures or as a function of T at selected pressures that corresponded to the paths followed in approaching the phase boundaries (S–F or L–L) starting from a homogeneous one‐phase condition. The data showed a smooth variation of the overall mixture density along these paths. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2201–2209, 2003     

An interdisciplinary heuristic evaluation method for universal building design

This study highlights how heuristic evaluation as a usability evaluation method can feed into current building design practice to conform to universal design principles. It provides a definition of universal usability that is applicable to an architectural design context. It takes the seven universal design principles as a set of heuristics and applies an iterative sequence of heuristic evaluation in a shopping mall, aiming to achieve a cost-effective evaluation process. The evaluation was composed of three consecutive sessions. First, five evaluators from different professions were interviewed regarding the construction drawings in terms of universal design principles. Then, each evaluator was asked to perform the predefined task scenarios. In subsequent interviews, the evaluators were asked to re-analyze the construction drawings. The results showed that heuristic evaluation could successfully integrate universal usability into current building design practice in two ways: (i) it promoted an iterative evaluation process combined with multi-sessions rather than relying on one evaluator and on one evaluation session to find the maximum number of usability problems, and (ii) it highlighted the necessity of an interdisciplinary ad hoc committee regarding the heuristic abilities of each profession. A multi-session and interdisciplinary heuristic evaluation method can save both the project budget and the required time, while ensuring a reduced error rate for the universal usage of the built environments.     

Prioritization methodology of dangerous substances for water quality monitoring with scarce data

Monitoring and control of dangerous substances discharged into receiving waters have attracted more attention lately. Since it is not possible to analyze every single substance, a prioritization methodology is needed for the selection of those to be monitored. Existing well-developed models require significant amount of data for reliable outcomes. This paper presents a methodology to prioritize the dangerous substances having adverse effects on freshwaters in Turkey, where data are scarce. Such a methodology will also serve as a solid model for other countries with limited background data. The adopted methodology enabled the elimination of chemicals to generate a candidate list composed of 608 substances among more than 5000 substances. Further screening and prioritization were conducted using different assessment methods (i.e., Total Hazard Value, Total Impact Value, Combined Monitoring-based, and Modelling-based Priority Setting) to obtain a proposed Final Candidate Specific Pollutants List of 150 dangerous substances. The proposed Candidate National Pollutant List of Turkey was established by combining 45 priority pollutants of the European Union with a list of candidate specific pollutants. According to the outcomes of this study, monitoring and controlling of 195 dangerous substances in freshwaters are recommended. Further detailed studies should be conducted in order to observe the actual levels of these dangerous substances in freshwaters followed by a review of the monitoring list accordingly. Moreover, further revisions might be required in the proposed list due to some possible versatile conditions in terms of sampling points (i.e., change in the location of industries).     

Gold recovery from dilute gold solutions using DEAE-cellulose

The present work investigates gold recovery using DEAE-cellulose, a common biopolymer derivative, from synthetically prepared diluted gold-bearing solutions of 50 ppm. The effects of different recovery parameters on gold recovery efficiency were studied in detail. It was demonstrated that gold recovery efficiency increased with an increasing amount of sorbent, as well as increasing contact time. A gold recovery efficiency of 99% was attained under conditions of 20–40 g DEAE-cellulose per liter at a shaking rate of 130 rpm for 30 min at room temperature. On the other hand, with smaller amounts of sorbent (6 g/l), it was also possible to recover gold from the solution with 99% efficiency when the reaction temperature was increased to 60 °C. The shaking rate and temperature were demonstrated to play a vital role in the recovery process. It was also found that gold recovery by DEAE-cellulose is an intermediate-controlled process with an activation energy of 37.11 kJ/mol. The XRD pattern and SEM images revealed that the recovered gold was in the metallic form.     

Capacity factor prediction and planning in the wind power generation industry

The common practice to calculate wind generation capacity values relies more on heuristic approximations than true system estimations. In this paper we proposed a more accurate method. In the first part of our analysis, a Monte Carlo simulation was created based on Markov chains to provide an independent estimate of the true behavior of wind farm capacity value as a function of system penetration. With this curve as a baseline, a technique for using beta distributions to model the input variables was adopted. A final step to increase accuracy involved the use of numerical convolution within the program to eliminate summation estimates.     

A decision support framework for metrics selection in goal-based measurement programs: GQM-DSFMS

Software organizations face challenges in managing and sustaining their measurement programs over time. The complexity of measurement programs increase with exploding number of goals and metrics to collect. At the same time, organizations usually have limited budget and resources for metrics collection. It has been recognized for quite a while that there is the need for prioritizing goals, which then ought to drive the selection of metrics. On the other hand, the dynamic nature of the organizations requires measurement programs to adapt to the changes in the stakeholders, their goals, information needs and priorities. Therefore, it is crucial for organizations to use structured approaches that provide transparency, traceability and guidance in choosing an optimum set of metrics that would address the highest priority information needs considering limited resources. This paper proposes a decision support framework for metrics selection (DSFMS) which is built upon the widely used Goal Question Metric (GQM) approach. The core of the framework includes an iterative goal-based metrics selection process incorporating decision making mechanisms in metrics selection, a pre-defined Attributes/Metrics Repository, and a Traceability Model among GQM elements. We also discuss alternative prioritization and optimization techniques for organizations to tailor the framework according to their needs. The evaluation of the GQM-DSFMS framework was done through a case study in a CMMI Level 3 software company.     

Antibacterial oil‐based polyurethane films for wound dressing applications

As an alternative to petroleum‐based polyol, hydroxyl containing material was prepared from linseed oil for polyurethane synthesis. Hexamethylene di‐isocyanate (HMDI) and/or 4, 4′‐methylene diphenyl di‐isocyanate (MDI) were used as isocyanate source. The polymerization reaction was carried out without catalyst. Polymer films were prepared by casting‐evaporation technique. The MDI/HMDI‐based polyurethane and its films had higher T_g and better thermal property than that of the HMDI‐based one because of the existence of benzene ring in the polymer chain. Static water contact angle was determined to be 74° and 77.5° for HMDI and MDI/HMDI‐based films, respectively. Water adsorption was found to be around 2.6–3.6% for both films. In vitro degradation of polyurethanes in phosphate buffered saline at 37°C was investigated by gravimetric method. Fourier transform infrared spectroscopy and scanning electron microscopy were used for confirmation of degradation on the polymer surface. The degradation rate of the HMDI‐based polyurethane film was found higher than that of the MDI/HMDI‐based film. Both the direct contact method and the MMT test were applied for determination of cytotoxicity of polymer films, and the polyurethane films investigated here was not cytotoxic. Silver‐containing films were prepared using Biocera A® as filler and were screened for their antibacterial performance against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and/or Bacillus subtilis. The films prepared with and without Biocera A® exhibited antibacterial activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Adaptive educational hypermedia accommodating learning styles: A content analysis of publications from 2000 to 2011

Implementing instructional interventions to accommodate learner differences has received considerable attention. Among these individual difference variables, the empirical evidence regarding the pedagogical value of learning styles has been questioned, but the research on the issue continues. Recent developments in Web-based implementations have led scholars to reconsider the learning style research in adaptive systems. The current study involved a content analysis of recent studies on adaptive educational hypermedia (AEH) which addressed learning styles. After an extensive search on electronic databases, seventy studies were selected and exposed to a document analysis. Study features were classified under several themes such as the research purposes, methodology, features of adaptive interventions and student modeling, and findings. The analysis revealed that the majority of studies proposed a framework or model for adaptivity whereas few studies addressed the effectiveness of learning style-based AEH. Scales were used for learning style identification more than automatic student modeling. One third of the studies provided a framework without empirical evaluation with students. Findings on concrete learning outcomes were not strong enough; however, several studies revealed that suggested models influenced student satisfaction and success. Current trends, potential research gaps and implications were discussed.     

Resonant frequency of an air gap tuned circular disc microstrip antenna

In this study, the formulation and the computation of the resonant frequency of an air gap tuned circular disc microstrip antenna are simplified, with improved accuracy, by using a new and very simple effective permittivity expression which is valid for thin and thick gaps. Very good agreement between the theoretical and the experimental resonant frequency values is obtained for the various structural parameters and operational modes.