Indoor wood dust analysis during machining with an original experimental device

Particles generated by wood machining have a proven impact on the health of users and woodworkers. The aim of this study was to quantify and describe wood particles in solid and gas phases to reliably and reproducibly characterise these emissions. First, we developed an experimental device that produced particles from solid wood and wood-based panels using portable machine tools. The objective was to study the particles emitted by wood machining while avoiding ambient pollution. Based on own technical specifications, the experimental system was defined and composed of various elements that integrated treatment of inlet air through wood machining to the analysis section that allows solid and gas phases. The first experiments were carried out in sanding and sawing modes on materials used in construction, including solid wood (spruce) and composite panels (particle board (PB), oriented strand board (OSB), and medium density fibreboard (MDF)). Wood-based panels showed more emissive behaviour than solid wood, both for the solid phase and the gas phase. These tests validate the feasibility of generating and measuring particles and emissions of volatile organic compounds (VOCs). Further modifications to the experimental device would enable us to integrate additional devices, such as toxicological ones, to better understand the impact of these wood particles on the health of woodworkers.

     

Hydrogen storage performance of methyl-substituted mesoporous silica with tailored textural characteristics

Journal of Porous Materials - The present study reports a systematic analysis of morphology and hydrogen sorption capacity of mesoporous organic-inorganic silica prepared by varying the silica...     

Effect of height on the corrosion of steel and galvanized steel in nontropical coastal marine environments

In this study, the behavior of carbon steel and galvanized steel in nontropical coastal marine environments was evaluated. Evaluation was carried out with specimens with dimensions of 10 cm × 10 cm × 0.3 cm. These specimens were exposed to four testing stations (Iquique, Mejillones, Los Vilos, and San Vicente), where racks were installed both at ground level (ground), as well as in the upper zone of electrical transmission towers (tower). In each station, 24 specimens of A36 carbon steel and galvanized steel were placed (12 each). The corrosivity of the environment was measured using the ISO 9223, 9225, and 9226 standards. The specimens were evaluated on-site, monthly, through visual inspection and photographic record. Once withdrawn, the corrosion rate was determined and the corrosion products were analyzed through Raman and Fourier-transform infrared. The results show that, in all cases, the corrosion rate is greater in the tower than on the ground. However, even though the Los Vilos station is located farther from the sea (3,500 vs. ≈500 m), the corrosion rate of steel in the tower is the highest. This is caused by the generation of HCl from the transformation of lepidocrocite into goethite, in the presence of low chloride content, which acidifies the steel/corrosion product interface. In the case of galvanized steel, the corrosion rate is a function of the chloride content in the atmosphere, obtaining an excellent correlation between both parameters.     

A pragmatic approach to hierarchical categorization of research expertise in the presence of scarce information

International Journal on Digital Libraries - Throughout the history of science, different knowledge areas have collaborated to overcome major research challenges. The task of associating a...     

Advances in neutron imaging

Imaging techniques based on neutron beams are rapidly developing and have become versatile non-destructive analyzing tools in many research fields. Due to their intrinsic properties, neutrons differ strongly from electrons, protons or X-rays in terms of their interaction with matter: they penetrate deeply into most common metallic materials while they have a high sensitivity to light elements such as hydrogen, hydrogenous substances, or lithium. This makes neutrons perfectly suited probes for research on materials that are used for energy storage and conversion, e.g., batteries, hydrogen storage, fuel cells, etc. Moreover, their wave properties can be exploited to perform diffraction, phase-contrast and dark-field imaging experiments. Their magnetic moment allows for resolving magnetic properties in bulk samples. This review will focus on recent applications of neutron imaging techniques in both materials research and fundamental science illustrated by examples selected from different areas.     

Deoxynivalenol in wheat,maize, wheat flour and pasta: surveys in Hungary in 2008–2015

Among Fusarium mycotoxins, deoxynivalenol (DON) is the most common contaminant in case of cereals and cereal-based foods in Hungary. In this study, Hungarian wheat (n = 305), maize (n = 108), wheat flour (n = 179) and pasta (n = 226) samples were analysed (N = 818). The samples were collected during 2008–2015 in Hungary. Applied methods of analysis were enzyme-linked immunosorbent assay and liquid-chromatography coupled with a mass spectrometer. Results were compared and evaluated with Hungarian weather data. Among cereal samples, in 2011, wheat was contaminated with DON (overall average ± standard deviation was 2159 ± 2818 µg kg^?1), which was above the maximum limit (ML). In case of wheat flour and pasta, no average values above ML were found during 2008–2015, but higher DON contamination could be observed in 2011 as well (wheat flour: 537 ± 573 µg kg^?1; pasta: 511 ± 175 µg kg^?1).     

Optimal inspection for randomly triggered hidden deterioration processes

This paper deals with degradation processes whose onset is triggered at a random time and which stay hidden until they are discovered through inspection or when they begin to show symptoms. This is applicable in many healthcare and industrial scenarios, for example, in the modeling of breast cancer or termite infestation. In our model, we assume that symptoms appear after hitting a random critical threshold and that inspections may have a sensitivity less than one as well as a nonzero false positive rate. The expected cost of repair is derived, and the inspection rate is optimized for a cycle (which lasts from degradation-free to repaired state). This gives results for three cases: the first is for a finite observation period with no degradation recurrence, the second for infinite time horizon allowing recurrence. In the third case, we derive an upper bound for the expected cost in a given constant time period. Finally, the model is applied to determine the optimal strategy for breast cancer screening with regard to the effects of different parametrizations.     

The Photomontage Activity of Postmodernism

For decades now, Douglas Crimp’s landmark 1980 essay ‘The Photographic Activity of Postmodernism’ has shaped our understanding of modernism’s aftermath, at least as it unfolded in North America and Western Europe. Less remembered, however, is the degree to which the procedures of disjunction, copying, appropriation, and outright theft that he highlighted were epitomised not just by contemporary photography, but by photomontage in particular. This article recovers the debates that led critics such as Crimp, Abigail Solomon-Godeau, Christopher Phillips, Benjamin Buchloh and others to turn to photomontage as one of their principal objects of concern in what became known as the postmodern critique of photography. Why was montage tasked to perform this critical function, particularly by people around the journal October who had not otherwise devoted the balance of their writing to photography’s history? The article suggests that these men and women, along with the contemporary artists they foregrounded, manifested what Mary Anne Doane has called a ‘desire for signification’, a reaction in the late 1970s against the mute theatricality of minimalist and conceptual art. Photomontage reintroduced representation to contemporary art and to the canon of art history. But unlike the reemerging illusionism in painting that also manifested this desire, montage guarded against an uncomplicated realism by highlighting and critiquing operations of representation in a manner that painting no longer could.     

Azaaurones as Potent Antimycobacterial Agents Active against MDR- and XDR-TB

Herein we report the screening of a small library of aurones and their isosteric counterparts, azaaurones and N-acetylazaaurones, against Mycobacterium tuberculosis. Aurones were found to be inactive at 20 μm , whereas azaaurones and N-acetylazaaurones emerged as the most potent compounds, with nine derivatives displaying MIC₉₉ values ranging from 0.4 to 2.0 μm . In addition, several N-acetylazaaurones were found to be active against multidrug-resistant (MDR) and extensively drug-resistant (XDR) clinical M. tuberculosis isolates. The antimycobacterial mechanism of action of these compounds remains to be determined; however, a preliminary mechanistic study confirmed that they do not inhibit the mycobacterial cytochrome bc1 complex. Additionally, microsomal metabolic stability and metabolite identification studies revealed that N-acetylazaaurones are deacetylated to their azaaurone counterparts. Overall, these results demonstrate that azaaurones and their N-acetyl counterparts represent a new entry in the toolbox of chemotypes capable of inhibiting M. tuberculosis growth.     

Biodegradation of poly(lactic acid)—cassava bagasse composites produced by injection molding

Neat poly (lactic acid) (PLA) and PLA/cassava bagasse (CB) composites were used to produce seedling tubes by extrusion and injection molding. The tubes were buried in simulated soil, and their biodegradation was investigated by weight loss, scanning electron microscopy (SEM), and Fourier transform infrared spectroscopy (FTIR). After 180 days, the composites' biodegradation was higher than neat PLA material, and the higher the CB content, the higher the biodegradation, which caused fissures and voids in the material. The biodegradation of PLA/CB composites increased the phosphorus content in the soil after 180 days. Composites of PLA with CB, an abundant agro-industrial residue in Brazil, are promising because they can reduce the environmental impact due to CB's proper destination, and the composites' costs and biodegradation are faster than pure PLA material. Both the faster biodegradation of the tube and the higher P content are advantageous for seedling tubes.