Machine assignment and part-families formation using group technology

The conventional way of solving the group technology (GT) problem is to start from an assignment of parts to machines and try to find a partitioning of machine cells and part families. The similarity between parts is measured based on commonality of the machines assigned to them. However, parts are assigned to machines based on their operation requirements and the operation capabilities of machines. Similarity between parts should be based on their required operations. In this paper, the authors attempt to solve or facilitate solving the GT problem at the assignment level. An algorithm for assigning parts to machines is provided which utilizes the types of operations required by parts and applies GT principles in producing the assignment. This leads to better partitioning of machine cells and part-families. Furthermore, operation sequences required by parts in determining the similarity between parts have been considered. An algorithm to form part-families based on the operation sequence similarity coefficient has been developed. The resulting families are then used by the assignment algorithm to produce machine assignments to part-families. The use of the algorithm is demonstrated by examples.     

Depollution of atmospheric emissions of wood pyrolysis furnaces

The wood carbonization in Tunisia consists essentially of traditional activity using charcoaling stacks and pits characterized by high atmospheric pollution and poor energy conversion. Indeed, 70% of the initial mass of anhydrous wood are found in the vapor as aerosols, polluting and toxic gases and complex condensable organic compounds that can cause a substantial pollution of air, ground and water. Several processes of treatment and energy valorization of such effluents were proposed, but the incineration remains at present the most promising technique of depollution. The results show that the incineration, at about 1000°C, of wood carbonization smokes allows the destruction of 99% of the mass of pollutants except CO₂ and the reduction of polluting gas emission. The possible valorization of the smoke’s energy in the exit of the incinerator enhances the thermal efficiency of the process.     

A furostanol saponin from fruits of Balanites aegyptiaca

A new furostanol saponin was isolated from the mesocarp of Balanites aegyptiaca fruits and identified as 26-O-beta-D-glucopyranosyl-(25R)-furost-5-ene-3,22,26-triol 3-O-[[alpha-L-rhamnopyranosyl-(1-->2)]-[beta-D-xylopyranosyl-(1-->2)]-be ta- D-xylopyranosyl-(1-->2)]-beta-D-xylopyranoside (balanitesin).     

Influence of annealing on properties and structure of alumina

Alumina bodies were prepared from pure alumina powder (98.9% Al₂O₃ consisting of 82% > 53m). The powder was compacted by hot-pressing at 1200° C, Compacted bodies were annealed at 1300, 1400 and 1500° C. Annealing continued at each maximum temperature for 25, 50 and 100 h. Strong bodies were obtained with maximum bulk density of 2.32 g cm^–3 and minimum apparent porosity of 30.21%. The change in sintering parameters with annealing was correlated with developed structure.     

Differential Effects of STCH and Stress-Inducible Hsp70 on the Stability and Maturation of NKCC2

Mutations in the Na-K-2Cl co-transporter NKCC2 lead to type I Bartter syndrome, a life-threatening kidney disease. We previously showed that export from the ER constitutes the limiting step in NKCC2 maturation and cell surface expression. Yet, the molecular mechanisms involved in this process remain obscure. Here, we report the identification of chaperone stress 70 protein (STCH) and the stress-inducible heat shock protein 70 (Hsp70), as two novel binding partners of the ER-resident form of NKCC2. STCH knock-down increased total NKCC2 expression whereas Hsp70 knock-down or its inhibition by YM-01 had the opposite effect. Accordingly, overexpressing of STCH and Hsp70 exerted opposite actions on total protein abundance of NKCC2 and its folding mutants. Cycloheximide chase assay showed that in cells over-expressing STCH, NKCC2 stability and maturation are heavily impaired. In contrast to STCH, Hsp70 co-expression increased NKCC2 maturation. Interestingly, treatment by protein degradation inhibitors revealed that in addition to the proteasome, the ER associated degradation (ERAD) of NKCC2 mediated by STCH, involves also the ER-to-lysosome-associated degradation pathway. In summary, our data are consistent with STCH and Hsp70 having differential and antagonistic effects with regard to NKCC2 biogenesis. These findings may have an impact on our understanding and potential treatment of diseases related to aberrant NKCC2 trafficking and expression.     

Creation of reactive centers on cotton. IV. Reaction of acrylamidomethylated cotton with some sulfur compounds

The addition of mercaptoethanol and hydrogen sulfide to the pendent double bonds of acrylamidomethylated cotton (AMC) has been investigated. The interaction of acrylonitrile with the modified celluloses so obtained (substrate I and II) and with AMC treated with ammonium hydroxide (substrate III) in the presence of Ce(IV) is studied. Substrate I shows higher initial grafting yields. than AMC; the opposite holds true for the maximum graft yields. The graft yields obtained with substrate II are lower than those of AMC. All modified cottons studied are less amenable to grafting compared with the unmodified cotton. The graft yields of AMC and substrate III are comparable due to the fact that both substrates are crosslinked. Probable reasons for the inferior reactivity of substrates I and II are also given.     

RF MEMS continuous reversible variable inductor based on a microfluidic network

In this work, RF MEMS continuous reversible variable inductor has been fabricated by using microelectronic technology and lamination process. We review, evaluate and compare this variable inductor with other work. The proposed inductor is a dual circular coil and has an inductance of few nH. The fundamental idea is to place a liquid droplet between the metal turns of a coil in order to modify the capacitive/resistive coupling between metal tracks and hence to change the stored magnetic energy. The SU-8 resin was used to realize the microfluidic channels and Au as metallic tracks. To prove the reversibility of the inductor, two cases were studied: filling and emptying of channels. The tuning range of the inductance is approximately 107 % at 1.6 GHz, making these devices very suitable as building blocks in many RF applications.     

New results on PWARX model identification based on clustering approach

This paper deals with the problem of piecewise auto regressive systems with exogenous input(PWARX) model identification based on clustering solution. This problem involves both the estimation of the parameters of the affine sub-models and the hyper planes defining the partitions of the state-input regression. The existing identification methods present three main drawbacks which limit its effectiveness. First, most of them may converge to local minima in the case of poor initializations because they are based on the optimization using nonlinear criteria. Second, they use simple and ineffective techniques to remove outliers. Third, most of them assume that the number of sub-models is known a priori. To overcome these drawbacks, we suggest the use of the density-based spatial clustering of applications with noise(DBSCAN) algorithm. The results presented in this paper illustrate the performance of our methods in comparison with the existing approach. An application of the developed approach to an olive oil esterification reactor is also proposed in order to validate the simulation results.     

Engineering proteins, subcloning and hyperexpressing oxidoreductase genes

A very efficient system for subcloning and studying proteinsequences, combining previously established elements for hyperexpression,replication and screening, was used to hyperproduce and characterizeseven different products. It expedited the cloning of genes,in a multipurpose recombinant DNA construct, for all the requirementsto study and engineer proteins with a strain of Escherichiacoli. Genes encoding six heme proteins and a flavoprotein havebeen subcloned and expressed to 13–30% of the total cellprotein, greatly facilitating purification and analyses. Threeof the heme proteins and the flavoprotein incorporated prostheticgroups in E.coli, and exhibited the expected activities. Fourof the enzymes have been purified to homogeneity and two ofthese crystallized for X-ray diffraction analysis. A rapid muta-genesisprotocol, based on polymerase chain reactions, was successfullyapplied to clone derivatives of one of these enzymes, cytochromec peroxidase. Thus, this system fulfills all criteria for engineeringproteins in an efficient and concerted manner.     

Biochemical and physiological studies of certain ticks (Ixodoidea): Isolation and partial identification of a new fatty acid in eggs ofDermacentor andersoni Stiles (Ixodidae)

Gas liquid chromatographic analysis of the fatty acid methyl esters from eggs ofDermacentor andersoni Stiles (Ixodidae) revealed the presence of significant quantities (15% total fatty acids) of an unidentified component with a retention time between C_18∶3−C_22∶0 fatty acids. Smaller amounts of the unidentified component (ca. 5% total fatty acid) also were detected in host rabbit serum. Purified, the unidentified component's methyl ester collected from the tick eggs by preparative gas liquid chromatography was partially identified and characterized by chemical and spectroscopic analyses. The evidence suggests that the unidentified component is a methyl branched C₁₅ tricarboxylic acid containing two vicinal carboxylic acid groups. Biosynthesis of the unidentified component by the tick is under investigation.