Imperative role of electron microscopy in toxicity assessment: A review

Electron microscope (EM) was developed in 1931 and since then microscopical examination of both the biological and non-biological samples has been revolutionized. Modifications in electron microscopy techniques, such as scanning EM and transmission EM, have widened their applicability in the various sectors such as understanding of drug toxicity, development of mechanism, criminal site investigation, and characterization of the nano-molecule. The present review summarizes its role in important aspects such as toxicity assessment and disease diagnosis in special reference to SARS-COV2. In the biological system, EM studies have elucidated the impact of toxicants at the ultra-structural level in various tissue in conformity to physiological alterations. Thus, EM can be concluded as an important tool in toxicity assessment and disease prognosis.     

Nature inspired 21 branches sneezewort/Achillea ptarmica plant growth pattern–shaped antenna for Ku‐band applications

This reported paper presents the design and analysis of wideband nature inspired planar antenna of 46 × 18 × 1.6 mm³ size, designed using FR4 (Flame Retardant) substrate. The antenna patch is delineated from the growth pattern of sneezewort plant with supplementary notion of golden ratio in branching and branch width. The total number of branches in each stage follows the Fibonacci series and the branch width is calculated from the golden ratio concept. Starting from one feed line and two branches, the maximum numbers of branches are increased to 20. There has been significant enhancement in the radiation performance of proposed geometry by increasing the number of branches to 21 and by modifying ground with T‐shaped slot. The antenna covers wide impedance bandwidth of 8.2 to 16.5 GHz by possessing stable radiation characteristics.     

Development of LTCC micro-hotplate with PTC temperature sensor for gas-sensing applications

Low temperature co-fired ceramic (LTCC) micro-hotplates show wide applications in gas sensors and micro-fluidic devices. It is easily structured in three-dimensional structures. This paper presents the low power consumption micro-hotplates which were developed with PTC (positive temperature coefficient) temperature sensor and inter-digitated electrodes. The paper presents two different structures for micro-hotplate with platinum as a heating element. The PTC temperature sensor using two different materials viz. PdAg and platinum paste are developed with micro-hotplates. The simulation has been achieved through COMSOL for LTCC and alumina micro-hotplates. The temperature variation with power consumption has been measured for the developed LTCC micro-hotplates. The change in resistance of PTC temperature sensors was measured with micro-hotplate temperature. The aim of this study was to place a temperature sensor with the gas sensor module to measure and control the temperature of micro-hotplate. A SnO₂ sensing layer is coated on LTCC micro-hotplate using screen printing and characterized for the sensing of carbon monoxide gas (CO). This study will be beneficial for designing hotplates based on LTCC technology with low power consumption and better stability of temperature for gas-sensing applications.     

An intelligent EGWO-SCA-CS algorithm for PSS parameter tuning under system uncertainties

This paper proposes a novel hybrid technique called enhanced grey wolf optimization-sine cosine algorithm-cuckoo search (EGWO-SCA-CS) algorithm to improve the electrical power system stability. The proposed method comprises of a popular grey wolf optimization (GWO) in an enhanced and hybrid form. It embraces the well-balanced exploration and exploitation using the cuckoo search (CS) algorithm and enhanced search capability through the sine cosine algorithm (SCA) to elude the stuck to the local optima. The proposed technique is validated with the 23 benchmark functions and compared with state-of-the-art methods. The benchmark functions consist of unimodal, multimodal function from which the best suitability of the proposed technique can be identified. The robustness analysis also presented with the proposed method through boxplot, and a detailed statistical analysis is performed for a set of 30 individual runs. From the inferences gathered from the benchmark functions, the proposed technique is applied to the stability problem of a power system, which is heavily stressed with the nonlinear variation of the load and thereby operating conditions. The dynamics of power system components have been considered for the mathematical model of a multimachine system, and multiobjective function has been framed in tuning the optimal controller parameters. The effectiveness of the proposed algorithm has been assessed by considering two case studies, namely, (i) the optimal controller parameter tuning, and (ii) the coordination of oscillation damping devices in the power system stability enhancement. In the first case study, the power system stabilizer (PSS) is considered as a controller, and a self-clearing three-phase fault is considered as the system uncertainty. In contrast, static synchronous compensator (STATCOM) and PSS are considered as controllers to be coordinated, and perturbation in the system states as uncertainty in the second case study.     

Interlayer bonding between thermoplastic composites and metals by in-situ polymerization technique

Fiber-metal laminates (FMLs) offer the superior characteristics of polymer composites (i.e., light weight, high strength and stiffness) with the ductility and fracture strength of metals. The bond strength between the two dissimilar materials, composite and metal, dictates the properties and performance of the FMLs. The bonding becomes more critical when the polymer matrix is thermoplastic and hydrophobic in nature. This work employed a novel bonding technique between thermoplastic composites and a metal layer using six different combinations of organic coatings. The flexural, and interlaminar shear strength of the thermoplastic fiber metal laminates (TP-FMLs) were examined to investigate the bond strengths in the different cases along with fracture characteristics revealed from the tested samples using scanning electron microscopy. The viscoelastic performance of the fabricated TP-FMLs were also investigated using the dynamic mechanical thermal analysis method.     

Improving through-thickness conductivity of carbon fiber reinforced polymer using carbon nanotube/polyethylenimine at the interlaminar region

The through-thickness conductivity of carbon fiber reinforced polymer (CFRP) composite was increased by incorporating multiwalled carbon nanotubes in the interlaminar region. Carbon nanotubes (CNTs) were dispersed in a polyethylenimine (PEI) binder, which was then coated onto the carbon fiber fabric. Standard vacuum-assisted resin infusion process was applied to fabricate the composite laminates. This modification technique aims to enhance the electrical conductivity in through-thickness direction for the purpose of nondestructive testing, damage detection, and electromagnetic interference shielding. CNT concentrations ranging from 0 to 0.75 wt% were used and compared to pristine CFRP samples (reference). The through-thickness conductivity of the CFRP exhibited an improvement of up to 781% by adopting this technique. However, the dispersion of CNT in PEI led to a viscosity increase and poor wetting properties which resulted in the formation of voids/defects, poor adhesion (as shown in scanning electron micrographs) and the deterioration of the mechanical properties as manifested by interlaminar shear strength and dynamic mechanical analysis measurements.     

Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Enzymatic degradation,electronic, and thermal properties of graphite- and graphene oxide-filled biodegradable polylactide/poly(ε-caprolactone) blend composites

Commodity polymers are the most widely used materials for electronic packaging applications. However, they are nondegradable and causing serious environmental damage. Addressing this challenge, the relative effects of graphite (G) and graphene oxide (GO) dispersion on the enzymatic degradation, electronic properties, thermal degradation, and crystallization behavior of enzyme degradable polylactide/poly(ε-caprolactone) blend composites is investigated. Owing to the oxygenated surface functionalities and excellent thermal conductivity arising from the carbon structure, the randomly dispersed GO particles do not provide electrical pathways and facilitate large enhancements in the electrical resistivity (126%) and thermal conductivity (72%) of the blend composites. However, while the G particles enhanced the thermal conductivity of the composites, they had little effect on enzymatic degradation. Furthermore, they reduced the electrical resistivity, particularly at high concentration (0.25 wt % G), as a result of the conducting delocalized electrons in the G structure and due to network formation. We also find that the energy required to initiate and propagate the thermal degradation process for GO-filled blend composites is relatively lower than that of G-filled blend composite. However, the former composites show higher crystallization rate coefficients value than that of G-filled composites and the neat blend, thereby providing better crystallization ability and miscibility with the matrix. In summary, the GO-filled blend composites are observed to show potential for use in sustainable materials for thermal management applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47387.