Combined application of electrolysed water and ultrasound to improve the sanitation of knives in the meat industry

This study investigated the effect of the combination of basic electrolysed water (BEW) and slightly acid electrolysed water (SAEW) with ultrasound (US) for cleaning and sanitation of the knives used in slaughtering processes. The knives were sonicated in a US bath using two modes of operation (normal and sweep) in two steps: (i) 5 min with BEW and (ii) 10 min with SAEW at 35 °C. The microbiological counts and the possible changes in the physical structure of the knives were evaluated. The association BEW + SAEW + US, in the sweep mode, provided lower mesophilic, enterobacterial, Staphylococcus aureus and yeast counts when compared to the values recommended by the international legislation. In addition, these conditions removed all organic residues from the knife blades and promoted the highest migration rate of the residues to the US water bath (12.35 mg/L·min), without modifications in the knife blades. Thus, cleaning and sanitation of knives was feasible with the association of BEW + SAEW + US, which could be a useful alternative for the meat industry.     

Removal of oligosaccharides in soybean flour and nutritional effects in rats

The objectives of this work were to establish a safe and economically viable process for the removal of raffinose oligosaccharides (RO) from soy flour and compare the effects of RO elimination from diets with regard to nutritional parameters by testing in Wistar rats. Debaryomyces hansenii UFV-1 was cultivated in suspension of defatted soy flour (1:10 w/v). An increase in α-galactosidase activity was observed in the medium, with a consequent decrease in the RO concentration. A total reduction of RO was achieved at 36 h of incubation. The diet containing soy flour free of RO presented higher digestibility, 91.28%, in relation to the diet containing soy flour with RO, 87.14%. However, the removal of the oligosaccharides from the diet did not promote a significant improvement in the values of weight gain, and other nutritional parameters tested on rats, during the experimental period of 14 days.     

The Brazilian experience of rural electrification in the Amazon with decentralized generation - The need to change the paradigm from electrification to development

There are at least 607 thousand households in the Brazilian Amazon that need to be attended with some form of regular electricity service. These households are not attended by the electricity sector through its electricity distribution companies and most of them have some form of precarious decentralized electricity generation that is not registered or regulated in the institutional framework. Diverse initiatives were taken by Brazilian government to attend these household through alternatives that relied on locally available renewable energy. This paper accesses this initiatives of rural electrification in the Brazilian Amazon. First an overview of the problems of rural electricity are discussed and its specificities in the Brazilian Amazon. Then the Brazilian institutional framework that organizes the decentralized electricity generation is described with its various limitations. The diverse initiatives undertaken to attend the rural communities in the Amazon since the 1990s are described, as well as how these initiatives are linked to the policies for rural electrification. The results shows that it can be inferred that sole market mechanisms are not sufficient to guarantee economic sustainability of these projects. This can be one of the reasons why traditional electricity distribution companies showed the lack of interest in promoting rural electrification with other means than grid extension. The most successful projects had financed efforts to integrate the generation of electricity into local development initiatives in order to guarantee sustainability and used substantial part of funding for local mobilization and organization. It needs a paradigm chance by treating these initiatives as local development initiatives and promoting alternative ways for its implementation through partnership between local new actors in the electricity sector and government and implementing policy on a local municipal level.     

Organic–Inorganic Hybrid Films Based on Hydroxylated Soybean Oils

Hybrid organic–inorganic films were prepared using four different hydroxylated soybean oils (HSO) or epoxidized soybean oil as organic precursor and tetraethyl orthosilicate (TEOS) as inorganic precursor in a mass ratio of HSO:TEOS of 90:10. The films were macroscopically homogeneous and were characterized by swelling and extraction in solvent, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) including energy dispersive spectroscopy (EDX), adhesion and hardness. Their properties varied as a function of the number of OH groups present in the HSO. The best hybrid system was HSOF198/TEOS, with an OH value of 198 mg of KOH/g, which presents lower swelling coefficient, very good adhesion on aluminium surface and good hardness.     

Spin injection in n-type resonant tunneling diodes

We have studied the polarized resolved photoluminescence of n-type GaAs/AlAs/GaAlAs resonant tunneling diodes under magnetic field parallel to the tunnel current. Under resonant tunneling conditions, we have observed two emission lines attributed to neutral (X) and negatively charged excitons (X⁻). We have observed a voltage-controlled circular polarization degree from the quantum well emission for both lines, with values up to −88% at 15 T at low voltages which are ascribed to an efficient spin injection from the 2D gases formed at the accumulation layers.     

Epoxidation of soybean oil by the methyltrioxorhenium-CH2Cl2/H2O2 catalytic biphasic system

We studied the methyltrioxorhenium (MTO)-CH₂Cl₂/H₂O₂ biphasic system for epoxidizing soybean oil. The reactions were optimized (reactant ratio, time, and temperature), which resulted in a better performance (higher conversion and selectivity) than those described in the literature. Total doublebond conversion and 95% selectivity were obtained in 2 h at room temperature. Furthermore, it was possible to reach desired epoxidation degrees by changing the oxidant and MTO amounts. The rhenium-epoxidized soybean oil remained stable in the absence of stabilizers for up to 30 d when stored at mild conditions.     

Evaluation of the Fractal Properties of Cluster?Cluster Aggregates

While the fractal dimension of cluster-cluster aggregates, D_f , appears to be a well-established property, the fractal prefactor, k_g (also known as structural coefficient), continues to exhibit a large range of possible values. In the present paper, an attempt is made to clarify this issue which leads to conclusive results concerning the value to adopt for the fractal prefactor of simulated aggregates. Starting from a large population of "free" numerically simulated aggregates (i.e., where no restrictions to aggregate formation were imposed) the fractal properties obtained were estimated both using morphological concepts as well as light scattering theories. Furthermore, studies for aggregates having predefined morphological k_g values (namely, k_g > 2 and ca. 1) were also performed in order to check the viability of these values. The results obtained for the three different populations of aggregates considered were used to infer, through a best-fit analysis, the fractal properties. Our best estimates are k_g      

Advances in Growth Factor Delivery for Bone Tissue Engineering

Shortcomings related to the treatment of bone diseases and consequent tissue regeneration such as transplants have been addressed to some extent by tissue engineering and regenerative medicine. Tissue engineering has promoted structures that can simulate the extracellular matrix and are capable of guiding natural bone repair using signaling molecules to promote osteoinduction and angiogenesis essential in the formation of new bone tissues. Although recent studies on developing novel growth factor delivery systems for bone repair have attracted great attention, taking into account the complexity of the extracellular matrix, scaffolding and growth factors should not be explored independently. Consequently, systems that combine both concepts have great potential to promote the effectiveness of bone regeneration methods. In this review, recent developments in bone regeneration that simultaneously consider scaffolding and growth factors are covered in detail. The main emphasis in this overview is on delivery strategies that employ polymer-based scaffolds for spatiotemporal-controlled delivery of both single and multiple growth factors in bone-regeneration approaches. From clinical applications to creating alternative structural materials, bone tissue engineering has been advancing constantly, and it is relevant to regularly update related topics.