Effect of wastewater composition on archaeal population diversity

Distribution and occurrence of Archaea and methanogenic activity in a laboratory scale, completely mixed anaerobic reactor treating pharmaceutical wastewaters were investigated and associated with reactor performance. The reactor was initially seeded with anaerobic digester sludge from an alcohol distillery wastewater treatment plant and was subjected to a three step feeding strategy. The feeding procedure involved gradual transition from a glucose containing feed to a solvent stripped pharmaceutical wastewater and then raw pharmaceutical wastewater. During the start-up period, over 90% COD removal efficiency at an organic loading rate (OLR) of 6 kg COD m(-3)d(-1) was achieved with glucose feeding, and acetoclastic methanogenic activity was 336 ml CH4 gTVS(-1)d(-1). At the end of the primary loading, when the feed contained solvent stripped pharmaceutical wastewater at full composition, 71% soluble COD removal efficiency was obtained and acetoclastic methanogenic activity decreased to half of the rate under glucose feed (166 ml CH4 gTVS(-1)d(-1)). At the end of secondary loading with 60% (w/v) raw pharmaceutical wastewater, COD removal dropped to zero and acetoclastic methanogenic activity fell to less than 10 ml CH4 gTVS(-1)d(-1). Throughout the course of the experiment, microbial community structure was monitored by DGGE analysis of 16S rRNA gene fragments. Five different archaeal taxa were identified and the predominant archaeal sequences belonged to methanogenic Archaea. Two of these showed greatest sequence identity with Methanobacterium formicicum and Methanosaeta concilii. The types of Archaea present changed little in response to changing feed composition but the relative contribution of different organisms identified in the archaeal DGGE profiles did change.     

The effect of methyl-tri-n-butylammonium methylsulfate and graphite nanoplates on production of antistatic acrylic polymer

Methyl-tri-n-butylammonium methylsulfate (BIL) was incorporated into acrylic resin to improve antistatic property of acrylic polymer (AP). In order to avoid reduction in the mechanical properties of acrylic film and to reach higher electrical conductivity values, the combination of graphite nanoplates (Gr) and BIL was used. The effects of incorporation of BIL and Gr into AP on UV-blocking properties and UV transmittance data of acrylic films were measured. After 120 days, AP containing 5 wt% BIL and 0.01 wt% Gr, and AP+15 wt% BIL exhibited antistatic property. While BIL incorporation into acrylic resin deteriorated the mechanical properties, 0.01 wt% Gr incorporation increased the tensile strength by 83%.     

ARTIFICIAL NEURAL NETWORKS: PRINCIPLE AND APPLICATION TO MODEL BASED CONTROL OF DRYING SYSTEMS - A REVIEW

Abstract

This paper reviews the developments in the model based control of drying systems using Artificial Neural Networks (ANNs). Survey of current research works reveals the growing interest in the application of ANN in modeling and control of non-linear, dynamic and time-variant systems. Over 115 articles published in this area are reviewed. All landmark papers are systematically classified in chronological order, in three distinct categories; namely, conventional feedback controllers, model based controllers using conventional methods and model based controllers using ANN for drying process. The principles of ANN are presented in detail. The problems and issues of the drying system and the features of various ANN models are dealt with upto-date. ANN based controllers lead to smoother controller outputs, which would increase actuator life. The paper concludes with suggestions for improving the existing modeling techniques as applied to predicting the performance characteristics of dryers. The hybridization techniques, namely, neural with fuzzy logic and genetic algorithms, presented, provide, directions for pursuing further research for the implementation of appropriate control strategies. The authors opine that the information presented here would be highly beneficial for pursuing research in modeling and control of drying process using ANN     

A reassessment of Asian pacific excellence programs in higher education: the Taiwan experience

With the growth of competition between nations in our knowledge-based world economy, excellence programs are becoming a national agenda item in developing as well as developed Asian countries. The main purpose of this paper is to compare the goals, funding policies and selection criteria of excellence programs in China, Japan, Korea and Taiwan and to analyze the academic achievement of their top ranked universities in three areas: research output, internationalization, and excellence, by using data from the Shanghai Jiao Tong, QS, and HEEACT rankings. The effectiveness of Taiwan??s ??Development Plan for World Class Universities and Research Centers of Excellence?? was assessed as a case study in the paper via a survey targeting on 138 top administrators from 11 Taiwan??s universities and 30 reviewers. The study found that more funding nations had, the more outputs and outcomes they would gain, for example China. The Taiwan case demonstrates that world-class universities and research centers are needed in Asian nations despite the concerns for inequality which they raise.     

Secondary structure mapping of an RNA ligand that has high affinity for the MetJ repressor protein and interference modification analysis of the protein-RNA complex

The secondary structure of an RNA aptamer, which has a high affinity for the Escherichia coli MetJ repressor protein, has been mapped using ribonucleases and with diethyl pyrocarbonate. The RNA ligand is composed of a stem-loop with a highly structured internal loop. Interference modification showed that the bases within the internal loop, and those directly adjacent to it, are important in the binding of the RNA ligand to MetJ. Most of the terminal stem-loop could be removed with little effect on the binding. Ethylation interference suggests that none of the phosphate groups are absolutely essential for tight binding. The data suggest that the MetJ binding site on the aptamer is distinct from that of the natural DNA target, the 8-base pair Met box.     

Use of Salt Baths in the Temperature Range from 175?��C to 540?��C with Uncertainties of Less than 30?m��C

Calibration of thermometers in the temperature range from ?80 °C to 550 °C requires liquid baths; alcohol, water, silicon oil, salt baths and dry block furnaces. In this study, the use of salt baths outside of their usual range of 250 °C to 540 °C for calibrating thermometers in the range between 175 °C and 250 °C is proposed. The calibration range from 150 °C to 250 °C is usually covered by an oil bath, but utilizing a salt bath saves calibration time and resources, improves stability and homogeneity, allows longer term usage of the liquid, and reduces hazardous chemical vapors evaporated at temperatures above 175 °C. This proposal is based on a study of the uncertainty contributions at varying salt bath temperatures in the range from 175 °C to 540 °C which was carried out in this study. Results achieved and analyzed in this study indicate that the implementation of salt baths in this lower temperature range provides opportunities to calibrate reference and/or working thermometers with an uncertainty below 30 m°C, almost the same as the oil-bath uncertainty in the range of 175 °C to 250 °C. The main components of uncertainty contributed by a salt bath over this temperature range are discussed in this study.     

Comparative evaluation of full‐scale UASB reactors treating alcohol distillery wastewaters in terms of performance and methanogenic activity

In this study, two full‐scale upflow anaerobic sludge blanket (UASB) reactors, namely TUASB and CUASB, at the wastewater treatment plants of the Tekirdaǧ Alcohol (Raki) and Canakkale Alcohol (Cognac) distilleries were investigated in terms of performance, acetoclastic methanogenic capacity and microbial composition. The results were compared with a previously studied other UASB reactor (IUASB) at the wastewater treatment plant of the Istanbul Alcohol (Raki) Distillery from which the two reactors (TUASB and CUASB) were seeded. The IUASB reactor performed well achieving COD removal efficiencies of no lower than 85% at organic logding rates (OLRs) in the range of 6–11 kg COD m⁻³ day⁻¹ between 1996 and 2001. During the last one year of operation, between 2000 and 2001, performance of the CUASB reactor in terms of COD removal efficiency was 70–80% at OLRs in a range of 1–4.5 kg COD m⁻³ day⁻¹ whereas it was 60–80% at OLRs in a range of 2.5–8.5 kg COD m⁻³ day⁻¹ in the TUASB reactor. At the end of year 2000, specific methanogenic activity (SMA) tests were carried out to determine potential loading capacity and optimum operating conditions of the IUASB, CUASB and TUASB reactors. The potential methane production (PMP) rates of the CUASB, IUASB and TUASB reactors were measured as 230 cm³ CH₄ gVSS⁻¹ day⁻¹, 350 cm³ CH₄ gVSS⁻¹ day⁻¹ and 376 cm³ CH₄ gVSS⁻¹ day⁻¹ respectively. When the PMP rates were compared with actual methane production (AMP) rates obtained from the three UASB reactors, AMP/PMP ratios were evaluated to be 0.18, 0.12 and 0.13 for CUASB, TUASB and IUASB reactors respectively. This showed that the CUASB, TUASB and IUASB reactors were using only 18%, 12% and 13% of their potential acetoclastic methanogenic capacity respectively. These results can be interpreted that the three UASB reactors were underloaded compared with their potential acetoclastic methanogenic capacities. It was, therefore, recommended that the three UASB reactors should be loaded at higher organic loading rates or sludge withdrawn in order to maintain an AMP/PMP ratio of 0.6–0.7, which can ensure desired reactor performance with safer operation. Results of epifluoresence microscopic examinations showed that the percentage of total autofluorescent methanogens was approximately 30% of the total population in sludges from the TUASB and IUASB reactors whereas it was 20% in sludge from the CUASB reactor. The two UASB reactors treating raki distillery wastewaters contained sludges having a higher percentage of autofluorescent methanogenic population and higher acetoclastic methanogenic activity. Copyright © 2004 Society of Chemical Industry     

Hearing aid outcome measures for children

The provision of appropriate amplification for a young hearing-impaired child is critical as the aided speech signal will be used for the development of speech and language. The purpose of this paper is to provide an overview of the complex issues surrounding the documentation of hearing aid outcomes in the pediatric population. In the first two sections of the paper, the unique characteristics and needs of the pediatric population and factors complicating the measurement of outcome are described in detail. The third section provides a review of literature on existing outcome measures for children and the fourth section is devoted to a discussion of alternative approaches. The final section is an overview of clinical and research needs in the area of hearing aid outcome measures for children.