Cognitive and metabolic workload assessment techniques: A review in automotive manufacturing context

Ergonomics assessment in the automotive industry has, to date, focused mainly on physical ergonomics, for example, manual handling and posture. However, workload and, in particular, metabolic and cognitive workload, contributes to worker efficiency but has not received sufficient attention to yield practical guidance for industry. Successful workload assessment requires in-depth understanding of the context in which it will be conducted and of the various assessment techniques which will be applied, with consideration given to factors such as feasibility, resources, and skill of the assessor. These requirements are met with challenges within large and complex organizations and are often dealt with in a piecemeal and isolated matter (i.e., reactive workload assessment). The present paper explores these challenges within the automotive manufacturing industry and aims to develop a decision matrix to guide effective selection of workload assessment techniques focused on metabolic and cognitive demands. It also presents the requirements for time, equipment, and knowledge to implement these techniques as part of a participatory ergonomics approach. Early findings suggest that most assessment techniques reviewed require further development, for example, to establish the acceptance criteria for the specific workload scenario. However, five methods (Garg, Borg RPE, IPAQ, SWAT, and NASA-TLX) are ready to use in certain applications. Ultimately, the findings suggest that it is possible to implement a participatory workload evaluation program within large and complex manufacturing plants.     

Direct writing of textured ceramics using anisotropic nozzles

Direct writing is a unique means to align anisotropic particles for the fabrication of textured ceramics by templated grain growth (TGG). We show that alignment of tabular barium titanate (BT) template particles (20–40 μm width and 0.5–2 μm thickness) in a PIN-PMN-PT matrix powder (d₅₀ = 280 nm) is significantly improved during direct writing using anisotropic nozzles at high printing rates. The particle orientation distribution in as-printed filaments, and the texture orientation distribution in sintered ceramic filaments are shown to directly correlate with COMSOL Multiphysics-predicted torque distributions for direct writing with aspect ratio 2, 3 and 5 oval nozzles. Electromechanical strain properties of the textured piezoelectric ceramics significantly improved relative to random ceramics when printed with anisotropic nozzles. Simulations of aspect ratio 20 nozzles and nozzles with interior baffles demonstrate significantly increased torque and near elimination of constant shear stress cores (i.e. plug flow).     

Co-optimization of color and mechanical properties by volumetric voxel control

Structural and Multidisciplinary Optimization - Controlling the composition of individual voxels allows for a co-optimization of 3D-printed part properties such as color and mechanical ones. As a...     

A Step toward Molecular Evolution of RNA: Ribose Binds to Prebiotic Fatty Acid Membranes,and Nucleosides Bind Better than Individual Bases Do

A major challenge in understanding how biological cells arose on the early Earth is explaining how RNA and membranes originally colocalized. We propose that the building blocks of RNA (nucleobases and ribose) bound to self-assembled prebiotic membranes. We have previously demonstrated that the bases bind to membranes composed of a prebiotic fatty acid, but evidence for the binding of sugars has remained a technical challenge. Here, we used pulsed-field gradient NMR spectroscopy to demonstrate that ribose and other sugars bind to membranes of decanoic acid. Moreover, the binding of some bases is strongly enhanced when they are linked to ribose to form a nucleoside or – with the addition of phosphate – a nucleotide. This enhanced binding could have played a role in the molecular evolution leading to the production of RNA.     

Electrospun crosslinked poly(acrylic acid) fiber constructs: towards a synthetic model of the cortical layer of nerve

In an attempt to mimic properties of the polyanionic nanofibrous cortical layer (ectoplasm) of nerve, tube‐shaped poly(acrylic acid) (PAA) nanofiber constructs were prepared via electrospinning. The influence of processing parameters on the morphology of the electrospun PAA nanofibers was systematically investigated. Smooth and uniform PAA nanofibers with average fiber diameter of 820 nm were produced at a concentration of 4 wt% with a flow rate of 0.8 mL h^?1 when a high voltage of 15 kV was applied. Water‐stable PAA nanofibers were obtained by thermally crosslinking PAA with ethylene glycol. The resulting tubes were neutralized to the sodium polyacrylate form and were shown to undergo reversible and abrupt length changes upon titration with CaCl₂ followed by titration with sodium citrate. The sharpness of the length transition was found to be highly dependent upon the bathing NaCl concentration and the operation temperature. It is suggested that electrospun PAA may be a promising candidate as a key element of an abiotic macromolecular mimic of selected properties of axons. © 2014 Society of Chemical Industry     

Processing and electromechanical properties of high-coercive field ZnO-doped PIN-PZN-PT ceramics

This study explores sintering and piezoelectricity of ZnO-doped perovskite Pb(In_1/2Nb_1/2)O₃-Pb(Zn_1/3Nb_2/3)O₃-PbTiO₃ (PIN-PZN-PT) ceramics. The enhanced densification of ZnO-doped PIN-PZN-PT is attributed to the formation of oxygen vacancies by the incorporation of Zn²⁺ into the perovskite B-site and increased rate of bulk diffusion relative to undoped PIN-PZN-PT. Incorporation of Zn²⁺ into the perovskite lattice increased the tetragonal character of PIN-PZN-PT as demonstrated by tetragonal peak splitting and increased Curie temperature. Sintering in flowing oxygen reduced the solubility of Zn²⁺ in the perovskite lattice and resulted in rhombohedral PIN-PZN-PT. Sintering in oxygen prevented secondary phase formation which resulted in a high-piezoelectric coefficient (d₃₃ – 550 pC/N), high-coercive field (E_c – 13 kV/cm), and high-rhombohedral to tetragonal phase transition temperature (T_r-t – 165°C). We conclude that ZnO-doped PIN-PZN-PT ceramics are excellent candidates for high-power transducer applications.     

Towards Efficient Nonenzymatic DNA Ligation: Comparing Key Parameters for Maximizing Ligation Rates and Yields with Carbodiimide Activation**

Chemical ligation is an important tool for the generation of synthetic DNA structures, which are used for a wide range of applications. Surprisingly, reported chemical ligation yields can range from 30 to 95 % for the same chemical activating agent and comparable DNA structures. We report a systematic study of DNA ligation by using a well-defined bimolecular test system and a water-soluble carbodiimide (EDC) as a phosphate-activating agent. Our results emphasize the interplay between template-substrate complex stability and the rates of the chemical steps of ligation, with 3′ phosphate substrates providing yields near 100 % after 24 hours for particularly favorable reaction conditions. Ligation rates are also shown to be sensitive to the identity of the base pairs flanking a nick site, with as much as threefold variation. Finally, the observation that DNA substrates are modified by EDC at rates that can be comparable with ligation rates emphasizes the importance of considering side reactions when designing protocols to maximize ligation yields.     

Structural Consequences of the 1,2,3-Triazole as an Amide Bioisostere in Analogues of the Cystic Fibrosis Drugs VX-809 and VX-770

Although the 1,2,3-triazole is a commonly used amide bioisostere in medicinal chemistry, the structural implications of this replacement have not been fully studied. Employing X-ray crystallography and computational studies, we report the spatial and electronic consequences of replacing an amide with the triazole in analogues of cystic fibrosis drugs in the VX-770 and VX-809 series. Crystallographic analyses quantify subtle differences in the relative positions and conformational preferences of the R¹ and R² substituents attached to the amide and triazole bioisosteres. Computational studies derived from the X-ray data highlight the improved hydrogen bonding donor and acceptor capabilities of the amide in comparison to the triazole. This analysis of the spatial and electronic differences between the amide and 1,2,3-triazole will inform medicinal chemists as they consider using the triazole as an amide bioisostere.     

Interdependence of Escherichia coli formate dehydrogenase and hydrogen-producing hydrogenases during mixed carbon sources fermentation at different pHs

The impact of the four membrane-bound [NiFe]-hydrogenases (Hyd) of Escherichia coli on total H₂-oxidizing activity during fermentation of a mixture of glucose, glycerol and formate at different pHs was examined. It was shown that Hyd-2 had a major contribution to total Hyd activity at pH 7.5 in early-stationary phase (24 h) cells, while the main contribution was made by Hyd-3 in late-stationary phase (72 h). Hyd-4-dependent Hyd activity could be demonstrated at pH 6.5 in cells lacking Hyd-1, Hyd-2 and Hyd-3. at pH 7.5 Hyd-4-dependent formate dehydrogenase (FDH-H) activity was demonstrated. Growth properties and fermentation end product patterns during 72 h demonstrated that the cells retained viability deep into stationary phase. Our findings emphasize the importance of formate in modulating H₂ metabolism, presumably by contributing to maintain redox, pH and pmf balance. This is important for regulating and enhancing H₂ production when a mixture of carbon sources is applied.