Studies of Bainitic Steel for Rail Applications Based on Carbide-Free,Low-Alloy Steel

Metallurgical and Materials Transactions A - This paper describes the development and characterisation of bainitic steel for rail applications based on carbide-free, low-alloy steel. The results...     

Characteristics of tiger nut milk: effects of milling

A standard method for the extraction of tiger nut milk has been introduced. It has been shown that, although milling duration improves the yield of tiger nut milk solids and its nutrient composition, there is a quantifiable loss of nutrient in the pressing residue during milk extraction. Milling duration improved the colloidal stability of the milk against creaming during 16 h of storage. A higher milling intensity resulted in the aggregation of biological polymers which resulted in colloidal destabilisation. Milling improved the lightness and stability and reduced browning rate of the tiger nut milk during storage. This report is important for the production of tiger nut milk of consistent and comparable characteristics. Milling has been introduced as a processing method for the qualitative and quantitative modulation of the properties of tiger nut milk. It is recommended to develop further strategies to improve the colloidal stability of tiger nut milk as a beverage.     

Biohythane production from organic waste: Recent advancements,technical bottlenecks and prospects

The availability of fossil fuels is a major factor that determines the economy of a country. However, possible exhaustion of fossil fuel deposits as well as increased pollution, and other adverse effects on the environment has prompted us to search for alternative fuels. This resulted in the development of hythane, a blend of hydrogen with methane, at concentrations of 10%–30%. The breakdown of organic substrates using sequential dark fermentation (DF) and anaerobic digestion (AD) leads to biohythane production. The quality and quantity of biohythane can be improved by altering the following aspects: selection, development, and/or genetic engineering of suitable microbial consortium; the use of cheap, appropriate substrates; improved design of bioreactors; and the implementation of two-stage fermentation system. This review focusses on the mechanism of biohythane production and the different aspects involved in increasing both its production rate and quality. A comparative study has also been done to demonstrate the superiority of biohythane over other biofuels.     

Rising sludge in secondary settlers due to denitrification

High suspended solids concentrations in settler effluents can be caused by rising sludge, which is the effect of flotation of solids by nitrogen gas resulting from biological denitrification. Many factors influence the nitrogen gas bubble evolution. The most important factor is the rate of biological denitrification. Factors like nitrogen gas solubility and oxygen concentration in settler influent only play a minor role. The hydraulic retention time in the bottom part of the settler is, for all practical purposes, so high that sufficient nitrogen gas will be generated at temperatures above 20°C, if the nitrate content in the influent to the settler is above the critical one. For temperatures around 20°C the critical nitrate-nitrogen concentration is 6–8 g NO₃⁻-N/m³. The best measure in order to avoid rising sludge is to denitrify the wastewater in the treatment process ahead of the settler.     

Effect of blend ratio and elongation flow on the morphology and properties of epoxy resin‐poly(trimethylene terephthalate) blends

The effect of processing conditions on the morphology of polymer blends is a topic of tremendous practical interest especially for thermoset–thermoplastic blends. The effect of blend ratio and the nature of the flow field (shear flow vs. elongation flow) on the morphology is followed here using blends of diglycidyl ether of bisphenol A (DGEBA)‐poly(trimethylene terephthalate) (PTT). Morphology of the blends prepared by the conventional melt mixing technique is compared with that prepared by using an elongation mixer (RMX device invented by Muller et al.). The blends prepared by the elongation mixer showed excellent transparency and higher storage modulus at room temperature than the conventional mixer. In the case of samples prepared by the RMX device T_g of the epoxy phase has been shifted to lower temperatures indicating a molecular level mixing between PTT and DGEBA. However the conventional melt mixed samples showed only a marginal shift in T_g to low temperatures indicating that the system is not as miscible as that prepared by the RMX device. The use of RMX device for thermoset–thermoplastic blends is novel and no work has been reported in this relation. The properties of the blends were strongly affected by the composition and the crystallization of the semicrystalline PTT phase. POLYM. ENG. SCI., 55:1679–1688, 2015. © 2014 Society of Plastics Engineers