Cell Adhesion and in Vivo Osseointegration of Sandblasted/Acid Etched/Anodized Dental Implants

The authors describe a new type of titanium (Ti) implant as a Modi-anodized (ANO) Ti implant, the surface of which was treated by sandblasting, acid etching (SLA), and anodized techniques. The aim of the present study was to evaluate the adhesion of MG-63 cells to Modi-ANO surface treated Ti in vitro and to investigate its osseointegration characteristics in vivo. Four different types of Ti implants were examined, that is, machined Ti (control), SLA, anodized, and Modi-ANO Ti. In the cell adhesion study, Modi-ANO Ti showed higher initial MG-63 cell adhesion and induced greater filopodia growth than other groups. In vivo study in a beagle model revealed the bone-to-implant contact (BIC) of Modi-ANO Ti (74.20% ± 10.89%) was much greater than those of machined (33.58% ± 8.63%), SLA (58.47% ± 12.89), or ANO Ti (59.62% ± 18.30%). In conclusion, this study demonstrates that Modi-ANO Ti implants produced by sandblasting, acid etching, and anodizing improve cell adhesion and bone ongrowth as compared with machined, SLA, or ANO Ti implants. These findings suggest that the application of Modi-ANO surface treatment could improve the osseointegration of dental implant.     

Enhanced green upconversion luminescence properties of Er3+/Yb3+ co-doped strontium gadolinium silicate oxyapatite phosphor

Upconversion Sr₂(Gd_.98-xEr_.02Yb_x)₈Si₆O₂₆ (SGSO:2Er³⁺/xYb³⁺) phosphor materials were synthesized using a citrate sol-gel process. X-ray diffraction patterns confirmed their hexagonal structure. Field emission scanning electron microscopy images of SGSO:2Er³⁺/xYb³⁺ phosphors depicted submicron particles. The enhanced upconversion luminescence properties of SGSO:2Er³⁺/xYb³⁺ phosphors were analysed as a function of Yb³⁺ ion concentration and laser power. The energy transfer induced enhanced emission of the Er³⁺/ Yb³⁺ ions co-doped SGSO phosphors was ascribed to multi-phonon relaxation. The calculated chromaticity coordinates of the SGSO:2Er³⁺/xYb³⁺ phosphors showed emissions could be tuned by changing Yb³⁺ ion concentration. Optimized sample exhibited the chromaticity coordinate values near to the ultra-high definition television standard green emission coordinates.     

Isolation and identification of antimicrobial substances from Korean Lettuce (<Emphasis Type="Italic">Youngia sonchifolia</Emphasis> M.)

The aim of this study was to identify of antimicrobial substances from Korean Lettuce (Youngia sonchifolia M.). Water and ethanol extracts of Youngia sonchifolia M. exhibited antimicrobial activities against the microorganisms tested. Ethanol extract showed strong antimicrobial activities against most Gram positive and Gram negative microorganisms, whereas no lactic acid bacteria and yeasts were not affected. The antimicrobial compound G-6 was isolated from the ethyl acetate fraction obtained by silica gel column chromatography and HPLC and was confirmed as stable against heat treatment. Molecular weight of G-6 was calculated as 154 kDa based on information in the MS spectrum. G-6 was identified as 2-nonynoic acid (C₉H₁₄O₂) by UV, LC-EI/MS, and LC-CI/MS. In support of this, the chromatogram of G-6 was consistent with that of the 2-nonynoic acid standard. Antimicrobial activity of 2-nonynoic acid was identified in all samples, with a significant difference based on concentratio.     

Effects of work hardening models on low-cycle fatigue evaluations of coiled tubing with CT-100 steel

In the present study, low-cycle fatigue life of a coiled tubing (CT) with a CT-100 steel was evaluated by using various work hardening models. Tensile and low-cycle fatigue tests were performed, and experimental results were used to calibrate material model constants. A nonlinear finite element model was constructed in the ABAQUS program by using a CT fatigue test machine. During the test cycles, bending and straightening conditions were repeated and histories of strains were collected. The multiaxial low-cycle fatigue life was calculated by using Manson–Coffin relation and Tresca criterion. The kinematic and combined hardening models can be used to evaluate the fatigue life of CT, and their results are conservative compared with the fatigue test results. Results of the present study can be used as the basic data in establishing CT fatigue analysis.     

Experimental study on the life prediction of servo motors through model-based system degradation assessment and accelerated degradation testing

The advent of smart factories has resulted in the frequent utilization of industrial robots within factories to increase production automation and efficiency. Due to the increase in the number of industrial robots, it has become more important to prevent any unexpected breakdowns of the factory. As a result, the lifespan prediction of machinery has become a crucial factor because such failures can be directly associated with factory productivity resulting in significant losses. Most of the failures occur within one of the core components of the robot arm, the servo motor, and thus we will focus on the analysis of the servo motor in this study. However, sensor attachment to such equipment is considered difficult due to the dynamic movement of the robot arm, meaning that internal instrumentation should be utilized during analysis. In addition, no definite measure to determine the degradation of the motor exists, and thus a new degradation index is proposed in this study. Therefore, in this study, the lifespan of the servo motor will be estimated through accelerated degradation testing methods based on a new system degradation assessment method, which estimates the fault of the system using observer-based residuals with encoder data obtained from internal instrumentation.     

Pipe crack identification based on the energy method and committee of neural networks

A crack identification method using an equivalent bending stiffness for cracked beam and committee of neural networks is presented. The equivalent bending stiffness is constructed based on an energy method for a straight thin-walled pipe, which has a through-the-thickness crack, subjected to bending. Several numerical analysis for a steel cantilever pipe using the equivalent bending stiffness are carried out to extract the natural frequencies and mode shapes of the cracked beam. The extracted modal properties are used in constructing a training patterns of a neural network. The input to the neural network consists of the modal properties and the output is composed of the crack location and size. Multiple neural networks are constructed and each individual network is trained independently with the different initial synaptic weights. Then, the estimated crack locations and sizes from different neural networks are averaged. Crack detection is carried out for 16 damage cases using the proposed method, and the identified crack locations and sizes agree reasonably well with the exact values.     

Selective Coating of SnS on the Bio‐Inspired Moth‐Eye Patterned PEDOT:PSS Polymer Films

A new strategy for the selective coating of tin sulfide (SnS) on the surface of moth‐eye patterned (MEP) conducting polymer film is studied by considering the optical properties of the antireflective moth‐eye pattern and flexibility of polymer films. The semiconductor SnS is selectively coated on the surface of MEP microdomes of poly(3,4‐ethylenedioxythiophene) poly(styrene‐sulfonate) (PEDOT:PSS) film. The SnS coated MEP film is obtained by using pore selectively SnS thin layer functionalized polystyrene honeycomb‐patterned porous (HCP) film as a template. Aqueous PEDOT:PSS solution is poured on the SnS functionalized HCP films and detached for the fabrication of SnS coated MEP films. The films show a satisfactory photo‐responsive property under solar stimulated light illumination due to the antireflective MEP structure of PEDOT film and homogenous SnS coating on the surface of the conducting polymer.     

An effective security measures for nuclear power plant using big data analysis approach

The Journal of Supercomputing - Among the many hacking attempts carried out against information systems for the past few years, cyber-attacks that could lead to a national-level threat included...