Reduced‐order method for mathematical modeling of multiphase dc‐dc converter

A multiphase dc‐dc converter is effective for miniaturization and achieving high‐power density in a switching power supply. However, its mathematical modeling becomes complex as the phase number of the circuit increases. This study proposes a new modeling method to derive a reduced‐order method in a simple manner. The frequency characteristics of the reduced‐order model are fit to those of the original mathematical model of the multiphase dc‐dc converter. Therefore, the efficacy of the proposed method is validated.     

Phase Relations and Volume Changes of Hafnia under High Pressure and High Temperature

Using multi-anvil high-pressure devices and synchrotron radiation, X-ray in situ observations of HfO₂ under high pressure and high temperature have been performed to investigate its phase relations and compression behavior. An orthorhombic phase (orthoI) is stable from 4 to 14.5 GPa below 1250°–1400°C and transforms to a tetragonal phase, which is one of the high-temperature forms of HfO₂, above these temperatures. Another orthorhombic phase (orthoII) with a cotunnite-type structure appears above 14.5 GPa. OrthoII is stable up to 1800°C at 21 GPa. OrthoII is quenchable to ambient conditions. The orthoI-to-orthoII transition is accompanied by ∼8 vol% decrease. The bulk moduli of orthoI and orthoII at room temperature are 220 and 312 GPa, respectively. This low compressibility of orthoII indicates that it is a potential candidate for very hard materials.     

Kinetic study on the first stage during thermal degradation of polystyrene

The kinetic parameters of the first stage of polystyrene degradation have been investigated to elucidate the reaction mechanisms using the flow reactor system. The decrease in molecular weight of polystyrene was recorded at minute intervals over the temperature range 310°–390°C. Generally, the first and second stages were observed by thermogravimetric analysis (t.g.a.), however in the early stage of the degradation volatile yields of at least 5% occurred. Therefore, using t.g.a. analysis it is difficult to detect this earlier stage. It became evident that the first stage in the earlier part of the reaction could be detected by g.p.c. analysis. We have observed the hidden kinetic parameters of the nature of the first stage of the polystyrene degradation. The results indicate that the main chains were degraded randomly with the small quantitative volatile groups in the first stage and the rates of decrease in molecular weight in the first stage against reaction temperatures were evaluated as log k_s = 12.0 ? 41300/RT.     

A genetic algorithm for the optimal sequential partitioning problem

The optimal sequential problem is defined as the problem of finding the minimum cost partition of the nodes of a directed acyclic graph into subsets of a given size, subject to the constraint that the precedence relationships among the elements are satisfied. A heuristic algorithm based on tabu search has been proposed for this problem [2]. However, there is a tendency for the solutions obtained by tabu search to become trapped in bad local optima in parallel graphs with random edge costs. In this paper we present a genetic algorithm for the optimal sequential partitioning problem. We develop an effective two‐point partial order crossover satisfying sequential conditions, which preserve better blocks that have a larger sum of edge costs. In this crossover we introduce the roulette selection method to escape local optima. We also assess the effectiveness of the algorithm. The results show that this proposed algorithm outperforms any other algorithm using tabu search in terms of solution quality. © 2001 Scripta Technica, Electr Eng Jpn, 135(4): 43–51, 2001     

Solute atmosphere around an edge dislocation in Al-based ternary alloys

We evaluated the solute atmosphere around a moving dislocation and the dragging stress due to the atmosphere in binary and ternary Al-based alloys in terms of a chemical potential gradient by modifying the method proposed by Yoshinaga et al. In ternary alloys, we analyzed formation of the complex solute atmosphere around a straight edge dislocation and the dragging stress in terms of a misfit parameter of a solute element (positive or negative) and an interaction parameter between solute elements (attractive or repulsive).     

Screening of patients with maternally transmitted diabetes for mitochondrial gene mutations in the tRNA[Leu(UUR)] region

To investigate the prevalence and clinical characteristics of diabetes mellitus caused by mitochondrial gene mutations in the tRNA[Leu(UUR)] region, a known 'hot spot' for pathogenic mutations, we screened 440 diabetic patients with diabetic mothers for 11 mitochondrial gene mutations reported in mitochondrial neuromuscular disorders; nucleotide pairs (np) 3250, 3251, 3252, 3254, 3256, 3260, 3271, 3291, 3302 and 3303 in addition to an A to G transition at np 3243. The dot-blot hybridization method using 32P-labelled sequence-specific oligonucleotides as probes was used. One subject carrying a T to C transition at np 3271 and seven carrying the A to G transition at np 3243 were identified, while none of the other diabetic patients screened had these mutations in the tRNA[Leu(UUR)] region. The patient with the 3271 mutation, a 39-year-old male, had excellent glycaemic control with diet alone and had neither hearing impairment nor symptoms suggesting mitochondrial myopathy, encephalopathy, lactic acidosis and stroke-like episodes (MELAS). Thus, among patients with maternally transmitted diabetes, the prevalence of the 3271 mutation was approximately one-seventh that of the 3243 mutation, and other mutations are even more rare in the mitochondrial tRNA[Leu(UUR)] region.     

Formation of hexachlorobenzene from dusts of an electric arc furnace used in steelmaking: effect of temperature and dust composition

A certain amount of hexachlorobenzene (HCB), designated a persistent organic pollutant (POP) by the Stockholm Convention, is emitted from an electric arc furnace (EAF) used in the steelmaking process. To understand the formation and decomposition behaviors of HCB during the treatment of waste gases from an EAF, characterization of dust samples from EAFs in different plants was conducted. Dusts 1 and 2 were bag filter dusts collected from a common steel plant and a special steel plant, respectively. The initial concentrations of HCB in dusts 1 and 2 were 62 and < 0.1 ng/g of dust, respectively. Then a series of heating experiments was carried out with these dust samples under various conditions. The formation of HCB from both dusts was not significant under an Ar atmosphere, although the amount of formation from dust 1 slightly increased with an increase in the holding temperature. Under an Ar--20% O2 atmosphere, however, a remarkable amount of HCB formed from dust 1 above 573 K. A certain amount of HCB was also formed from dust 2, even though the initial concentration of HCB was very low. Moreover, the coexistence of metallic compounds such as CuCl2 had a significant accelerating effect on the formation of HCB.     

The preparation,swelling characteristics,and albumin adsorption and release behaviors of a novel chitosan-based polyampholyte hydrogel

A novel chitosan (Ch)-based polyampholyte hydrogel was prepared from Ch dissolved in a 1:1 (v/v) mixture of 10% aqueous acetic acid and N-methyl-2-pyrrolidinone (NMP) by simple crosslinking using 1,2,3,4-butanetetracarboxylic dianhydride (BTCA). The detailed structure of the hydrogel was determined via FTIR and solid-state ¹³C NMR spectroscopic analyses. The swelling behavior of the hydrogels was strongly dependent on the BTCA feed ratio, and the hydrogels exhibited a pH-responsive swelling ratio that was influenced by the presence of both cationic NH₃⁺ and anionic COO^? groups within their molecular structures. The Ch hydrogels also exhibited bovine serum albumin (BSA) adsorption capacity, which was maximal at pH 4.5, consistent with the isoelectric point of BSA (4.7). In addition, the BSA adsorption capacity of the hydrogel decreased with the increasing ionic strength of the adsorption medium, indicating that the capacity of the hydrogel to adsorb BSA is facilitated by hydrophobic as well as electrostatic interactions between the hydrogels and the BSA molecules. In addition, a high desorption ratio (89%) of BSA was achieved in aqueous solutions at pH 2.0.