Highly transparent Yb:Y2O3 ceramics obtained by solid-state reaction and combined sintering procedures

(Y_0.87-xLa_0.1Zr_0.03Yb_x)₂O₃ (x?=?0.02, 0.04, 0.05) transparent ceramics were obtained by solid-state reaction and combined sintering procedures with La₂O₃ and ZrO₂ as sintering additives. A method based on two-step intermediate sintering in air followed by vacuum sintering was applied in order to control the densification and grain growth of the samples during the final sintering process. The results indicate that La₂O₃ and ZrO₂ co-additives can improve the microstructure and optical properties of Yb:Y₂O₃ ceramics at relatively low sintering temperature. On the other hand, the addition of Zr⁴⁺ ions leads to the formation of dispersed scattering volumes in the ceramic bodies. Transmittance of 78.8% was measured for the 2.0?at% Yb:Y₂O₃ ceramic sample at the wavelength of 1100?nm. The spectroscopic properties of Yb:Y₂O₃ ceramics were investigated at room temperature. The obtained results show that the absorption cross-section at 978?nm is in the range of 2.08?×?10^–20 to 2.36?×?10^–20 cm², whereas the emission cross-section at 1032?nm is ~1.0?×?10^–20 cm².     

Compressive properties of pristine and SiC-Te-added MgB2 powders,green compacts and spark-plasma-sintered bulks

Pristine and (SiC+Te)-added MgB₂ powders, green and spark plasma sintered (SPS) compacts were investigated from the viewpoint of quasi-static and dynamic (Split-Hopkinson Pressure Bar, SHPB) compressive mechanical properties The amount of the additive (SiC+Te) was selected to be the optimum one for maximization of the superconducting functional parameters. Pristine and added MgB₂ show very similar compressive parameters (tan δ, fracture strength, Vickers hardness, others) and fragment size in the SHPB test. However, for the bulk SPSed samples the ratio of intergranular to transgranular fracturing changes, the first one being stronger in the added sample. This is reflected in the quasi-static K_IC that is higher for the added sample. Despite this result, sintered samples are brittle and have roughly similar fragmentation behavior as for brittle engineering ceramics. In the fragmentation process, the composite nature of our samples should be considered with a special focus on MgB₂ blocks (colonies) that show the major contribution to fracturing. The Glenn-Chudnovsky model of fracturing under dynamic load provides the closest values to our experimental fragment size data.     

Malware clustering using suffix trees

Clustering is an important problem in malware research, as the number of malicious samples that appear every day makes manual analysis impractical. Although these samples belong to a limited number of malware families, it is difficult to categorize them automatically as obfuscation is involved. By extracting relevant features we can apply clustering algorithms, then only analyze a couple of representatives from each cluster. However, classic clustering algorithms that compute the similarity between each pair of samples are slow when a large collection is involved. In this paper, the features will be strings of operation codes extracted from the binary code of each sample. With a modified suffix tree data structure we can find long enough substrings that correspond to portions of a program’s code. These substrings must be filtered against a database of known substrings so that common library code will be ignored. The items that have common substrings above a certain threshold will be grouped into the same cluster. Our algorithm was tested with data extracted from real-world malware and constructed quality clusters.     

Gold-silver alloy nanoshells: a new candidate for nanotherapeutics and diagnostics

We have developed novel gold-silver alloy nanoshells as magnetic resonance imaging (MRI) dual T₁ (positive) and T₂ (negative) contrast agents as an alternative to typical gadolinium (Gd)-based contrast agents. Specifically, we have doped iron oxide nanoparticles with Gd ions and sequestered the ions within the core by coating the nanoparticles with an alloy of gold and silver. Thus, these nanoparticles are very innovative and have the potential to overcome toxicities related to renal clearance of contrast agents such as nephrogenic systemic fibrosis. The morphology of the attained nanoparticles was characterized by XRD which demonstrated the successful incorporation of Gd(III) ions into the structure of the magnetite, with no major alterations of the spinel structure, as well as the growth of the gold-silver alloy shells. This was supported by TEM, ICP-AES, and SEM/EDS data. The nanoshells showed a saturation magnetization of 38 emu/g because of the presence of Gd ions within the crystalline structure with r₁ and r₂ values of 0.0119 and 0.9229 mL mg^-1 s^-1, respectively (Au:Ag alloy = 1:1). T₁- and T₂-weighted images of the nanoshells showed that these agents can both increase the surrounding water proton signals in the T₁-weighted image and reduce the signal in T₂-weighted images. The as-synthesized nanoparticles exhibited strong absorption in the range of 600-800 nm, their optical properties being strongly dependent upon the thickness of the gold-silver alloy shell. Thus, these nanoshells have the potential to be utilized for tumor cell ablation because of their absorption as well as an imaging agent.     

Intensity parameters of Tm doped Sc2O3 transparent ceramic laser material

This work is focused on spectral investigations of Tm³⁺ doped Sc₂O₃ transparent ceramic as potential material for diode-pumped solid-state laser emitting around 2 μm. In the context of the Judd-Ofelt (J-O) theory a series of spectroscopic parameters such as J-O intensity parameters, oscillator strengths, radiative transitions probabilities, and radiative lifetimes as well as branching ratios are evaluated. The gain cross-sections which lead to an estimation of the probable operating laser wavelength for the ³F₄ → ³H₆ Tm³⁺ laser transition were also calculated.     

An empirical evaluation of P system testing techniques

This paper presents the existing techniques for P system testing and performs an empirical evaluation of their fault-detection efficiency. The comparison is performed using mutation testing and, based on the results obtained, some improved testing methodologies are proposed.     

SEM‐EDX and microftir studies on evaluation of protection capacity of some thin phosphate layers

This article presents the SEM‐EDX and microFTIR study and the corrosion behavior of new five types of phosphated coatings obtained by coprecipitation in acid aqueous medium of some metal cations, pursuing the influence of the addition of other cations and a moderator of precipitation, on the uniformity and compactness of the layers and on the morphology of dendritic structure of Zn(II) and Fe(II) phosphates. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.