Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

Nano and Microtechnologies for the Study of Magnetotactic Bacteria

Magnetotactic bacteria (MTB) naturally synthesize magnetic nanoparticles that are wrapped in lipid membranes. These membrane‐bound particles, which are known as magnetosomes, are characterized by their narrow size distribution, high colloidal stability, and homogenous magnetic properties. These characteristics of magnetosomes confer them with significant value as materials for biomedical and industrial applications. MTB are also a model system to study key biological questions relating to formation of bacterial organelles, metal homeostasis, biomineralization, and magnetoaerotaxis. The similar size scale of nano and microfluidic systems to MTB and ease of coupling to local magnetic fields make them especially useful to study and analyze MTB. In this Review, a summary of nano‐ and microtechnologies that are developed for purposes such as MTB sorting, genetic engineering, and motility assays is provided. The use of existing platforms that can be adapted for large‐scale MTB processing including microfluidic bioreactors is also described. As this is a relatively new field, future synergistic research directions coupling MTB, and nano‐ and microfluidics are also suggested. It is hoped that this Review could start to bridge scientific communities and jump‐start new ideas in MTB research that can be made possible with nano‐ and microfluidic technologies.     

Pedestrian gender classification using combined global and local parts-based convolutional neural networks

Pattern Analysis and Applications - The identification of a person’s gender plays an important role in various visual surveillance and monitoring applications which are growing more...     

Development,testing, and evaluation of road safety poster to reduce jaywalking behavior at intersections

Jaywalking is a traffic violation that contributes significantly to vehicle–pedestrian crashes at intersections. Although public education campaigns     

Affixing poly(methyl methacrylate-co-acrylic acid) nanospheres with trimethoxyvinylsilane on silicon solar module to enhance its power conversion efficiency

Poly(methyl methacrylate-co-acrylic acid) [P(MMA-co-AA)] incorporated with 0–9 wt% of trimethoxyvinylsilane (TMVS) has been studied to investigate the effect of TMVS on the adhesion properties of P(MMA-co-AA) nanospheres coated on silicon substrate as well as on the power conversion efficiency (PCE) of silicon solar module coated with the polymer nanospheres. The incorporation of 7 and 9 wt% of TMVS into the copolymer has been found to render the copolymer stronger adhesion to glass substrate than the samples with lower amount of TMVS in them. The coating of the P(MMA-co-AA) nanospheres on the glass surface of solar module increases the light harvesting efficiency by serving as an anti-reflective layer. Solar module coated with an array of P(MMA-co-AA) nanospheres with 7 wt% of TMVS yielded the highest PCE enhancement of 98% under the illumination of an AM1.5 solar simulator. The natural weathering results indicate that the copolymer with 7% of TMVS was able to withstand prolonged natural weathering exposure and remained reasonably effective in PCE enhancement up to 130 days of outdoor exposure. This study demonstrates a cost-effective technique to bind [P(MMA-co-AA)] nanospheres onto the silicon surface of solar module via siloxane linkages and thus increases the PCE of the solar module effectively. The T_g of the copolymer increased linearly from 110.31 to 118.42 °C when 0–9 wt% of TMVS was added into it. Thermogravimetry results indicate that the incorporation of TMVS does not give any significant effect on the T_d of the copolymer, which occurs at about 390 °C.

     

Mechanisms and models for anaerobic granulation in upflow anaerobic sludge blanket reactor

Upflow anaerobic sludge blanket (UASB) reactor has been employed in industrial and municipal wastewater treatment for decades. However, the long start-up period required for the development of anaerobic granules seriously limits the application of this technology. In order to develop the strategy for rapid UASB start-up, the mechanisms for anaerobic granulation should be understood. This paper attempts to provide a up-to-date review on the existing mechanisms and models for anaerobic granulation in the UASB reactor, which include inert nuclei model, selection pressure model, multi-valence positive ion-bonding model, synthetic and natural polymer-bonding model, Capetown's model, spaghetti theory, syntrophic microcolony model, multi-layer model, secondary minimum adhesion model, local dehydration and hydrophobic interaction model, surface tension model, proton translocation-dehydration theory, cellular automaton model and cell-to-cell communication model. Based on those previous works, a general model for anaerobic granulation is also proposed. It is expected that this paper would be helpful for researchers to further develop a unified theory for anaerobic granulation and technology for expediting the formation of the UASB granules.     

"Weak" ultrasonic pre-treatment on anaerobic digestion of flocculated activated biosolids

This study examined how "weak" ultrasonic pre-treatment affects anaerobic digestion of waste biosolids, treated with a cationic polyelectrolyte flocculant. In relation to pre-treatment, the term "weak" used refers to the fact that the total ultrasonic energy input to biosolids is insufficient to fully disrupt its floc structure or the cell walls, as described in the literature. Methane production potential, floc characteristics (size, morphology and zeta-potential) and process parameters (chemical oxygen demands and oxidative-reductive potentials) were monitored, as the digestion was tested. The presence of polyelectrolyte flocculants enhanced methane production within 6 days of digestion (phase I), but inhibited the digestion thereafter (phase II). Following pre-treatment by sonication (0.33 W/mL, 20 min), the methane productions of both original and flocculated biosolids significantly increased. The underlying mechanisms of weak ultrasonic pre-treatment are discussed.     

Hydroelastic response of a box-like floating fuel storage module modeled using non-conforming quadratic-serendipity Mindlin plate element

Presented herein are the hydroelastic responses of a floating fuel storage module under wave action. The box-like fuel storage module is modeled by an equivalent solid plate. For the analysis, a non-conforming quadratic-serendipity (NC-QS) element based on the Mindlin plate theory was developed. In this element, we make use of the reduced integration method and the superposition of non-conforming modes onto the basis function of the 8-node element in order to prevent spurious modes and shear locking phenomena. Thus the element may be applied for both thick and thin plates. The solution for the hydroelastic response involves solving the coupled plate–water equation and the water equation numerically using the hybrid finite element–boundary element (FE-BE) method. The coupled plate–water equation is derived by equating the force term in the Mindlin plate equation with the wave pressure distribution obtained from the linearized Bernoulli equation; whereas the boundary integral equation relates the displacement of the plate and water velocity potential using the free-surface Green’s function. Results of the displacement and water velocity potential are found to be more accurate when compared with existing solutions for special cases. Moreover, the stress resultants computed are significantly more accurate than previous results as spurious modes are eliminated.