基坑开挖对建筑物基础安全性的影响分析

基坑开挖对于建筑工程项目建设非常重要,工程建设中对基坑周围建筑物基础稳定性及安全性产生影响.为提高建筑建设质量及保障人民群众生命财产安全,对实际基坑开挖作业做了调查,进行了深入研究,尤其对建筑物基础安全性产生的影响进行了分析,以期为施工人员进行施工作业提供可靠依据.     

One-Dimensional Deep Convolutional Neural Network for Mineral Classification from Raman Spectroscopy

Neural Processing Letters - Raman spectroscopy is often used for the composition determination and rapid classification of materials because it can reflect the molecular information of materials....     

Fractional order battery modelling methodologies for electric vehicle applications: Recent advances and perspectives

Science China Technological Sciences - Accurate modelling of lithium ion batteries is crucial for battery management in electric vehicles. Recent studies have revealed the fractional order nature...     

济阳坳陷下古生界潜山油气藏特征及成藏模式

济阳坳陷下古生界潜山具有多样性、复杂性的特点，潜山差异性的形成演化、油气成藏主控因素和控藏模式不明确，严重制约了该区潜山油气勘探。在潜山分类的基础上，综合利用系统恢复、分类对比和典型解剖等方法，揭示了济阳坳陷下古生界不同类型潜山的形成演化过程和油气成藏主控因素差异性，分类建立了油气成藏模式。研究表明，济阳坳陷下古生界主要发育高位新盖侵蚀残丘潜山、中位古盖拉张断块潜山、中位新古盖拉张剪切断块潜山、中位中古盖挤压拉张断块潜山和低位古盖拉张滑脱断块潜山5种潜山类型。不同类型潜山的形成演化和油气成藏各具特色，其中，高位新盖侵蚀残丘潜山的发育受隆升、侵蚀作用控制，油气成藏主要受控于油源和盖层条件，表现为"单向供烃、砂体-不整合岩溶体联合输导、残丘控藏"的成藏模式；中位古盖拉张断块潜山的发育受掀斜、断裂作用控制，油气成藏主要受控于储集条件，表现为"单向供烃、顺向断层输导、反向断层控藏"的成藏模式；中位新古盖拉张剪切断块潜山的发育受反转、翘倾和走滑切割作用控制，油气成藏主要受控于输导条件，表现为"多源供烃、断溶体立体输导、断裂控藏"的成藏模式；中位中古盖挤压拉张断块潜山的形成受强烈挤压、拉张滑脱作用控制，油气成藏主要受控于储集条件，表现为"多源供烃、断缝体输导、断褶控藏"的成藏模式；低位古盖拉张滑脱断块潜山的形成受强烈拉张滑脱作用控制，油气成藏主要受控于输导条件，表现为"顶部供烃、断缝体输导、断裂控藏"的成藏模式。     

快速切换(SMED)在空调制造厂的研究与应用

在目前市场需求呈现规模扩张和品类个性化的冲击下,制造业面对的竞争压力愈发明显.且随着新时代自动化、信息化、大数据智能化等先进制造特征的兴起,更加促使制造业向转型升级不断进军.以空调制造业的控制器版块为例,从制约此单位效率的SMT车间切换浪费为切入点,在SMED快速换模的理念基础上,通过使用IE分析工具对切换流程进行研究,提炼出一套多模组固定料站切换模型,同时结合自动化、信息化等智能制造技术引进,完成SMT车间人力投入减少35人,日均产出点数提升18.29％,设备运行率提升15.46％,综合成本降低110.6万元/年的效益.成功推广应用至电子物料拣选版块,并开发信息化看板,夯实应用效益,再次证实"多模组固定料站"快速切换模型是典型小、多、高生产模式,具有可行性的解决方案.     

山东某难选贫磁铁矿石工艺矿物学研究

山东某难选贫磁铁矿石一直处于待开发状态。为了给矿石资源的开发利用提供依据，进行了系统的工艺矿物学研究。结果表明：①矿石中的主要有用矿物为磁铁矿，其次为假象赤铁矿和赤铁矿，含量分别为13.93%、5.65%和3.31%，褐铁矿分布较少为1.01%；主要脉石矿物为石英，其次为黑云母、碳酸盐类矿物和辉石，含量分别为39.12%、11.23%、7.78%和6.57%。②矿石主要构造为块状构造、层纹状构造，少量角砾状构造；主要结构有条带状结构、粒状结构，其次为脉状结构、交织结构，少量交代残余结构、辉绿结构、浸染状结构、斑状结构和纤维状结构。③矿石中有用铁矿物结晶粒度微细，主要分布在-0.04 mm粒级，其中磁铁矿（含假象赤铁矿）和赤、褐铁矿分布率分别为63.29%和72.50%，而-0.01 mm粒级分布率则占21.13%和29.16%，因此，欲使铁矿物与脉石达到较好解离，矿石必须细磨。     

An effectiveness analysis of altmetrics indices for different levels of artificial intelligence publications

Scientometrics - Altmetrics indices are increasingly applied to measure scholarly influence in recent years because they can reflect the influence of research outputs more timely comparing with...     

Synergistic effects of modified TiO2/multifunctionalized graphene oxide nanosheets as functional hybrid nanofiller in enhancing the interface compatibility of PLA/starch nanocomposites

The aim of this study is to investigate the synergistic effects of modified TiO₂/multifunctionalized graphene oxide nanosheets at different ratios on the interface compatibility between starch and poly(lactic acid) (PLA). To this end, silanylated nano-TiO₂ (MTiO₂, 1 and 2%) and alkylated maleic anhydride grafted graphene oxide (f-GO, 0.1, 0.2, and 0.4%) at different combinations are blended with the PLA-starch composites using solution blending technique. Then, the synergistic effects of MTiO₂ and f-GO on PLA/starch matrix are investigated in terms of the morphology, crystallinity, structural characterization, thermal stability, dynamic mechanical, and antiaging properties, and the related mechanisms. The Raman and Fourier transform infrared spectroscopy spectra verify the successful synthesis of the two modified nanofillers (f-GO and MTiO₂) and the formation of strong hydrogen bond within the PLA-starch nanocomposites. Due to the strong interfacial interaction and the synergistic effect from the combination of 1% MTiO₂ and 0.2% f-GO, obvious improvement was observed in PLA-starch versus other nanocomposites in terms of morphology, thermal stability, surface hydrophobicity, storage modulus, ultraviolet-shielding capacity, and aging-resistance. Furthermore, differential scanning calorimeter (DSC), isothermal crystallization kinetic, and X-ray diffraction analysis demonstrate that f-GO and the M-TiO₂ significantly synergize in enhancing the crystallization rate and crystallinity of PLA/starch matrix. These results provide novel insights for constructing high-performance nanocomposites and facilitate their applications in food packaging.