Relating catalyst structure and composition to the water–gas shift activity of Cu–Zn-based mixed-oxide catalysts

In order to investigate the effect of cerium oxide on Cu–Zn-based mixed-oxide catalysts four catalyst samples were characterized by means of XRD, in situ XANES and thermogravimetric analysis. The activity of the catalyst samples was tested for the forward water–gas shift reaction. Cerium oxide was found to increase the crystallinity of the ZnO phase indicating a segregation of the Cu and ZnO phases. The TOF of the water–gas shift reaction based on chemisorption data was found to be independent of composition and preparation conditions of the four catalyst samples. In contrast, the catalyst stability depends on composition and preparation conditions. Cerium oxide impregnated before calcination of the hydrotalcite-based Cu–Zn precursors leads to a more stable water–gas shift catalyst.     

Detection of human papillomavirus in routinely processed biopsy specimens from laryngeal papillomas: evaluation of reproducibility of polymerase chain reaction and DNA in situ hybridization procedures

The frequency of human papillomavirus (HPV) in laryngeal papillomas varies largely among different studies. DNA in situ hybridization (ISH) has been the most widely used method for detection of HPV. The aim of this study was to compare the reproducibility and sensitivity of ISH with polymerase chain reaction (PCR) in 35 specimens of laryngeal papillomas routinely fixed in buffered or unbuffered formalin. Out of 12 specimens fixed in buffered formalin, 10 were positive for HPV 6/11 using ISH. The procedure was repeated three times and three specimens were positive only twice. Nine biopsies were positive for HPV using PCR with consensus primers (My 09/11) on dewaxed tissue without extracting DNA. In three repeated PCRs, the results were inconsistent in three samples. After DNA extraction, all 12 samples were positive with PCR. Of the 23 specimens fixed in unbuffered formalin, 14 were HPV-positive with ISH, while only one was positive with PCR. We concluded that PCR with My 09/11 consensus primers is a highly sensitive method for detection of HPV in laryngeal papillomas fixed in buffered formalin, but useless for samples fixed in unbuffered formalin. When DNA was extracted from the former type of fixed tissue, the results were highly reproducible. In contrast to PCR, ISH appeared to be less influenced by fixation procedure, but it was not as reproducible and sensitive as PCR. Negative results did not necessarily mean absence of HPV.     

Separate assessment of porosity and uncombined carbon in cemented carbides

Porosity and uncombined carbon in cemented carbides are traditionally assessed by comparison to standardized microstructure charts, such as those in ISO 4505-1978. To improve the accuracy in the characterization a fully automatic image analysis procedure has been developed. The analysis is performed using light optical microscopy on unetched polished specimens. The implemented algorithm separates uncombined carbon, C-defects, from pores, A- and B-defects. Pores are approximately distributed in a random way in the structure. Uncombined carbon is on the other hand precipitated into clusters of carbon particles. This difference is together with defect size used as a base for the separation. Small defects situated close together are classified as C-defects, small isolated defects as A-pores and large defects as B-pores. Pores are found to be more round than the somewhat elongated C-defects. The difference in shape is significant and can also be used as a separation criterion.

Image analysis is used to quantitatively characterise the ISO 4505-1978 standard charts with respect to volume fraction, number density and size distribution of defects. The results are compared to measured distributions for true microstructures.     

Non-point sources and the waste discharge charge system.

The development of a waste discharge charge system (WDCS) in South Africa has been proposed to promote waste reduction and water conservation. The WDCS is based on the polluter pays principle and is designed such that the management of waste discharges achieves resource quality objectives (RQOs) at the minimum total cost to the catchment. Two charges are distinguished: first a charge for optimising use of the resource (incentive charge); and secondly, a charge for development and operation of mitigation measures in the resource (mitigation charge). The WDCS is applied to both point sources and non-point sources (NPS) of contamination. In the inclusion of NPS, the charge system distinguishes between registered and non-registered NPS, with the charge applied to the former group only, in the first instance. This paper introduces the WDCS by describing the principles and the theoretical basis of the WDCS, highlighting the link to RQOs as the benchmark of acceptable externalities. The paper explores the inclusion of NPS in the WDCS, describing: first, the principles of NPS inclusion in the WDCS; secondly, the types of NPS included in the present version of the WDCS; thirdly, the methodology for charge estimation; and finally, non-registered NPS and their potential inclusion in future editions of the WDCS. The paper concludes with remarks and challenges facing the first edition of the WDCS.     

Expert performance: Its structure and acquisition.

Counter to the common belief that expert performance reflects innate abilities and capacities, recent research in different domains of expertise has shown that expert performance is predominantly mediated by acquired complex skills and physiological adaptations. For elite performers, supervised practice starts at very young ages and is maintained at high daily levels for more than a decade. The effects of extended deliberate practice are more far-reaching than is commonly believed. Performers can acquire skills that circumvent basic limits on working memory capacity and sequential processing. Deliberate practice can also lead to anatomical changes resulting from adaptations to intense physical activity. The study of expert performance has important implications for our understanding of the structure and limits of human adaptation and optimal learning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A detailed analysis of ambipolar diffusion in nanostructured metal oxide films

In this paper a transport equation is derived which describes the behaviour of the nanostructured metal oxide films in a photoelectrochemical cell. It is shown that a detailed analysis of the charge compensation mechanism necessarily leads to a transport equation with characteristics similar to but logically distinct from the pure diffusion equation. The studied phenomenon was named ambipolar diffusion in the early 1950s. It takes into account the fact that the diffusion processes of ions and electrons occur at different speeds. A weak electric field therefore couples the processes together to preserve charge neutrality. The electric field in turn affects the transport resulting in a deviation from purely diffusive behaviour. However, this has not been widely recognised in the literature for nanostructured semiconductor films until very recently. In this paper a detailed analysis is presented. It is based on the assumption that the current density is solenoidal. It is shown that application of the ambipolar diffusion model to a photoelectrochemical cell based on a nanostructured metal oxide film leads to an additional term in the transport equation, rather than only a new diffusion coefficient as in earlier work. It is also shown that the boundary conditions interact closely with the equation to form a transport model.     

Existence of discrete-time LQG-controllers

Existence results for the LQG-controller are investigated. An infimal Riccati equation based controller may potentially give closed loop eigenvalues on the unit circle. Assuming left and right invertibility it is shown that there exists an optimal controller if and only if the Riccati equation based controller stabilizes the closed loop system after removal of all its unobservable and uncontrollable modes. Furthermore this reduced controller is the optimal controller, and its transfer function is unique. This existence condition is a considerable simplification of the more general geometric condition recently derived by Trentelman and Stoorvogel.     

A note on the min-max formulation of stiffness optimization including non-zero prescribed displacements

The present theoretical note shows how a natural objective function in stiffness optimization, including both prescribed forces and non-zero prescribed displacements, is the equilibrium potential energy. It also shows how the resulting problem has a saddle point character that may be utilized when calculating sensitivities.     

Continuous production of structured phospholipids in a packed bed reactor with lipase from <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis>

The possibilities of producing structured phospholipids between soybean phospholipids and caprylic acid by lipase-catalyzed acidolysis were examined in continuous packedbed enzyme reactors. Acidolysis reactions were performed in both a solvent system and a solvent-free system with the commercially immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) as catalyst. In the packed bed reactors, different parameters for the lipase-catalyzed acidolysis were elucidated, such as solvent ratio (solvent system), temperature, substrate ratio, residence time, water content, and operation stability. The water content was observed to be very crucial for the acidolysis reaction in packed bed reactors. If no water was added to the substrate during reactions under the solvent-free system, very low incorporation corporation of caprylic acid was observed. In both solvent and solvent-free systems, acyl incorporation was favored by a high substrate ratio between acyl donor and phospholipids, a longer residence time, and a higher reaction temperature. Under certain conditions, the incorporation of around 30% caprylic acid can be obtained in continuous operation with hexane as the solvent. Presented at the 95th American Oil Chemists' Society Annual Meeting and Expo in Cincinnati, Ohio, May 10, 2004.