Experimental Study of Alumina Particle Removal From a Plane surface

Micron and submicron alumina particles are often used for the mechanical polishing of the GaAs wafers processed in the microelectronic industry. A better understanding of the adhesion mechanisms is the key factor for the particle removal and for the optimisation of the industrial chemical cleaning. However, the nature and the strength of the complex interactions occurring between asymmetrical alumina particles and the surface remain unclear. Thus, an experimental study of the detachment of asymmetrical alumina particles in adhesive contact with a glass plate was done using a specially designed shear stress flow chamber. A series of experiments was performed to measure the shear stress necessary to remove individual alumina particles (of 3 and 0.3 µm nominal size) under various chemical solutions (diluted ammonia, surfactant and glycerol). Then the effects of the particle size, the resting time, the pH and the nature of the chemical solutions used for the removal of the alumina particles was characterised in terms of percentage of alumina particles detached. Results have shown that the longer the resting time, the more adherent the particles are. Moreover, it was found that the ammonia solution gives the best particle removal rate (80%) because of the strong repulsive electrostatic interactions between the alumina particles and the glass surface, both being charged negatively in a basic solution.     

Perceptual evaluation of color gamut mapping algorithms

The recommendation of the CIE has been followed as closely as possible to evaluate the accuracy of five color gamut mapping algorithms (GMAs)—two nonspatial and three spatial algorithms—by psychophysical experiments with 20 test images, 20 observers, one test done on paper and a second one on display. Even though the results do not show any overall “winner,” one GMA is definitely perceived as not accurate. The importance of a high number of test images to obtain robust evaluation is underlined by the high variability of the results depending on the test images. Significant correlations between the percentage of out‐of‐gamut pixels, the number of distinguishable pairs of GMAs, and the perceived difficulty to distinguish them have been found. The type of observers is also important. The experts, who prefer a spatial GMA, show a stronger consensus and look especially for a good rendering of details, whereas the nonexperts hardly make a difference between the GMAs. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 470–476, 2008     

Outdoor attractancy of males ofMatsucoccus josephi (Homoptera: Matsucoccidae) andElatophilus hebraicus (Hemiptera: Anthocoridae) to synthetic female sex pheromone ofMatsucoccus josephi

The active component of the sex pheromone ofMatsucoccus josephi is (2E,6E,8E)-5,7-dimethyl-2,6,8-decatrien-4-one; the chemical is also a powerful kairomone of adult males and females of the bugElatophilus hebraicus the principal predator ofM. josephi. The presence of theZ isomer (2E,6Z,8E)-5,7-dimethyl-2,6,8-decatrien-4-one does not interfere with the attractancy of the activeE component forM. josephi males or the bug. Our results show a clear dose-response between trap catch ofM. josephi males andE. hebraicus. Conversely, increasing amounts of theZ isomer in the mixture did not affect the attraction of the scale insect males or the bug. The catch ofM. josephi males did not differ significantly among traps of different color, and was significantly higher with traps attached to the tree trunk than those suspended between trees. Comparison of the catch ofM. josephi among the three forests and between pine species suggests that the level of infestation ofPinus halepepsis andPinus brutia ssp.brutia is similar, despite the fact that the latter pine is resistant to the scale insect. Both sexes ofE. hebraicus were trapped in much lower numbers at the more infested sites. This may be related to interference with the activity ofE. hebraicus due to deterioration and drying of parts of the tree crowns and heavy colonization by generalist predators in injured trees.     

Plasma modification of cellulose derivatives as biomaterials

A film of cellulose acetate was submitted to a cold plasma of tetrafluoromethane or of sulfur hexafluoride. The interactions of these cold plasmas and cellulose acetate lead to a material whose surface has been modified by fluorination. Comparison of CF₄ or SF₆ plasma treatment shows that fluorine atoms provided by each kind of plasma induce degradation and grafting of fluorocarbon radicals on the surface. As a consequence, the surface energy decreases and offers the possibility of a better response of plasma-modified cellulose derivatives used as biomaterials (e.g. hemodialysis membrane).     

Protecting biodegradable coatings releasing antimicrobial agents

This article describes the synthesis and in vitro analysis of poly(ester anhydride) antimicrobial protection coatings. Poly(ester anhydride)s composed of ricinoleic acid, sebacic acid, terephthalic acid, and isophthalic acid were used in this study. The polymers were compatible with various fillers commonly used in paint preparation. The in vitro experiments showed that the polymers are able to release diuron, an antimicrobial agent, for months. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

CADNA: a library for estimating round-off error propagation

The CADNA library enables one to estimate round-off error propagation using a probabilistic approach. With CADNA the numerical quality of any simulation program can be controlled. Furthermore by detecting all the instabilities which may occur at run time, a numerical debugging of the user code can be performed. CADNA provides new numerical types on which round-off errors can be estimated. Slight modifications are required to control a code with CADNA, mainly changes in variable declarations, input and output. This paper describes the features of the CADNA library and shows how to interpret the information it provides concerning round-off error propagation in a code.

Program summary

Program title:CADNACatalogue identifier:AEAT_v1_0Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEAT_v1_0.htmlProgram obtainable from:CPC Program Library, Queen's University, Belfast, N. IrelandLicensing provisions:Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.htmlNo. of lines in distributed program, including test data, etc.:53 420No. of bytes in distributed program, including test data, etc.:566 495Distribution format:tar.gzProgramming language:FortranComputer:PC running LINUX with an i686 or an ia64 processor, UNIX workstations including SUN, IBMOperating system:LINUX, UNIXClassification:4.14, 6.5, 20Nature of problem:A simulation program which uses floating-point arithmetic generates round-off errors, due to the rounding performed at each assignment and at each arithmetic operation. Round-off error propagation may invalidate the result of a program. The CADNA library enables one to estimate round-off error propagation in any simulation program and to detect all numerical instabilities that may occur at run time.Solution method:The CADNA library [1] implements Discrete Stochastic Arithmetic [2-4] which is based on a probabilistic model of round-off errors. The program is run several times with a random rounding mode generating different results each time. From this set of results, CADNA estimates the number of exact significant digits in the result that would have been computed with standard floating-point arithmetic.Restrictions:CADNA requires a Fortran 90 (or newer) compiler. In the program to be linked with the CADNA library, round-off errors on complex variables cannot be estimated. Furthermore array functions such as product or sum must not be used. Only the arithmetic operators and the abs, min, max and sqrt functions can be used for arrays.Running time:The version of a code which uses CADNA runs at least three times slower than its floating-point version. This cost depends on the computer architecture and can be higher if the detection of numerical instabilities is enabled. In this case, the cost may be related to the number of instabilities detected.References:

[1]

The CADNA library, URL address: http://www.lip6.fr/cadna.

[2]

J.-M. Chesneaux, L'arithmétique Stochastique et le Logiciel CADNA, Habilitation á diriger des recherches, Université Pierre et Marie Curie, Paris, 1995.

[3]

J. Vignes, A stochastic arithmetic for reliable scientific computation, Math. Comput. Simulation 35 (1993) 233-261.

[4]

J. Vignes, Discrete stochastic arithmetic for validating results of numerical software, Numer. Algorithms 37 (2004) 377-390.

     

Solving large sparse linear systems in a grid environment: the GREMLINS code versus the PETSc library

Solving large sparse linear systems is essential in numerous scientific domains. Several algorithms, based on direct or iterative methods, have been developed for parallel architectures. On distributed grids consisting of processors located in distant geographical sites, their performance may be unsatisfactory because they suffer from too many synchronizations and communications. The GREMLINS code has been developed for solving large sparse linear systems on distributed grids. It implements the multisplitting method that consists in splitting the original linear system into several subsystems that can be solved independently. In this paper, the performance of the GREMLINS code obtained with several libraries for solving the linear subsystems is analyzed. Its performance is also compared with that of the widely used PETSc library that enables one to develop portable parallel applications. Numerical experiments have been carried out both on local clusters and on distributed grids.     

Resistance to High-Temperature Oxidation and Wear of Various Ferrous Alloys Used in Rolling Mills

Various materials are commonly used to manufacture work rolls for hot rolling mills, such as ICDP (Indefinite Chill Double Pour) cast irons, high-chromium white cast irons, and high speed steels (HSS). Various chemical compositions and microstructures are studied in order to optimize the in-use behavior of those grades of rolls. In this paper, six grades of ferrous alloys (an ICDP cast iron; an ICDP cast iron enriched in vanadium, niobium, and molybdenum; a HSS; a graphitic HSS; a high-chromium white cast iron (Hi-Cr); and a niobium-molybdenum-doped high-chromium white cast iron) were investigated. High-temperature oxidation tests with gravimetric means at 575 °C in water vapor atmosphere and sliding wear tests were carried out. The oxidation kinetics was followed during oxidation test. The microstructure was observed by optical and scanning electron microscopies. The oxides formed on the surface of the samples were analyzed by XRD and EDS. The thickness of the oxide scales and the mass gain were measured after oxidation test. The results showed that the behavior of all the grades differed. The oxide scale of HSS and HSS-G grades was fine and their friction coefficient was low. The weight gain after oxidation test of HSS was high. Hi-Cr and M-Hi-Cr grades presented highly porous oxide layer and an important increase of the friction coefficient during wear test. ICDP and M-ICDP had intermediate behavior.