Experimental study and numerical modeling of mixing by air injection in yield stress fluids using the OpenFOAM software

Mixing by gas injection is an operation used in industrial processes such as wastewater treatment, metallurgy, or methanization in which pressurized gas is injected into a fluid in order to reduce concentrations and temperatures gradients. This study demonstrates how the CFD toolbox OpenFOAM can be used to simulate such flows. Experimental measurements and observations have been performed on a pilot-scale reactor where pressurized air is injected in a yield stress fluid. The volume of fluid method and an adaptive mesh with refinement at the interface have been used to track the gas inclusions. The numerical model accuracy has been assessed by comparing experimental and numerical results related to the bubble's frequency, dimensions, and rising velocities as well as the fluid recirculation, yielded, and unyielded regions in the tank. The influence of injection parameters such as the injection flow rate and the fluid rheological parameters has been quantified.     

Effect of cutting process on the stress corrosion susceptibility of AISI 304L stainless steel

During manufacturing of a component, cutting, turning, grinding, and milling operations are inevitable and these operations induce surface residual stresses. In this study, it is shown that, depending on the process employed for cutting, residual stresses generated at the cut surfaces can vary widely and they can, in turn, make the cut surfaces of austenitic stainless steel (SS) prone to stress corrosion cracking (SCC). An austenitic SS 304L plate was cut using three different procesess: bandsaw cutting, cutting using the cut-off wheel, and shearing. Surface residual stress measurement using the X-ray diffraction (XRD) technique is carried out close to the cutting edges and on the cross-section. SCC susceptibility studies were carried out as per ASTM G36 in 45% boiling magnesium chloride solution. Optical microscopic examination showed the presence of cracks, and confocal microscopy was used to measure the depth of cracks. The study confirmed that high tensile residual stresses present in the cut surfaces produced by cut-off wheel and shear cutting make the surfaces susceptible to SCC while the surfaces produced by bandsaw cutting are resistant to SCC. Hence, it is shown that there is a definite risk of SCC for product forms of austenitic SS with cut surfaces produced using cutting processes that generate high tensile residual stresses stored for a long period of time in a susceptible environment.     

Special Issue on Generating Realistic Visual Data of Human Behavior

International Journal of Computer Vision -     

Design,Synthesis, Radiosynthesis and Biological Evaluation of Fenretinide Analogues as Anticancer and Metabolic Syndrome-Preventive Agents

Fenretinide (4-HPR) is a synthetic derivative of all-trans-retinoic acid (ATRA) characterised by improved therapeutic properties and toxicological profile relative to ATRA. 4-HPR has been mostly investigated as an anti-cancer agent, but recent studies showed its promising therapeutic potential for preventing metabolic syndrome. Several biological targets are involved in 4-HPR's activity, leading to the potential use of this molecule for treating different pathologies. However, although 4-HPR displays quite well-understood multitarget promiscuity with regards to pharmacology, interpreting its precise physiological role remains challenging. In addition, despite promising results in vitro, the clinical efficacy of 4-HPR as a chemotherapeutic agent has not been satisfactory so far. Herein, we describe the preparation of a library of 4-HPR analogues, followed by the biological evaluation of their anti-cancer and anti-obesity/diabetic properties. The click-type analogue 3 b showed good capacity to reduce the amount of lipid accumulation in 3T3-L1 adipocytes during differentiation. Furthermore, it showed an IC₅₀ of 0.53±0.8 μM in cell viability tests on breast cancer cell line MCF-7, together with a good selectivity (SI=121) over noncancerous HEK293 cells. Thus, 3 b was selected as a potential PET tracer to study retinoids in vivo, and the radiosynthesis of [¹⁸F] 3b was successfully developed. Unfortunately, the stability of [¹⁸F] 3b turned out to be insufficient to pursue imaging studies.     

Bench-scale bubbling fluidized bed systems around the world - Bed agglomeration and collapse: A comprehensive review

Thermochemical conversion by gasification process is one of the most relevant technologies for energy recovery from solid fuel, with an energy conversion efficiency better than other alternatives like combustion and pyrolysis. Nevertheless, the most common technology used in the last decades for thermochemical conversion of solid fuel through gasification process, such as coal, agriculture residues or biomass residues are the fluidized bed or bubbling fluidized bed system. For these gasification technologies, an inert bed material is fed into reactor to improve the homogenization of the particles mixture and increase the heat transfer between solid fuel particles and the bed material. The fluidized bed reactors usually operate at isothermal bed temperatures in the range of 700–1000 °C, providing a suitable contact between solid and gas phases. In this way, chemical reactions with high conversion yield, as well as an intense circulation and mixing of the solid particles are encouraged. Moreover, a high gasification temperature favours carbon conversion efficiency, increasing the syngas production and energy performance of the gasifier. However, the risk of eutectic mixtures formation and its subsequent melting process are increased, and hence the probability of bed agglomeration and the system collapse could be increased, mainly when alkali and alkaline earth metals-rich biomasses are considered. Generally, bed agglomeration occurs when biomass-derived ash reacts with bed material, and the lower melting temperature of ash components promotes the formation of highly viscous layers, which encourages the progressive agglomerates creation, and consequently, the bed collapse and system de-fluidization. Taking into account the relevance of this topic to ensure the normal gasification process operating, this paper provides several aspects about bed agglomeration, mostly for biomass gasification systems. In this way, chemistry and mechanism of bed agglomeration, as well as, some methods for in-situ detection and prediction of the bed agglomeration phenomenon are reviewed and discussed.     

An Artificial Nocturnal Flower via Humidity‐Gated Photoactuation in Liquid Crystal Networks

Beyond their colorful appearances and versatile geometries, flowers can self‐shape‐morph by adapting to environmental changes. Such responses are often regulated by a delicate interplay between different stimuli such as temperature, light, and humidity, giving rise to the beauty and complexity of the plant kingdom. Nature inspires scientists to realize artificial systems that mimic their natural counterparts in function, flexibility, and adaptation. Yet, many of the artificial systems demonstrated to date fail to mimic the adaptive functions, due to the lack of multi‐responsivity and sophisticated control over deformation directionality. Herein, a new class of liquid‐crystal‐network (LCN) photoactuators whose response is controlled by delicate interplay between light and humidity is presented. Using a novel deformation mechanism in LCNs, humidity‐gated photoactuation, an artificial nocturnal flower is devised that is closed under daylight conditions when the humidity level is low and/or the light level is high, while it opens in the dark when the humidity level is high. The humidity‐gated photoactuators can be fueled with lower light intensities than conventional photothermal LCN actuators. This, combined with facile control over the speed, geometry, and directionality of movements, renders the “nocturnal actuator” promising for smart and adaptive bioinspired microrobotics.     

Enzymatic Responses to Low-Intensity Radiation of Tritium

The present study considers a possible role of enzymatic reactions in the adaptive response of cells to the beta-emitting radionuclide tritium under conditions of low-dose exposures. Effects of tritiated water (HTO) on the reactions of bacterial luciferase and NAD(P)H:FMN-oxidoreductase, as well as a coupled system of these two reactions, were studied at radioactivity concentrations ≤ 200 MBq/L. Additionally, one of the simplest enzymatic reactions, photobiochemical proton transfer in Coelenteramide-containing Fluorescent Protein (CLM-FP), was also investigated. We found that HTO increased the activity of NAD(P)H:FMN-oxidoreductase at the initial stage of its reaction (by up to 230%); however, a rise of luciferase activity was moderate (<20%). The CLM-FP samples did not show any increase in the rate of the photobiochemical proton transfer under the exposure to HTO. The responses of the enzyme systems were compared to the ‘hormetic’ response of luminous marine bacterial cells studied earlier. We conclude that (1) the oxidoreductase reaction contributes significantly to the activation of the coupled enzyme system and bacterial cells by tritium, and (2) an increase in the organization level of biological systems promotes the hormesis phenomenon.