Adaptive fuzzy control for nontriangular form systems with time-varying full-state constraints

This article investigates an adaptive fuzzy tracking control problem for a class of nontriangular form systems with asymmetric time-varying full state constraints. Unknown functions are approximated by the fuzzy logic systems. A domination approach is employed to tackle the nontriangular form structure. Time-varying asymmetric barrier Lyapunov functions (ABLFs) are adopted to ensure full-state constraints satisfaction. Based on the backstepping technique and time-varying ABLFs, an adaptive controller is proposed and guarantees that all the signals in the closed-loop system are ultimately bounded and the time-varying full state constraints are met. Simulation examples are presented to further demonstrate the effectiveness of the proposed approach.     

控制爆破切槽放顶处理空区技术探讨

文中筒要讨论了国内外黄金矿山采空区处理的几种方法。在对金风公司采空区综合评价与应力测试基础上．提出了控制爆破切槽放顶处理采空区的新技术，并详细介绍了新技术要点及实施细节。应用实践表明，该技术简便易行、经济安全、具有创新性。     

EDT机床监控系统的研究开发

介绍可编程控制器FX2N－80MR在EDT机床逻辑控制系统中的应用，详细介绍了EDT机床监控系统的构成，功能及其实现方法。     

Nd：MgO：LiNbO3晶体的荧光光谱及其双晶体腔内互倍频实验

采用激光感生荧光技术测量了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３晶体的偏振荧光光谱，简要地说明了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３双晶体腔内互倍频的基本原理，并在实验中用染料激光作泵浦源实现了其双晶体腔内互倍频运转；得到５４３ｎｍ横模倍频绿光单端输出约ＹＭＷ，腔前泵浦阈值约３８ＭＷ，总转换效率约为１．３％。     

试制STM-R80钻探用无缝钢管

采用42MnMo7、41MnV5钢锻坯,经热轧穿孔、冷拔加工,试制出STM-R80地质钻探管。该地质管经检验和使用,质量符合要求。介绍了钢的化学成分、试制的主要工艺过程及其参数。     

一种可用于可调谐环行Ti：Al_2O_3激光器的宽带单向器

本文介绍一种宽带单向器的原理及设计。选用ＴＧＧ作磁旋光介质，旋光石英晶片作补偿片，所设计的色散补偿型宽带单向器预计可在７００～１０００ｎｍ波长范围内实现环行激光腔中的单向行波运行；将其应用在可调谐环行Ｔｉ：Ａｌ２Ｏ３激光器中，获得了良好的实验结果。     

工业园区典型河道生态修复方案

研究首先对河道现场、多参数水质和底质性状进行调查与检测,结果显示:该河属地表劣V类水体,水质主要超标因子为NH3-N和TP;底泥属于中度有机质污染,且铜、锌、砷等多个重金属指标严重超标.随后分析了典型工业园区河道的特征,如渠化、水环境容量低、水动力不足和水生态系统单一等.最后因地制宜提出护坡的生态化改造、生态清淤、曝氧增氧、截污工程和水生态系统构建等河道生态修复技术方案.     

基于可变撬棒电阻的双馈风机低电压穿越优化控制方法

电网故障时,DFIG并网点电压的跌落深度影响着机组的暂态特性,进而决定着机组应采用的低电压穿越策略(LVRT).此外,LVRT性能在一定程度上依赖于控制参数的选取,据此提出由电压跌落程度匹配低电压穿越策略的方案.首先根据故障距离对DFIG并网点电压进行分类并形成相应的LVRT优化策略;然后用粒子群算法优化控制系统参数后形成参数表,故障瞬间通过判断故障距离即可匹配合适的LVRT方案和最优控制参数;最后在PSCAD/EMTDC上建模仿真,结果表明所提方案有效提高了DFIG应对故障的灵活性,减小了故障对机组的不良影响,降低了无功损耗,总体上LVRT效果更佳,更具有实际意义.     

Low Dielectric Polyimide/Fluorinated Ethylene Propylene (PI/FEP) Nanocomposite Film for High-Frequency Flexible Circuit Board Application

The low dielectric polymer films have drawn great attention to the application as the dielectric insulating materials in high-frequency circuit boards, while the weak adhesion to the copper foils and the poor processability resulted from the fluorinated or rigid structures limited their high-frequency application. In this work, the low dielectric and high adhesive polyimide/fluorinated ethylene propylene (PI/FEP) nanocomposite film for high-frequency flexible circuit board application is developed. It is indicated that the fluorocarbon surfactants can significantly improve the dispersion of FEP in PI substrate, and thus, the PI/FEP nanocomposite film exhibits excellent mechanical properties, including the tensile strength increases to 46.6 MPa and the elongation at the break increases to 13.7%. Importantly, at the high-frequency of 10 GHz, the 60 wt% FEP filled PI nanocomposite film displays an ultralow dielectric loss (0.006) and a reduced dielectric constant (2.69). In addition, the high-frequency flexible circuit board with the PI/FEP film as the dielectric insulating layer has a high peel strength of 0.75 N mm⁻¹, indicating this PI/FEP nanocomposite film can meet the requirements of the high-frequency flexible circuit board application.     

Unique Dielectric Behavior of 0.6Pb(Ni1/2W1/2)O3·0.4PbTiO3 Derived from Mechanical Activation

0.6Pb(Ni_1/2W_1/2)O₃·0.4PbTiO₃(0.6PNW·0.4PT) of complex perovskite structure is successfully synthesized by mechanical activation of mixed oxide composition, followed by sintering at 950°C. It exhibits a considerably stable temperature dependence of dielectric constant over the wide temperature range of −120° to 20°C, although there occurs a dielectric peak at around 74°C. Raman spectroscopic studies show the coexistence of tetragonal and pseudocubic perovskite phases on sintering at 950°C, which are attributed to the inhomogeneous distribution of PbTiO₃ arising from mechanical activation. The dielectric behavior can be fine tuned by thermal annealing at 750°C, leading to phase redistribution in PNW-PT.