Evaluating hyperspectral imaging of wetland vegetation as a tool for detecting estuarine nutrient enrichment

Nutrient enrichment and eutrophication are major concerns in many estuarine and wetland ecosystems, and the need is urgent for fast, efficient, and synoptic ways to detect and monitor nutrients in wetlands and other coastal systems across multiple spatial and temporal scales. We integrated three approaches in a multi-disciplinary evaluation of the potential for using hyperspectral imaging as a tool to assess nutrient enrichment and vegetation responses in tidal wetlands. For hyperspectral imaging to be an effective tool, spectral signatures must vary in ways correlated with water nutrient content either directly, or indirectly via such proxies as vegetation responses to elevated nitrogen. Working in Elkhorn Slough, central California, where intensive farming practices generate considerable runoff of fertilizers and pesticides, we looked first for long- and short-term trends among temporally ephemeral point data for nutrients and other water quality characters collected monthly at 18 water sampling stations since 1988. Second, we assessed responses of the dominant wetland plant, Salicornia virginica (common pickleweed) to two fertilizer regimes in 0.25 m² experimental plots, and measured changes in tissue composition (C, H, N), biomass, and spectral responses at leaf and at canopy scales. Third, we used HyMap hyperspectral imagery (126 bands; 15–19 nm spectral resolution; 2.5 m spatial resolution) for a synoptic assessment of the entire wetland ecosystem of Elkhorn Slough. We mapped monospecific Salicornia patches (～ 56–500 m²) on the ground adjacent to the 18 regular water sampling sites, and then located these patches in the hyperspectral imagery to correlate long-term responses of larger patches to water nutrient regimes. These were used as standards for correlating plant canopy spectral responses with nitrogen variation described by the water sampling program. There were consistent positive relationships between nitrogen levels and plant responses in both the field experiment and the landscape analyses. Two spectral indices, the Photochemical Reflectance Index (PRI) and Derivative Chlorophyll Index (DCI), were correlated significantly with water nutrients. We conclude that hyperspectral imagery can be used to detect nutrient enrichment across three spatial and at least two temporal scales, and suggest that more quantitative information could be extracted with further research and a greater understanding of physiological and physical mechanisms linking water chemistry, plant properties and spectral imaging characteristics.     

Rotating magnetic field-driven flows in conductive inhomogeneous media: Part I—Numerical study

This paper presents a numerical study of the Lorentz force and fluid flow induced by a rotating magnetic field in a medium with a nonhomogeneous electric conductivity placed in a cylindrical vessel with insulated walls. The nonhomogeneity is modeled by the presence of a solid and a liquid phase of different electrical conductivity. The solid phase is located orthogonally to the axis of rotation, which corresponds to the case of unidirectional solidification. The simulations were performed for different locations of the solid front and different ratios of the electrical conductivity, σ _s /σ _l =0.2... 10. Here σ _s and σ _l are the electric conductivity of the solid and liquid phases, respectively. The results showed that the difference between electrical conductivity of solid and liquid phases has a noticeable effect on the mean-time Lorentz force and the velocity: namely, the presence of the solid phase (σ _s >σ _l ) leads to an increase of the Lorentz force and fluid flow in the cylinder.     

GaAs pHEMT-based technology for microwave applications in a volume MMIC production environment on 150-mm wafers

The establishment of a 150-mm (6-in) gallium arsenide (GaAs) facility is described together with the development of very high yielding and cost-effective semiconductor device technologies and a manufacturing capacity of over 40000 wafers/annum. The background to the demand for very high volumes of RF products for this market is discussed, together with the prospects for future growth. The paper describes recent process development by the utilization of a data-driven yield management system to support the delivery of high-quality RF products to customers. Finally, "end of line" DC and RF testing of finished 150-mm GaAs pHEMT foundry wafers is described, enabling scalar measurements of power, noise, and intermodulation products as well as vector measurements of S-parameters and noise parameters at frequencies of up to 40 GHz.     

On the hot-carrier-induced post-stress interface trap generation inn-channel MOS transistors

A continued fast interface trap generation is observed in n-channel MOS transistors after termination of the hot-carrier stress. The magnitude of this post-stress effect is strongly dependent on the conditions of the preceding stress, on the post-stress conditions and on the process parameters. For measurements at 293 K, a simple model is proposed which is based on the release of hydrogen by the thermal detrapping of holes, and which can explain the observed dependencies. The importance of the post-stress D_it-generation is illustrated for the case of dynamic stress conditions where it can lead to an apparently deviating degradation behavior     

An adaptive non‐conforming finite‐element method for Reissner–Mindlin plates

Adaptive algorithms are important tools for efficient finite‐element mesh design. In this paper, an error controlled adaptive mesh‐refining algorithm is proposed for a non‐conforming low‐order finite‐element method for the Reissner–Mindlin plate model. The algorithm is controlled by a reliable and efficient residual‐based a posteriori error estimate, which is robust with respect to the plate's thickness. Numerical evidence for this and the efficiency of the new algorithm is provided in the sense that non‐optimal convergence rates are optimally improved in our numerical experiments. Copyright © 2003 John Wiley & Sons, Ltd.     

Effects of different cooking methods on the formation of food mutagens in meat

Hamburgers and chicken fillets were cooked in convection ovens, deep‐fried or contact fried and analysed for mutagenic activity using the Ames test. For the three different convection ovens, the cooking parameters studied included the presence of steam, air velocity, air temperature and holding time. For deep‐frying and contact frying, the cooking parameters included cooking temperature and cooking time. In cooked hamburgers, mutagenic activity was only detected in those that had been deep‐fried. In chicken fillets, mutagenic activity was detected in samples prepared with all cooking methods, being highest in the deep‐fried samples. Factorial analysis indicated that heat transfer was the most important factor affecting mutagenic activity. High temperature and high air velocity in the convection ovens enhanced mutagenic activity. The presence of steam reduced the mutagenic activity, except when high temperature was used in combination with high air velocity. In chicken fillets, high mutagenic activity correlated to high weight loss during cooking. Pan‐fried chicken fillets were analysed using high performance liquid chromatography (HPLC) and the mutagenic/carcinogenic heterocyclic amines 2‐amino‐3,8‐dimethylimidazo[4,5‐f ]‐quinoxaline (MeIQx), 2‐amino‐1‐methyl‐6‐phenylimidazo‐[4,5‐b]‐pyridine (PhIP) and the co‐mutagenic heterocyclic amine Norharman (9H‐pyrido[3,4‐b]‐indole) were identified. The HPLC fractions were tested for mutagenic activity and, apart from the mutagenic fractions corresponding to MeIQx and PhIP, several mutagenic fractions were detected that did not correspond to known heterocyclic amines.     

Several ways to produce porous carbon monoliths by template assisted routes

Several ways to produce microporous and mesoporous carbon monoliths by template assisted synthesis routes are described. Pressed zeolite (HY) and silica powder tablets have been used as templates. Sucrose acts as a carbon precursor and as a binder between the carbon particles as well. In the case of zeolite template, the carbon porosity could be increased by additional loading of the template with ethene. Due to the balance between mechanic stability and porosity of the carbon monolith, an optimal amount of sucrose is required. The final products were characterized by low temperature nitrogen adsorption.