Liquid-liquid extraction and separation of total rare earth (RE) metals from polymetallic manganese nodule leaching solution

The study on the solvent extraction for quantitative and selective separation of total rare earth metals from the polymetallic nodule leach liquor was investigated. The typical leach liquor bearing 0. 094 g/L total rare earth, 0. 23 g/L Mn, 0.697 g/L Cu, 0.2 g/L Fe, 0.01 g/L Co and 0.735 g/L Ni was subjected to the removal iron content by precipitation method using Ca(OH)2 at pH 3.95, prior to solvent extraction of rare earth metals. Three different organo-phosphoric acid reagents(D2EHPA, PC88 A, Cyanex 272) were used to ascertain their performances and selectivity towards the loading of rare earth metals in presence of other base metals. Based on the results of eq. pH effect, the performances of above three extractants followed the order as: D2EHPA>PC88A>Cyanex 272. To ensure the absence of extraction of base metals(Cu, Co, Ni), the eq. pH of the solution was optimized at the level of 2.21, though higher rare earth metal extraction efficiency was observed at higher eq. pH with either of the extractants. The complete process flow diagram for substantial recovery of total rare earth was developed using D2 EHPA. Extraction isotherm plot was constructed at A:O=12:1, 3-stages and pHe=2.21, using 0.8 mol/L D2 EHPA and the predicted condition of this study was further confirmed by 6-Cycles Counter Current Simulation(CCS) study. The stripping of total rare earth from loaded organic phase(LO) was conducted using HCl solution. Mc-Cabe Thiele diagram study carried out at A:O=1:5 using 4 mol/L HCl showed that three theoretical stages were needed for quantitative stripping of total rare earth. The subsequent stripped solution resulted thus led to contain total rare earth of 5.6 g/L indicating a very high enrichment of total metals by solvent extraction(SX) process.     

Magnetic separation studies on ferruginous chromite fine to enhance Cr:Fe ratio

The Cr:Fe ratio (chromium-to-iron mass ratio) of chromite affects the production of chrome-based ferroalloys. Although the lit-erature contains numerous reports related to the magnetic separation of di...     

Optimizing the concentration of quaternary ammonium dimethacrylate monomer in bis-GMA/TEGDMA dental resin system for antibacterial activity and mechanical properties

Four novel quaternary ammonium dimethacrylate monomers named IMQ (side alkyl chain length from 12 to 18) were synthesized with the aim to synthesize dental resin with antibacterial activity. All of IMQs were added into bis-GMA/TEGDMA dental resin system with a series of mass ratio (5, 10, and 20 wt%), double bond conversion (DC), flexural strength (FS), modulus of elasticity (FM) and biofilm formation inhibitory effect were studied. According to the results of DC, FS, FM, and the biofilm inhibitory effect, IMQ-16 containing polymer had the best comprehensive properties, and the optimal concentration of IMQ-16 in bis-GMA/TEGDMA dental resin would be in the range of 5–10 wt%.     

Experimental Novel Silane System in Adhesion Promotion Between Dental Resin and Pretreated Titanium

Five silane blends were evaluated as experimental adhesion-promoter primers. First, five organosilane monomers (silicon esters), 3-acryloxypropyltrimethoxysilane, 3-methacryloxypropyltrimethoxysilane, 3-glycidoxypropyltrimethoxysilane, tetrakis-(2-ethyloxyethoxy)silane and bis-[3-(triethoxysilyl)propyl]tetrasulfide, were diluted to 1% (v/v) and blended with a non-functional cross-linking silane, 1,2-bis-(triethoxysilyl)ethane (1%), in 95% ethanol. After activation, each blend was applied to silica-coated Ti coupons. A resin based on bis-phenol-A-diglycidyldimethacrylate was then bonded and photo-polymerized as stubs to the pretreated Ti coupons. Half of the specimens were stored in dry conditions and half were artificially aged by thermo-cycling. The primers containing 3-acryloxypropyltrimethoxysilane and 3-methacryloxypropyltrimethoxysilane produced significantly higher shear bond strength values than the control silane, a standard pre-activated product used in clinical dentistry.     

Harnessing the sun for an evergreen revolution: a study of solar-powered irrigation in Bihar,India

In 2012, the government of Bihar revived 34 non-functioning public tubewells using solar panels. The performance of 16 of these wells over 12 months was tracked and analyzed using data from tubewell operators and 240 farmers. Access to affordable irrigation from solar pumps led to a 9–10% increase in productivity of rice and wheat. Furthermore, in a severe drought, farmers could grow paddy in the entire area irrigated by solar pumps, when nearly 40% of other land was left fallow. Solar pumps can help increase crop productivity, reduce the cost of irrigation, and make agriculture more resilient to climate change.     

In vitro antimicrobial properties of silver–polysaccharide coatings on porous fiber-reinforced composites for bone implants

Biostable fiber-reinforced composite (FRC) implants prepared from bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate resin reinforced with E-glass fibers have been successfully used in cranial reconstructions in 15 patients. Recently, porous FRC structures were suggested as potential implant materials. Compared with smooth surface, porous surface allows implant incorporation via bone ingrowth, but is also a subject to bacterial attachment. Non-cytotoxic silver–polysaccharide nanocomposite coatings may provide a way to decrease the risk of bacterial contamination of porous FRC structures. This study is focused on the in vitro characterization of the effect porosity on the antimicrobial efficiency of the coatings against Staphylococcus aureus and Pseudomonas aeruginosa by a series of microbiological tests (initial adhesion, antimicrobial efficacy, and biofilm formation). Characterization included confocal laser scanning microscopy and scanning electron microscopy. The effect of porosity on the initial attachment of S. aureus was pronounced, but in the case of P. aeruginosa the effect was negligible. There were no significant effects of the coatings on the initial bacterial attachment. In the antimicrobial efficacy test, the coatings were potent against both strains regardless of the sample morphology. In the biofilm tests, there were no clear effects either of morphology or of the coating. Further coating development is foreseen to achieve a longer-term antimicrobial effect to inhibiting bacterial implant colonization.     

The coming of age of agroforestry

The success of modern agricultural and forestry production can be largely attributed to monoculture systems using a few select species. In the drive for maximizing yield and profit, the age‐old tradition of using combined farming systems was essentially avoided and in some cases this has resulted in environmental problems such as land and water degradation and increased land clearing. During the last 30 years, however, the positive benefits of agroforestry to the producer and the environment have been increasingly recognized. Combining trees and crops in spatial or temporal arrangements has been shown to improve food and nutritional security and mitigate environmental degradation, offering a sustainable alternative to monoculture production. By providing supportive and complimentary roles with a flexible approach, agroforestry can offer specific social and environmental benefits across a range of landscapes and economies. More research and effort is needed to explore the full potential of agroforestry applications and to fuel awareness. As the plethora of benefits of agroforestry are realized, modern land‐use systems are evolving towards a more sustainable and holistic approach to land management. Copyright © 2007 Society of Chemical Industry