A Full Connectable and High Scalable Key Pre-distribution Scheme Based on Combinatorial Designs for Resource-Constrained Devices in IoT Network

Considering the internet of things (IoT), end nodes such as wireless sensor network, RFID and embedded systems are used in many applications. These end nodes are known as resource-constrained devices in the IoT network. These devices have limitations such as computing and communication power, memory capacity and power. Key pre-distribution schemes (KPSs) have been introduced as a lightweight solution to key distribution in these devices. Key pre-distribution is a special type of key agreement that aims to select keys called session keys in order to establish secure communication between devices. One of these design types is the using of combinatorial designs in key pre-distribution, which is a deterministic scheme in key pre-distribution and has been considered in recent years. In this paper, by introducing a key pre-distribution scheme of this type, we stated that the model introduced in the two benchmarks of KPSs comparability had full connectivity and scalability among the designs introduced in recent years. Also, in recent years, among the combinatorial design-based key pre-distribution schemes, in order to increase resiliency as another criterion for comparing KPSs, attempts were made to include changes in combinatorial designs or they combine them with random key pre-distribution schemes and hybrid schemes were introduced that would significantly reduce the design connectivity. In this paper, using theoretical analysis and maintaining full connectivity, we showed that the strength of the proposed design was better than the similar designs while maintaining higher scalability.

     

Applying dual-tree complex discrete wavelet transform and gamma modulating function for simulation of ground motions

The aim of this paper is to develop a stochastic-parametric model for the generation of synthetic ground motions (GMs) which are in accordance with a real GM. In the proposed model, the dual-tree complex discrete wavelet transform (DT-CDWT) is applied to real GMs to decompose them into several frequency bands. Then, the gamma modulating function (GMF) is used to simulate the wavelet coefficients of each level. Consequently, synthetic wavelet coefficients are generated using extracted model parameters and then synthetic GM is extracted by applying the inverse DT-CDWT to synthetic wavelet coefficients. This model simulates the time–frequency distribution of both wide-frequency and narrow-frequency bandwidth GMs. Besides being less time consuming, it simulates several dominant frequency peaks at any moment in the time duration of GM, because each frequency band is separately simulated by the gamma function. Moreover, the inelastic response spectra of synthetic GMs generated by the proposed model are a good estimate of target ones. Using the random sign generator in the proposed model, it is possible to generate any number of synthetic GMs in accordance with a recorded one. Because of these advantages, the proposed model is suitable for using in performance-based earthquake engineering.

     

An integrated methodology to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes

Today, air pollution, smoking, use of fatty acids and ready‐made foods, and so on, have exacerbated heart disease. Therefore, controlling the risk of such diseases can prevent or reduce their incidence. The present study aimed at developing an integrated methodology including Markov decision processes (MDP) and genetic algorithm (GA) to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes. First, the efficiency of GA is evaluated against Grey Wolf optimization (GWO) algorithm, and then, the superiority of GA is revealed. Next, the MDP is employed to estimate the risk of cardiovascular disease. For this purpose, model inputs are first determined using a validated micro‐simulation model for screening cardiovascular disease developed at Tehran University of Medical Sciences, Iran by GA. The model input factors are then defined accordingly and using these inputs, three risk estimation models are identified. The results of these models support WHO guidelines that provide medicine with a high discount to patients with high expected LYs. To develop the MDP methodology, policies should be adopted that work well despite the difference between the risk model and the actual risk. Finally, a sensitivity analysis is conducted to study the behavior of the total medication cost against the changes of parameters.     

Proactive task migration with a self-adjusting migration threshold for dynamic thermal management of multi-core processors

Request for more computation power steadily forces designers to provide more powerful processors using more number of cores on a single chip. The increasing complexity of processors leads to higher integration density, power density, and temperature. For avoiding thermal emergencies, various dynamic thermal management techniques have been presented. In this paper, we present a novel online self-adjusting temperature threshold schema for dynamic thermal management to minimize both average and peak temperature with very low performance overhead. Our proposed algorithm adjusts migration threshold according to workload and hardware platforms. The experimental results indicate that our technique can significantly decrease the average and peak temperature compared to Linux standard scheduler, and two well-known thermal management techniques: PDTM and TAS.     

Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

Removal of iron from milk of lime to produce pure precipitated calcium carbonate

ABSTRACT

Milk of lime (MOL) suspension is widely utilized in many industries; however, in some of the applications, such as the production of precipitated calcium carbonate (PCC), the suspension must be of high purity and quality. In other words, the amounts of iron and magnesium should be so little so that the final PCC product would be of high quality. The effects of initial temperature, quicklime particle size, amount of initial solid present, agitation rate, and time on the recovery of hydrated lime and iron/magnesium reduction efficiency were investigated through a central composite design (CCD) of experiments. The iron reduction efficiency and the weight recovery of hydrated lime were obtained as 91% and 98.5%, respectively. The reduction of magnesium was not significant in this stage. Moreover, approximately the whole existing SiO₂ was eliminated.     

Mechanical and viscoelastic properties of polyethylene-based microfibrillated composites from 100% recycled resources

In this study, recycled polyethylene (rPE) based microfibrillated composites (MFCs) were developed while incorporating recycled poly(ethylene terephthalate) (rPET) and recycled polyamide 6 (rPA) as the reinforcing fibrillar phases at a given weight ratio of 80 wt% (rPE)/20 wt% (rPET or rPA). The blends were first melt processed using a twin-screw extruder. The extrudates were then cold stretched at a drawing ratio of 2.5 to form rPET and rPA fibrillar structures. Next, the pelletized drawn samples were injection molded at the barrel temperatures below the melting temperatures of rPET and rPA. The tensile, three-point bending, impact strength, dynamic thermomechanical, and rheological properties of the fabricated MFCs were analyzed. The effects of injection molding barrel temperature (i.e., 150°C and 190°C) and extrusion melt processing temperature (i.e., 250°C and 275°C) on the generated fibrillar structure and the resultant properties were explored. A strong correlation between the fibrillar morphology and the mechanical properties with the extrusion and injection molding temperatures was observed. Moreover, the ethylene/n-butyl acrylate/glycidyl methacrylate (EnBAGMA) terpolymer and maleic anhydride grafted PE (MAH-g-PE) were, respectively, melt processed with rPE/rPET and rPE/rPA6 blends as compatibilizers. The compatibilizers refined the fibrillar structure and remarkably influenced mechanical properties, specifically the impact strength.     

An integrated semantic-based approach in concept based video retrieval

Multimedia content has been growing quickly and video retrieval is regarded as one of the most famous issues in multimedia research. In order to retrieve a desirable video, users express their needs in terms of queries. Queries can be on object, motion, texture, color, audio, etc. Low-level representations of video are different from the higher level concepts which a user associates with video. Therefore, query based on semantics is more realistic and tangible for end user. Comprehending the semantics of query has opened a new insight in video retrieval and bridging the semantic gap. However, the problem is that the video needs to be manually annotated in order to support queries expressed in terms of semantic concepts. Annotating semantic concepts which appear in video shots is a challenging and time-consuming task. Moreover, it is not possible to provide annotation for every concept in the real world. In this study, an integrated semantic-based approach for similarity computation is proposed with respect to enhance the retrieval effectiveness in concept-based video retrieval. The proposed method is based on the integration of knowledge-based and corpus-based semantic word similarity measures in order to retrieve video shots for concepts whose annotations are not available for the system. The TRECVID 2005 dataset is used for evaluation purpose, and the results of applying proposed method are then compared against the individual knowledge-based and corpus-based semantic word similarity measures which were utilized in previous studies in the same domain. The superiority of integrated similarity method is shown and evaluated in terms of Mean Average Precision (MAP).     

Free vibration analysis of double-viscoelastic nano-composite micro-plates reinforced by FG-SWCNTs based on the third-order shear deformation theory

Microsystem Technologies - In this paper, free vibration analysis of a double viscoelastic nano-composite plate system reinforced by functionally graded single-walled carbon nanotubes (FG-SWCNT)...