Tuning the Behavior of Au and Pt Catalysts for the Chemoselective Hydrogenation of Nitroaromatic Compounds

Efficient catalysts for the synthesis of functionalized anilines from the corresponding substituted nitroaromatics should combine an excellent chemoselectivity with a high hydrogenation activity. Attempts to increase the activity of the Au/TiO₂ catalyst and to improve the selectivity of traditional Pt catalysts, based on a previous understanding of the mode of action of supported gold and platinum nanoparticles, are reviewed and discussed.     

Creep and shrinkage of recycled aggregate concrete

This paper presents the results of experimental research into concrete produced by replacing the natural aggregates with recycled aggregates coming from construction waste and concrete work demolitions. The main aim of this work was to determine creep and shrinkage variations experienced in recycled concrete, made by replacing the main fraction of the natural aggregate with a recycled aggregate coming from waste concrete and comparing it to a control concrete. The substitution percentages were 20%, 50% and 100%. Fine natural aggregate was used in all cases and the amount of cement and water–cement ratio remained constant in the mixture. It was possible to state that the evolution of deformation by shrinkage and creep was similar to a conventional concrete, although the results after a period of 180 days showed the influence of the substitution percentage in the recycled aggregates present in the mixture. In the case when 100% coarse natural aggregate was replaced by recycled aggregate there was an increase in the deformations by creep of 51% and by shrinkage of 70% as compared to those experienced by the control concrete.     

Thermal characterization of mixtures of nitrotriazolone with HMX and RDX

Abstract

Thermal characterization of mixtures of nitrotria-zolone (NTO) with octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) has been carried out by means of differential scanning calorimetry and thermogravimetric analysis. It has been found that HMX decomposition temperature remains constant through the whole composition range. However NTO decomposition temperature decreases as the NTO/HMX ratio decreases. The RDX decomposition temperature keeps constant in all compositions studied. The RDX melting temperature decreases few degrees. The NTO decomposition appears at lower temperatures as the RDX content increases.     

Effect of Cu additions over the lattice parameter and hardness of the NiAl intermetallic compound

A set of NiAl intermetallic alloys was prepared with several Cu additions, exploring the Ni-rich and the Al-rich side of the NiAl intermetallic compound. An abrupt increment in hardness was obtained in the Al-rich alloys, while the opposite occurs in the Ni-rich alloys. This may be due to the presence of β-phase (Ni,Cu) Al and γ′-phase (Ni,Cu)₃Al, in addition to the variation of the β-phase lattice parameter.     

Effect of decortication and protease treatment on the kinetics of liquefaction,saccharification, and ethanol production from sorghum

BACKGROUND: This study analyzes the effect of decortication and protease treatment on the kinetics of liquefaction, saccharification and ethanol production from sorghum kernels. In general, bioethanol yields from sorghum are lower than those from maize. This has been attributed to reduced access of starch‐degrading enzymes due to the crosslinked protein net in the sorghum kernels. RESULTS: Liquefaction is described as a zero order kinetics process, with reaction rates enhanced by protease treatment. The use of protease almost doubled the liquefaction rate in both whole and decorticated sorghum, compared with untreated kernels. During saccharification of decorticated sorghum, protease treatment significantly affected the glucose/starch yield and the glucose concentration profile over time. When compared with maize, protease treatment of decorticated sorghum resulted in superior ethanol production rates. Specific ethanol yields during fermentation were statistically comparable with those for maize. CONCLUSION: Protease treatment of decorticated sorghum kernels can impart substantial economic benefits in terms of improvement of bioethanol yield (13% over whole sorghum) and in reduced fermentation time (approximately 50% with respect to maize). Copyright © 2010 Society of Chemical Industry     

Structural cast-in-place SFRC: technology,control criteria and recent applications in spain

Steel fiber-reinforced concrete (SFRC) has been traditionally applied to pavements or tunnelling. However, classical structural applications have not been developed so fully. This paper examines different reasons which may justify the lack of this application. Several technologies on the fiber dosing system are presented and assessed. The SFRC reception control and acceptance criteria have been developed in accordance with the upcoming Spanish code. Adopting such criteria is justified on previous experiences and test viability under cast-in-place conditions. Some lines of action to promote the use of fibers with structural purposes are proposed. Two examples of recent applications are also set out, and a justification of the convenience of SFRC in terms of structural evaluation and durability under seawater conditions is provided.     

A model of ventilation of the healthy human lung

This paper presents a model of the lung mechanics which simulates the pulmonary alveolar ventilation. The model includes aspects of: the alveolar geometry; pressure due to the chest wall; pressure due to surface tension determined by surfactant activity; pressure due to lung tissue elasticity; and pressure due to the hydrostatic effects of the lung tissue and blood. The cross-sectional area of the lungs in the supine position derived from computed tomography is used to construct a horizontally layered model, which simulates heterogeneous ventilation distribution from the non-dependent to the dependent layers of the lungs. The model is in agreement with experimentally measured hysteresis of the pressure-volume curve of the lungs, static lung compliance, changes in lung depth during breathing and density distributions at total lung capacity (TLC) and residual volume (RV). In the dependent layers of the lungs, alveolar collapse may occur at RV, depending on the assumptions concerning lung tissue elasticity at very low alveolar volumes. The model simulations showed that ventilation increased with depth in the lungs, although not as pronounced as observed experimentally. The model simulates alveolar ventilation including all of the mentioned components of the respiratory system and to be validated against all the above mentioned experimental data.     

Spectroscopic ellipsometry study of Cu2ZnGeSe4 and Cu2ZnSiSe4 poly-crystals

We report the room temperature spectroscopic ellipsometry study of Cu₂ZnGeSe₄ and Cu₂ZnSiSe₄ crystals, grown by modified Bridgman technique. Optical measurements were performed in the range 1.2–4.6 eV. The spectral dependence of the complex pseudodielectric functions as well as pseudo- complex refractive index, extinction coefficient, absorption coefficient, and normal-incidence reflectivity of Cu₂ZnGeSe₄ and Cu₂ZnSiSe₄ crystals were derived. The observed structures in the optical spectra were analyzed by Adachi's model and attributed to the band edge transitions and higher lying interband transitions. The parameters such as strength, threshold energy, and broadening, corresponding to the E₀, E_1A and E_1B interband transitions, have been determined using the simulated annealing algorithm.     

High level communication functionalities for wireless sensor networks

In this paper we show how to establish a reliable and efficient high level communication system in a randomly deployed network of sensors equipped with directional antennas. This high level communication system enables the programming of the sensor network using high level communication functionalities without the burden of taking care of their physical capacities (low range, unidirectional links, single frequency, presence of collisions, etc.). The high level communication functionalities we offer include point-to-point communication, point-to-area communication, and one-to-all communication. The basic idea to implement this system is to simulate a virtual network that emerges from the ad-hoc network using self-organization, self-discovery and collaborative methods. We also analyse the efficiency, scalability and robustness of the proposed protocols.     

Global optimization in property‐based interplant water integration

This article presents a new global optimization method for the interplant water integration based on properties to characterize streams with numerous components. The problem is formulated as an mixed‐integer non‐linear programming (MINLP) model based on a superstructure that involves all possible options of interest (i.e., reuse and recycle in the same and to other plants and a set of shared treatment units). This formulation exhibits multiple local minima, and to overcome this problem, this article proposes effective branching rules in addition to two new reformulations for the upper bound (integer feasible solution) and the lower limit (relaxed solution), which are incorporated into a spatial branch and bound procedure to handle the bilinear terms in the model. The objective consists in finding the configuration with the minimum total annual cost. Results show that the global optimal solution (involving significant reductions in the fresh water consumption) is reached in few iterations and short central processing unit (CPU) time. © 2012 American Institute of Chemical Engineers AIChE J, 59: 813–833, 2013