Stress wave propagation in adhesively bonded functionally graded cylinders: an improved model

This study presents an improved mathematical model to analyse the stress wave propagation in adhesively bonded functionally graded (FG) circular cylinders (butt joint) under an axial impulsive load. The volume fractions of the material constituents in the upper and lower cylinders were functionally tailored through the thickness of each cylinder using a power-law. The effective material properties of both cylinders, which are made of aluminum (Al) and silicon carbide (SiC), at any point were predicted by using the Mori–Tanaka homogenization scheme. In this improved model, the governing equations of the wave propagation include the spatial derivatives of local mechanical properties and were discretized by means of the finite difference method. The influence of these spatial derivatives and the compositional gradient exponent on the displacement and stress distributions of the joint was investigated. The material composition variations of both cylinders affected the displacement and stress fields whereas the compositional gradient exponent had a minor effect. The stress concentrations were alleviated in time, the displacement and stress distributions/variations around/along the upper and lower cylinder-adhesive interfaces were significantly affected by the adhesive layer. The spatial derivatives also affected the temporal histories of the displacement and stress components evaluated at the selected critical points of the upper cylinder, adhesive layer and lower cylinder. The consideration of the spatial local material derivatives provided a more accurate mathematical model of wave propagations through the graded layered structures.     

Investigation of thermal residual stresses during laser ablation of tantalum carbide coated graphite substrates using micro-Raman spectroscopy and COMSOL multiphysics

Laser ablation of high-temperature ceramic coatings results in thermal residual stresses due to which the coatings fail by cracking and debonding. Hence, the measurement of such residual stresses during laser ablation process holds utmost importance from the view of performance of coatings in extreme conditions. The present research aims at investigating the effect of laser parameters such as laser pulse energy, scanning speed and line spacing on thermal residual stresses induced in tantalum carbide-coated graphite substrates. Residual stresses were measured using micro-Raman spectroscopy and correlated with Raman peak shifts. Transient thermal analysis was performed using COMSOL Multiphysics to model the single ablated track and residual stresses were reported at low, moderate and high pulse energy regimes. The results showed that the initial laser conditions caused higher tensile residual stresses. Moderate pulse energy regime comprised higher compressive residual stresses due to off centre overlapping of the laser pulses. Higher pulse energy (250 μJ), higher scanning speed (1000 mm/s) and moderate line spacing (20 μm) caused accumulation of tensile residual stresses during the final stage of laser ablation. The deviation of experimental residual stresses from COMSOL numerical model was attributed to unaccounted additional stresses induced during thermal spraying process and deformation potentials in the numerical model.     

The microbiology of sheep carcasses processed in a modern Indian abattoir

A study has been conducted on the microbiology of sheep carcasses processed in a modern abattoir. The data revealed that careful handling at the different stages of processing of sheep reduced the level of microbial contamination of carcasses. Processing steps such as evisceration and washing did not increase the microbial counts on the carcass surface. Sources of microbial contamination in the abattoir were examined. It was observed that skin, floor washings, intestinal contents and gambrels were the major sources of microbial contamination. Seasonality did not have any effect on the microbial contamination of carcasses. The study revealed that total plate counts in 86·6% of the carcasses ranged between 3·0–4·9log/cm². The counts of coliforms, staphylococci, enterococci and psychrotrophs were low. Pathogens such as Salmonella were not detected. The microbial counts were well within the generally acceptable levels. These findings demonstrated hygienic handling of carcasses. Shoulder and neck are the critical points for microbiological sampling as these sites showed higher microbial counts. Micrococcus and Staphylococcus predominated among microorganisms associated with carcasses. It was noted that differences occurred in microbial types of carcasses processed in tropical and temperate climates. The data generated in a model facility procided useful information for improving meat handling practices.     

Forced convection in cross flow of power law fluids over a tube bank

The forced convective heat transfer characteristics for incompressible power-law fluids past a bundle of circular cylinders have been investigated numerically. The cylinder-to-cylinder hydrodynamic interactions have been approximated via a simple cell model. The momentum and energy equations have been solved using a finite difference based numerical method for a range of physical and kinematic conditions. The role of the two commonly used thermal boundary conditions, namely, constant temperature or constant heat flux, on heat transfer characteristics has also been studied. Extensive numerical results elucidating the effect of shear-thinning viscosity on the values of Nusselt number have been obtained for Peclet numbers ranging from 1 to 5000, Reynolds number in the range 1-500, flow behaviour index 1?n?0.5 and three values of voidages, namely, 0.4, 0.5 and 0.6, typical of tubular heat exchangers and tube banks. Under all conditions, varying levels of enhancement in Nusselt number are observed due to shear-thinning behaviour. The surface averaged Nusselt number shows strong dependence on the values of voidage, power-law index, Reynolds and Peclet numbers. The paper is concluded by presenting comparisons with the scant experimental results available in the literature.     

Automatic joint classification and segmentation of whole cell 3D images

We present a machine learning tool for automatic texton-based joint classification and segmentation of mitochondria in MNT-1 cells imaged using ion-abrasion scanning electron microscopy (IA-SEM). For diagnosing signatures that may be unique to cellular states such as cancer, automatic tools with minimal user intervention need to be developed for analysis and mining of high-throughput data from these large volume data sets (typically ). Challenges for such a tool in 3D electron microscopy arise due to low contrast and signal-to-noise ratios (SNR) inherent to biological imaging. Our approach is based on block-wise classification of images into a trained list of regions. Given manually labeled images, our goal is to learn models that can localize novel instances of the regions in test datasets. Since datasets obtained using electron microscopes are intrinsically noisy, we improve the SNR of the data for automatic segmentation by implementing a 2D texture-preserving filter on each slice of the 3D dataset. We investigate texton-based region features in this work. Classification is performed by k-nearest neighbor (k-NN) classifier, support vector machines (SVMs), adaptive boosting (AdaBoost) and histogram matching using a NN classifier. In addition, we study the computational complexity vs. segmentation accuracy tradeoff of these classifiers. Segmentation results demonstrate that our approach using minimal training data performs close to semi-automatic methods using the variational level-set method and manual segmentation carried out by an experienced user. Using our method, which we show to have minimal user intervention and high classification accuracy, we investigate quantitative parameters such as volume of the cytoplasm occupied by mitochondria, differences between the surface area of inner and outer membranes and mean mitochondrial width which are quantities potentially relevant to distinguishing cancer cells from normal cells. To test the accuracy of our approach, these quantities are compared against manually computed counterparts. We also demonstrate extension of these methods to segment 3D images obtained using electron tomography.     

An improved analytical model of 4H-SiC MESFET incorporating bulk and interface trapping effects

An improved analytical model for the current-voltage (I-V) characteristics of the 4H-SiC metal semiconductor field effect transistor (MESFET) on a high purity semi-insulating (HPSI) substrate with trapping and thermal effects is presented. The 4H-SiC MESFET structure includes a stack of HPSI substrates and a uniformly doped channel layer. The trapping effects include both the effect of multiple deep-level traps in the substrate and surface traps between the gate to source/drain. The self-heating effects are also incorporated to obtain the accurate and realistic nature of the analytical model. The importance of the proposed model is emphasised through the inclusion of the recent and exact nature of the traps in the 4H-SiC HPSI substrate responsible for substrate compensation. The analytical model is used to exhibit DC I-V characteristics of the device with and without trapping and thermal effects. From the results, the current degradation is observed due to the surface and substrate trapping effects and the negative conductance introduced by the self-heating effect at a high drain voltage. The calculated results are compared with reported experimental and two-dimensional simulations (Silvaco^®-TCAD). The proposed model also illustrates the effectiveness of the gate-source distance scaling effect compared to the gate-drain scaling effect in optimizing 4H-SiC MESFET performance. Results demonstrate that the proposed I-V model of 4H-SiC MESFET is suitable for realizing SiC based monolithic circuits (MMICs) on HPSI substrates.     

Moisture diffusion through (hexadecyltrimethylammonium bromide ‐ Indian bentonite)/(vinylester) nanocomposites in artificial seawater and demineralized water

This paper compares the moisture diffusion properties of organomodified (Indian Bentonite nanoclay)/vinylester containing different amounts of nanoclay on exposure to demineralized water and artificial seawater at room temperature. Moisture uptake behavior of (Indian Bentonite)/vinylester was investigated and compared with that of neat vinylester. Addition of 5 wt% nanoclay decreased the diffusivity and permeability of vinylester in artificial seawater medium, but these diffusion parameters increased in demineralized water medium. Degradation in glass transition temperature and microhardness of the nanocomposites were much greater in specimens aged in demineralized water than in those in artificial seawater medium. Moisture diffusion behavior of the specimens was analyzed by Fick's law and the Langmuir model. The aged specimens were chemically analyzed by using infrared spectroscopy after aging for 146 days. A significant amount of leached organic species was detected in the demineralized water–aged specimens but the same was absent in those aged in artificial seawater. J. VINYL ADDIT. TECHNOL., 22:441–451, 2016. © 2015 Society of Plastics Engineers     

Electrical and Thermal Properties of Twin-Screw Extruded Multiwalled Carbon Nanotube/Epoxy Composites

This paper presents the experimental results of dispersing multiwalled carbon nanotubes (MWNTs) into epoxy (space grade structural adhesive) nanocomposites using co-rotating twin screw extrusion process. Two sets of specimens were prepared; set 1 with ultrasonication for predispersing MWNT before extrusion and set 2 direct dispersion of MWNT in the extruder. MWNT was loaded up to 8 vol.% in both the sets. The specimens were characterized for room temperature volume and surface resistivities as per ASTM D257 using Keithley Model 6517 and for thermal conductivity in the temperature range ?50 to 150 °C as per ASTM E 1530 using Thermal Conductivity Instrument (TCI) 2022 SX211. The volume resistivity of sets 1 and 2 decreased to an extent of 10¹¹ and 10⁹ respectively. The surface resistivity drop was of the order of 10⁹ for both the sets. These drops corresponded to the maximum MWNT loading of 8 vol.%. Electrical conductivity values of the specimens were fitted into the Power Law Model to evaluate the critical exponent. Both sets 1 and 2 showed increase in thermal conductivity with increase in temperature in the testing range. Thermal conductivity increased with increase in filler loading and the maximum increase was 60% at 150 °C in case of 8 vol.% MWNT nanocomposites for set 1. The corresponding value for the set 2 was 25%. Thermal conductivity values were predicted using Lewis Nielson model. DSC of the specimens showed increase in glass transition temperature with increase in filler loading. The dispersion of the nanofillers was studied using SEM and the surface morphology using AFM.     

Processing mango stones for fat

Stones of mango fruit (Mangifera indica) were processed for recovery of fat and the fat refined. Mango kernel fat is potentially edible and can substitute for tallow and cacao butter. Mango kernal meal can be used as a sizing material and as a feed.