A new design strategy for DC/DC LLC resonant converter: Concept,modeling, and fabrication

In this paper, a new design procedure for LLC converter has been introduced. In fact, this method is a computer-based design algorithm based on a numerical technique. In the process of designing, the value of the resonant element is obtained by solving the LLC converter fundamental equation. This converter will be controlled by using state feedback, such as output voltage variable. As a matter of fact, in a control system, the change of output voltage (because of load variation) will affect the switching frequency, so the output voltage will be tuned. In the designing process, the fundamental equations of LLC converter are obtained, and the value of the resonant elements is calculated. Also, a comparison analysis is carried out between the proposed and typical methods. The simulation is done to investigate the validity of the proposed method. Moreover, a prototype is manufactured, and the experimental test is done to evaluate its applicability.     

Modeling dynamic viscosity of n-alkanes using LSSVM technique

One of the important thermophysical properties is viscosity which expresses the resistance of fluid to flow. The least squares support vector machine (LSSVM) algorithm is proposed as a novel method for prediction of dynamic viscosity of different normal alkanes in a wide range of pressure and temperature. As this study is purely computational, 228 experimental data points were gathered from literature for training and validation of the model. The outcomes of the LSSVM algorithm were compared with the actual data with acceptable average absolute relative deviation and the coefficient of determination (R²) of 1.014 and 0.9968, respectively. The comparisons showed that the predicting model has the potential of prediction of n-alkane dynamic viscosity in terms of pressure, temperature, and carbon number of n-alkane, so this strategy can be used as a simple tool for predicting the behavior of reservoir fluids.     

Perspectives on management theory’s application in the internet of things research

Information Systems and e-Business Management - The growing use of the internet of things (IoT) has provided businesses with a new opportunity. This study performed a systematic literature review...     

An efficient and stable method to cluster software modules using ant colony optimization algorithm

The Journal of Supercomputing - Software evolution is a natural phenomenon due to the changing requirements. Understanding the program structure is a significant and complicated factor in...     

A model for stress-dependence of apparent permeability in nanopores of shale gas reservoirs

Predicting long-term production from gas shale reservoirs is a challenging task due to changes in effective stress and permeability during gas production. Unlike coal, the variation of sorbing gas permeability with pore pressure in shale does not always feature a biphasic trend under a constant confining pressure. The present contribution demonstrates that the biphasic dependence of permeability on pore pressure depends on a number of physical and geometrical factors, each with a distinct impact on gas permeability. This includes pore size, adsorption isotherm, and the variation of gas viscosity with pore pressure. A single-capillary model is proposed for the apparent permeability of real gas in shale. Results indicate that the biphasic relation between apparent permeability and pore pressure is prevalent when the sorbing gas flows in sufficiently small pores. In addition, the effects of sorption isotherm and internal resistance of nonideal gas to flow cannot be ignored.     

Study of the behavior of mechanically stabilized earth (MSE) walls subjected to differential settlements

The limit equilibrium (LE) analysis has been used to design MSE walls. Presumably, the deflection of MSE walls can be limited to an acceptable range by ensuring sufficient factors of safety (FOSs) for both external and internal stabilities. However, unexpected ground movements, such as movements induced by excavations, volume changes of expansive soils, collapse of sinkholes, and consolidations of underlying soils, can induce excessive differential settlements that may influence both the stability and the serviceability of MSE walls. In this study, a numerical model, which was calibrated by triaxial tests and further by a specially-designed MSE wall tests, investigated the behavior of an MSE wall as well as the influence of various factors on the performance of the MSE wall when the wall facing settled relatively to the reinforced zone. The numerical results showed that the differential settlement would cause substantial vertical and horizontal movements for the MSE wall, as well as an increase in lateral earth pressure and geosynthetic reinforcement strain. The maximum horizontal movement and increase of the lateral earth pressure occurred at about 1.0 m above the toe. The differential settlement resulted in a critical plane that coincided with the plane of 45°+?/2. The maximum increase of the strain for each geogrid layer occurred in that plane, and the bottom layer had the greatest strain increase among all layers of reinforcement. The study further indicated that the surcharge, backfill friction angle, tensile stiffness of geogrid, reinforcement length and MSE wall height had noticeable influences on horizontal and vertical movements, and strain in geosynthetics. According to the results, the MSE wall that had a higher factor of safety would have less movements and geosynthetic strain increase. In contrast, only the friction angle, tensile stiffness and MSE wall height showed some degree of influence on the lateral earth pressure due to differential settlements.     

Performance evaluation of modified rotating-jet electrospinning method by investigating the effect of collector size on the nanofibers alignment

Modified rotating-jet electrospinning method (MRJM) is a new electrospinning technique with a novel setup including two metallic concentric hollow cylinders for generating highly aligned fibers. In this report, an experimental study was carried out to evaluate the effectiveness of MRJM for generating highly aligned nanofibers. For this purpose, the effect of voltage in the range of 10–22 kV, inner collector diameter in the range of 20–50 cm, and outer collector diameter in the range of 30–60 cm, on alignment degrees of electrospun fibers were explored and the results for each set of parameters were compared with those obtained for rotating-jet electrospinning method (RJM). The obtained results indicated that the alignment degrees of electrospun fibers in MRJM were significantly higher than those of RJM. The maximum achievable alignment degree in MRJM was around 82 % that was higher than the corresponding maximum value (40 %) of RJM. Although the effect of applied voltage on the degree of alignment in MRJM was observed to be negligible, it was experimentally proved that by manipulating the outer cylinder diameter, the degree of alignment can be increased up to 20 %. To achieve a conceptual understanding of the reason for significant influence of the outer cylinder on the elecrospinning performance, a formula was derived according to the Gauss’s law in the last part of this paper that relates the electric field strength inside the region between the inner cylinder and the spinneret to the radii of inner and outer cylinders.     

硫化铅纳米粒子的三阶非线性光学特性研究

针对硫化铅(PbS)特殊的三阶非线性光学特性,本文在水溶液里合成了PbS纳米粒子.紫外-可见光谱显示,由于使用了封端剂,合成的样品更加稳定.用紫外-可见吸收光谱和X射线衍射斑研究了PbS纳米粒子的特性,结果表明,由于纳米粒子尺寸减小,其吸收光谱显示极大的蓝移.利用Seherre方程估计PbS粒子的平均粒径约为8.2 n...