Channel Allocation with MIMO in Cognitive Radio Network

Wireless Personal Communications - The bulk volume and diverse data generated by Smart grid applications require use of Cognitive Radio (CR) technology for efficient handling. The CR technology...     

Chromophore-Free Sealing and Repair of Soft Tissues Using Mid-Infrared Light-Activated Biosealants

Poor strength, infection, leakage, long procedure times, and inflammation limit the efficacy of common tissue sealing devices in surgeries and trauma. Light-activated sealing is attractive for tissue sealing and repair, and can be facilitated by the generation of local heat following absorption of nonionizing laser energy by chromophores. Here, the inherent ability of biomaterials is exploited to absorb nonionizing, mid-infrared (midIR) light in order to engender rapid photothermal sealing and repair of soft tissue wounds. In this approach, the biomaterial simultaneously acts as a photothermal convertor as well as a biosealant, which dispenses the need for exogeneous light-absorbing nanoparticles or dyes. Biomechanical recovery, mathematical modeling, histopathology analyses, tissue strain mapping using digital imaging correlation, and visualization of the biosealant-tissue interface using hyperspectral imaging indicate superior performance of midIR sealing in live mice compared to conventional sutures and glue. The midIR-biosealant approach demonstrates rapid sealing of soft tissues, improves cosmesis, lowers potential for scarring, obviates safety concerns because of the nonionizing light used, and allows adoption of a wide diversity of biomaterials. Taken together, the studies demonstrate a novel advance both in biomaterials for surgical sealing along with the use of nonionizing midIR light, with high potential for clinical translation.     

A Bluetooth Based Sensor Network for Civil Infrastructure Health Monitoring

Communicating with sensors has long been limited either to wired connections or to proprietary wireless communication protocols. Using a ubiquitous and inexpensive wireless communication technology to create Sensor Area Networks (SANs) will accelerate the extensive deployment of sensor technology. Bluetooth, an emerging, worldwide standard for inexpensive, local wireless communication is a viable choice for SANs because of its inherent support for some of the important requirements – low power, small form factor, low cost and sufficient communication range. In this paper we outline an approach, centered on the Bluetooth technology, to support a sensor network composed of fixed wireless sensors for health monitoring of highways, bridges and other civil infrastructures. We present a topology formation scheme that not only takes into account the traffic generated by different sensors but also the associated link strengths, buffer capacities and energy availability. The algorithm makes no particular assumptions as to the placement of nodes, and not all nodes need to be in radio proximity of each other. The output is a tree shaped scatternet rooted at the sensor hub (data logger) that is balanced in terms of traffic carried on each of the links. We also analyze the scheduling, routing and healing aspects of the resulting sensor-net topology.     

Night and Day: Are Siblings as Different in Temperament as Parents Say They Are?

Twin studies suggest that parent ratings of temperament exaggerate differences between twins. The present study examined whether such contrast effects also operate for nontwin siblings. The activity level (AL) and shyness of 95 nontwin sibling pairs (ages 3 to 8 years) were assessed via parent ratings and objective measures (actigraph and observer ratings). Siblings showed no resemblance in either parent-rated AL or shyness; however, sibling resemblance for actigraph AL and observer-rated shyness was substantial. Thus, parents do contrast their nontwin siblings when rating these 2 temperament dimensions. Moreover, the importance of sibling differences in temperament to the sibling relationship and differential maternal treatment varied across the different measures of AL and shyness, suggesting that parent perceptions may play a role in these associations. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A benchmark on the calculation of kinetic parameters based on reactivity effect experiments in the CROCUS reactor

Measurements in the CROCUS reactor at EPFL, Lausanne, are reported for the critical water level and the inverse reactor period for several different sets of delayed supercritical conditions. The experimental configurations were also calculated by four different calculation methods. For each of the supercritical configurations, the absolute reactivity value has been determined in two different ways, viz.: (i) through direct comparison of the multiplication factor obtained employing a given calculation method with the corresponding value for the critical case (calculated reactivity: ρ_calc); (ii) by application of the inhour equation using the kinetic parameters obtained for the critical configuration and the measured inverse reactor period (measured reactivity: ρ_meas). The calculated multiplication factors for the reference critical configuration, as well as ρ_calc for the supercritical cases, are found to be in good agreement. However, the values of ρ_meas produced by two of the applied calculation methods differ appreciably from the corresponding ρ_calc values, clearly indicating deficiencies in the kinetic parameters obtained from these methods.     

Changes in Δ5- and Δ7-sterols during germination and seedling development ofCucurbita maximaduring germination and seedling development ofCucurbita maxima

While seeds ofCucurbita maxima contain both Δ⁵- and Δ⁷-sterols, the former, which have been described earlier, now have been found to disappear during germination. This suggests that a function exists for the Δ⁵-compounds only in the early part of the life cycle ofC. maxima, unlike most of the other higher plants studied. In contrast to the Δ⁵-sterols, the level of Δ⁷-sterols increased during germination as well as during seedling development and maturation. The period of transition between germination and seedling development appeared to be of special importance in terms of sterol changes. This period represented a surge of sterol biosynthesis with an ontogenetic shift in sterol composition from approximately equal amounts of 24α- and 24β-ethyl stereochemistry to a predominance of the former. The sterol composition of the mature plants included only about 5% of the 24β-ethylsterols. The configurational relationships were demonstrated by high resolution¹H-NMR. The sterols of the mature plants were: 25(27)-dehydrochondrillasterol, 24β-ethyl-25(27)-dehydrolathosterol, avenasterol, spinasterol, 22-dihydrospinasterol and 24ξ-methyllathosterol. Based on the changes which occurred in the relative amounts of the Δ⁷-sterols, it did not appear that the Δ⁵-components were being converted to their Δ⁷-analogs. A portion of this work was presented at the meeting of the American Oil Chemists' Society in May, 1985 in Philadelphia.     

Fatigue crack initiation and propagation of binder-treated powder metallurgy steels

Many of the targeted applications for powder-metallurgy materials, particularly in the automotive industry, undergo cyclic loading. It is, therefore, essential to examine the fatigue mechanisms in these materials. The mechanisms of fatigue-crack initiation and propagation in ferrous powder-metallurgy components have been investigated. The fatigue mechanisms are controlled primarily by the inherent porosity present in these materials. Since most, if not all, fatigue cracks initiate and propagate at the specimen surface, surface replication was used to determine the role of surface porosity in relation to fatigue behavior. Surface replication provides detailed information on both initiation sites and on the propagation path of fatigue cracks. The effect of microstructural features such as pore size and pore shape, as well as the heterogeneous microstructure on crack deflection, was examined and is discussed. Fracture surfaces were examined to elucidate a mechanistic understanding of fatigue processes in these materials.     

Microstructure-based modeling of the deformation behavior of particle reinforced metal matrix composites

A review is provided of the use of analytical models and two dimensional (2D) and three dimensional (3D) microstructure based FEM models to accurately predict the properties of particle reinforced composite materials. It is shown that analytical models do not account for the microstructural factors that influence the mechanical behavior of the material. 2D models do capture the anisotropy in deformation behavior induced by anisotropy in particle orientation. The experimentally-observed dependence of Young's modulus and tensile strength is confirmed by the 2D microstructure-based numerical model. However, because of the 2D stress state, a realistic comparison to actual experimental values is not possible. A serial sectioning process can be used to reproduce and visualize the 3D microstructure of particle reinforced metal matrix composites. The 3D microstructure-based FEM accurately represents the alignment, aspect ratio, and distribution of the particles. Comparison with single particle and multiparticle models of simple shape (spherical and ellipsoidal) shows that the 3D microstructure-based approach is more accurate in simulating and understanding material behavior.     

Prognostic evaluation of early indicators in fulminant hepatic failure by multivariate analysis

Results of eight multicenter, randomized, placebo-controlled, double-blind, parallel-group studies were pooled to assess the efficacy of the angiotensin II-receptor blocker irbesartan over the dose range of 1 to 900 mg. A total of 2955 adults with a seated diastolic blood pressure of 95 to 110 mm Hg were randomized to treatment with oral irbesartan once daily or placebo for 6 to 8 weeks. Office blood pressure was measured at trough (24+/-3 hours after the last dose) and peak (3+/-1 hours after the last dose) by mercury sphygmomanometry. Demographic characteristics (mean blood pressure; 151/101 mm Hg; mean age, 54 years; 63% male; and 82% white) were similar across all dose groups. After the groups were pooled, antihypertensive efficacy was assessed by therapeutic response (trough seated diastolic blood pressure <90 mm Hg or a reduction from baseline of > or = 10 mm Hg) and by modeling of the maximum reductions in trough and peak seated diastolic and systolic blood pressure. Antihypertensive effects increased with increasing doses and reached a plateau at > or = 300 mg. Irbesartan 150 mg provided placebo-subtracted reductions in trough seated systolic and diastolic blood pressure of approximately 8 and approximately 5 mm Hg, respectively, with 56% of patients displaying a favorable response. In conclusion, irbesartan provides clinically significant blood pressure lowering, with a clear relationship between (log) dose and antihypertensive effect.