Design and development of energy efficient solar tunnel dryer for industrial drying

A natural convection poly house walk-in type solar tunnel dryer was designed and used for drying surgical cotton on industrial scale. This article deals with the basic design criterion used for development of solar tunnel dryer and result of drying of surgical cotton in actual use. A batch of surgical cotton of 600 kg by mass, having an initial moisture content of 40% wet basis from which 210 kg of water is required to be removed to get a desired moisture content of about 5% wet basis, is used as the drying load in designing the dryer. A drying time of 7–8 h is assumed for the anticipated test location (Udaipur, 27° 42′ N, 75° 33′ E) with an expected average solar irradiance of 5.5 kW m⁻². Average cost of drying one batch of surgical cotton in a solar tunnel dryer has been worked out to be approximately 4.63 USD as compared to 30.00 USD in the existing diesel fired dryer.     

Assessing Mobile Technology Usage for Knowledge Dissemination among Farmers in Punjab

Agriculture-based precise and accurate information needs to be disseminated promptly to farmers so that better decisions such as managing farm fields, making continuous and scientific changes in their production systems and grabbing advantage of market opportunities can be made. In this paper, mobile technology is assessed for the agriculture information dissemination system. A survey has been conducted to find out potential technology, related to the use of the Internet and mobile among farmers in the state of Punjab in India, to deliver agriculture-related information to them. Results show that agricultural information system needs to be developed based on the mass communication technology such as mobile systems. It is also noted that localization and native language of farmers are the concerns to be incorporated into the systems. It has been focused that the use of soft-computing techniques in conjunction with communication networks, for inferring the decision regarding best practices for agricultural activities, is helpful in the development of these systems.     

Study of Non-lubricated Wear of the Al–Si Alloy Composite Reinforced with Different Ratios of Coarse and Fine Size Zircon Sand Particles at Different Ambient Temperatures

In the present work, a detailed study of ceramic reinforcement of different size ranges in the matrix of LM13 alloy on the friction and wear behavior has been carried out. For this purpose, LM13/Zr composite containing 10 wt% zircon sand particles of different size ranges using stir casting process has been developed. Zircon sand particles were incorporated in two ways: firstly as single size reinforcement and secondly dual size reinforcement. Durability of the composites was tested by finding the wear rate of the composite against the steel disk by pin-on-disk method. Addition of zircon sand particles in the LM13 alloy improves the hardness of the composite as well as wear resistance. Wear rate of the developed composites was tested under different test conditions by varying the applied load and ambient temperatures. Wear rate of the composite changes significantly at different ambient temperatures. SEM analysis of the worn surfaces was done to know the operative wear mechanism.     

Lymphatic Transport of α-Linolenic Acid and Its Conversion to Long Chain n-3 Fatty Acids in Rats Fed Microemulsions of Linseed Oil

In the present study we evaluated the uptake of ALA and its conversion to EPA + DHA in rats given linseed oil (LSO) in native form or as a microemulsion in whey protein or in lipoid. In a single oral dose study in which rats maintained on rodent pellets deficient in ω-3 fatty acids were intubated with 0.35 g LSO in lipoid, the amount of ALA present in lymph was increased reaching a maximum concentration of 16.23 mg/ml at 2.5 h. The amount of ALA present in lymph was increased to a maximum level of 10.95 mg/ml at 4 h in rats given LSO as a microemulsion in whey protein. When LSO was given without emulsification, the amount of ALA present in lymph was found to reach a maximum level of 7.08 mg/ml at 6 h. A similar result was observed when weaning rats were intubated with 0.15 g of LSO per day for a period of 60 days. Higher levels of ALA by 41 and 103 % were observed in lymph lipids of rats given microemulsions of LSO in whey protein and in lipoid respectively as compared to rats given LSO without pre-emulsification. Very little conversion of ALA to EPA and DHA was observed in lymph lipids but higher amounts of EPA + DHA was observed in liver and serum of rats given LSO in microemulsion form. This study indicated that ALA concentration in lymph lipids was increased when LSO was given in microemulsion form in lipoid and further conversion to EPA and DHA was facilitated in liver and serum.     

Differential scanning calorimetric studies on structured lipids from coconut oil triglycerides containing stearic acid

Triglycerides from coconut oil contain high levels of lauric acid. They were replaced by incremental amounts of stearic acid by interesterification reactions catalyzed by immobilized lipase (IM 60 from Rhizomucor miehei). The reactions were carried out in organic solvents such as hexane. Maximum incorporation of stearic acid was observed by 4 h at 37vv°C or by 2 h at 60vv°C when triglycerides to fatty acid (stearic acid) ratio was maintained at 1v:Ң. The stearic acid level in coconut oil triglycerides was increased from an initial value of 2% to 60% under these conditions. The stearic acid replaced lauric, myristic, and palmitic acids in unmodified triglycerides. A major portion of stearic acid incorporated was found in positions 1 and 3 of triglycerides. Differential scanning calorimetry indicated that stearic acid enrichment increased the solid fat content and also the higher melting polymorphs in modified lipids. The studies also indicated that low melting polymorphic forms of coconut oil triglycerides are converted to higher melting forms by stearic acid enrichment. The modified lipids thus obtained can find use in various food applications.     

Docosahexaenoic acid and other dietary polyunsaturated fatty acids suppress leukotriene synthesis by mouse peritoneal macrophages

The efficacy of individual ω-t-3 polyunsaturated fatty acids (PUFA) in altering eicosanoid synthesis in peritoneal macrophages was studied by feeding mice for 10 days a diet containing 2 wt% fat, which included 0.5 wt% ethyl esters of eicosapentaenoic acid (EPA), docosahexaenoic acid (DHA) or linolenic acid (LNA). Upon stimulation with calcium ionophore A23187, macrophages from these animals produced significantly lower amounts of leukotriene C₄, leukotriene B₄ and 12-hydroxyeicosatetraenoic acid, prostaglandin E₂ and 6-keto prostaglandin F_1α compared with those obtained from animals on the diets containing olive oil or safflower oil. The decrease in leukotriene synthesis was similar in the animals fed DHA, EPA or LNA diets. This depression of eicosanoids by DHA and EPA was associated with decreased levels of arachidonic acid (AA); however, LA that altered eicosanoids did not have the same effect on AA levels.     

Performance evaluation of a diesel engine fueled with methyl ester of castor seed oil

In this investigation, castor methyl ester (CME) was prepared by transesterification using potassium hydroxide (KOH) as catalyst and was used in four stroke, single cylinder variable compression ratio type diesel engine. Tests were carried out at a rated speed of 1500 rpm at different loads. Straight vegetable oils pose operational and durability problems when subjected to long term usages in diesel engines. These problems are attributed to high viscosity, low volatility and polyunsaturated character of vegetable oils. The process of transesterification is found to be an effective method of reducing vegetable oil viscosity and eliminating operational and durability problems. The important properties of methyl ester of castor seed oil are compared with diesel fuel. The engine performance was analysed with different blends of biodiesel and was compared with mineral diesel. It was concluded that the lower blends of biodiesel increased the break thermal efficiency and reduced the fuel consumption. The exhaust gas temperature increased with increasing biodiesel concentration. The results proved that the use of biodiesel (produced from castor seed oil) in compression ignition engine is a viable alternative to diesel.     

Impulse Pressure Assisted Diffusion Bonding of Low Carbon Steel Using Silver Interlayer

In the present study, impulse pressure assisted diffusion bonding of low carbon steel was carried out using silver interlayer. To study the influence of input process parameters namely bonding temperature (T), maximum pulse pressure (P), and number of pulses (N), experiments of diffusion bonding were conducted according to the Taguchi L9 orthogonal array. To reveal the typical bond interface characteristics, selected samples were examined by scanning electron microscopy (FESEM) equipped with energy dispersive spectroscopy (EDS). The EDS analysis revealed a diffusion affected zone at the interface due to the diffusion of silver and iron across the interface. Lap joints were developed to measure the shear strength of the diffusion bonds. The optimum level of bonding temperature, maximum pulse pressure and number of pulses (875 °C, 10 MPa and 10 pulses) were identified. The ANOVA results indicated that bonding temperature had the highest statistical effect of 66.37% on shear strength followed by number of pulses and maximum pulse pressure. The fracture surface of the lap joints was also examined by FESEM and X-ray diffraction analysis.     

Electrical conductivity of poly(vinyl alcohol)/carbon nanotube multilayer thin films: Influence of sodium polystyrene sulfonate mediated carbon nanotube dispersion

This investigation was aimed to enhance the dispersibility of multi-walled carbon nanotubes (MWCNT) using sodium polystyrene sulfonate (Na-PSS) polyelectrolyte. Subsequently, electrically conducting, multi-layer thin films are prepared utilizing layer by layer assembly method with poly(vinyl alcohol) as a host matrix. The highest extent of MWCNT dispersion was observed in MWCNT:Na-PSS ratio of 1:9 (wt/wt), which was estimated from UV-Vis spectroscopic analysis. Zeta potential measurements of Na-PSS modified MWCNT dispersion showed large negative potentials ranging from −52 to −64 mV in the most stable pH range of 4 to 10, suggesting the colloidal stability is due to the long-range repulsive nature of electrostatic interactions from negatively charged sulfonate groups. Complementary molecular dynamics simulations showed that adsorption of Na-PSS imparts a large negative potential to the carbon nanotube surface, which increases with an increase in Na-PSS concentration. The multi-layer thin film of (1:9) MWCNT:Na-PSS exhibited a DC electrical conductivity of 2.96 × 10² S/m.     

Extrusion of highly filled flexible polymer sheet

Highly-filled polymer systems include color masterbatches, feedstocks for powder injection molding, and rigid sheets with high levels of flame retardants, but they have not been explored for flexible sheet. This work investigated the (a) selecting a polymer matrix with enough melt strength and flexibility to form a stable sheet with high filler loading, (b) the maximum achievable filler loading for the sheet, and (c) optimizing the process of extruding a highly-filled flexible polymer system. Extrusion grade low-density polyethylene (LDPE) provided sufficient flexibility and permitted a maximum filler loading of 36 vol% (~78 wt%). Good dispersion of the nanoparticle filler, however, required two passes through multiple screw extruders and a small reduction in the viscosity of the LDPE. Sheet with thickness of 415 μm, surface roughness of <1 μm, and sufficient flexibility was extruded continuously at a rate of 10 m/min., but it required a more traditional coat hanger manifold to prevent filler hang up in the sheet die. The filler particles were distributed uniformly through the core and skin of the sheet, giving the sheet good mechanical properties.