Ultimate bearing capacity of strip footing resting on clay soil mixed with tire-derived aggregates

This study investigated the use of recycled tire-derived aggregate (TDA) mixed with kaolin as a method of increasing the ultimate bearing capacity ( UBC) of a strip footing. Thirteen 1g physical modeling tests were prepared in a rigid box of 0.6 m × 0.9 m in plan and 0.6 m in height. During sample preparation, 0%, 20%, 40%, or 60% (by weight) of powdery, shredded, small-sized granular (G 1–4 mm) or large-sized granular (G 5–8 mm) TDA was mixed with the kaolin. A strip footing was then placed on the stabilized kaolin and was caused to fail under stress-controlled conditions to determine the UBC. A rigorous 3D finite element analysis was developed in Optum G-3 to determine the UBC values based on the experimental test results. The experimental results showed that, except for the 20% powdery TDA, the TDA showed an increase in the UBC of the strip footing. When kaolin mixed with 20% G (5–8 mm), the UBC showed a threefold increase over that for the unreinforced case. The test with 20% G (1–4 mm) recorded the highest subgrade modulus. It was observed that the UBC calculated using finite element modeling overestimated the experimental UBC by an average of 9%.     

Increased Emulsion Stability for Reverse Y‐Shaped Sugar‐Based Surfactants

A series of reverse Y‐shaped surfactants containing aromatic and aliphatic linkers to combine two short hydrocarbon chains and one carbohydrate head group was prepared. Liquid crystalline behavior, air–water interfacial properties, and efficiency as an emulsifier was investigated for each reverse Y‐shaped surfactant. All reverse Y‐shaped surfactants mediated higher emulsion stabilities for water‐in‐oil compared to common typical reference surfactants, reflecting an improved ability to cope with a curvature towards water. The introduction of a benzene ring into the linker substantially increased the affinity of the surfactant for hydrophobic media, resulting in improved emulsion stability for both water‐in‐oil and oil‐in‐water.     

MHD flow of a micropolar fluid towards a vertical permeable plate with prescribed surface heat flux

The problem of a steady mixed convection stagnation point flow towards a permeable vertical plate with prescribed surface heat flux immersed in an incompressible micropolar fluid is studied numerically. The governing partial differential equations are first transformed into a system of ordinary differential equations using a similarity transformation, before being solved numerically by a finite-difference scheme known as the Keller-box method and the Runge–Kutta–Fehlberg method with shooting technique. The effects of the material parameter, buoyancy parameter, suction/injection parameter and the Prandtl number on the fluid flow and heat transfer characteristics are discussed. It is found that dual solutions exist for both assisting and opposing flows. The skin friction coefficient and the local Nusselt number increase in the presence of suction and magnetic field. Moreover, suction as well as fluids with larger Prandtl number widens the range of the buoyancy parameter for which the solution exists.     

Support vector regression methodology for prediction of input displacement of adaptive compliant robotic gripper

The prerequisite for new versatile grippers is the capability to locate and perceive protests in their surroundings. It is realized that automated controllers are profoundly nonlinear frameworks, and a faultless numerical model is hard to get, in this way making it troublesome to control utilizing tried and true procedure. Here, a design of an adaptive compliant gripper is presented. This design of the gripper has embedded sensors as part of its structure. The use of embedded sensors in a robot gripper gives the control system the ability to control input displacement of the gripper and to recognize specific shapes of the grasping objects. Since the conventional control strategy is a very challenging task, soft computing based controllers are considered as potential candidates for such an application. In this study, the polynomial and radial basis function (RBF) are applied as the kernel function of Support Vector Regression (SVR) to estimate and predict optimal inputs displacement of the gripper according to experimental tests and shapes of grasping objects. Instead of minimizing the observed training error, SVR _poly and SVR _rbf attempt to minimize the generalization error bound so as to achieve generalized performance. The experimental results show that an improvement in predictive accuracy and capability of generalization can be achieved by the SVR approach compared to other soft computing methodology.     

Efficiency of hydrogen internal combustion engine combined with open steam Rankine cycle recovering water and waste heat

A hydrogen internal combustion engine (HICE) wastes more heat, and producing nearly three times more water than a conventional engine. This paper describes the principle behind a novel waste heat recovery sub-system that exploits the water produced by an HICE as the working fluid for an open-cycle power generation system based on the Rankine cycle. Water from the HICE exhaust is superheated by the waste heat from the HICE and used to produce power in a steam expander. A fundamental thermodynamic model shows the contribution of the sub-system to the overall thermal efficiency of the HICE at various engine speeds, with and without a condenser. The results show that the condenser is not cost-effective and that the overall thermal efficiency with the proposed sub-system is 27.2% to 33.6%, representing improvements of 2.9% to 3.7%, at engine speeds of 1500 to 4500 rpm.     

MHD boundary-layer flow due to a moving extensible surface

The flow due to a moving extensible sheet that obeys a more general stretching law is considered. The sheet occupies the negative x-axis and is moving continually in the positive x-direction, in an incompressible viscous and electrically conducting fluid. The sheet somehow disappears in a sink that is located at (x, y) = (0, 0). The governing system of partial differential equations is first transformed into a system of ordinary differential equations, and the transformed equations are solved numerically using a finite-difference scheme, namely the Keller-box method. The features of the flow and heat-transfer characteristics for different values of the governing parameters are analyzed and discussed. It is found that dual solutions exist for the flow near x = 0, where the velocity profiles show a reversed flow.     

Electrochemical Formation of Polypyrrole-carboxymethylcellulose Conducting Polymer Composite Films

1.IntroductionConjugated polymers such as polypyrrole(PPY),polyaniline,polythiophene and polyphenylene etc.whichexhibit significant level of electrical conductivity andhence are termed as conducting polymers,have gotversatile promising applications in the field of energystorage[1],sensors[2],electronic and optical devices[3]andso on.Many researches have been conducted to pro-duce composites or blends of conducting polymer filmswith some insulating polymers in order to overcome thedrawbacks su…     

转速对6061-T6铝合金搅拌摩擦搭接焊接头力学性能的影响(英文)

采用场发射扫描电子显微镜(FE-SEM),研究转速对厚度为5 mm的6061-T6铝合金搅拌摩擦搭接焊接头的宏观和微观组织、硬度、搭接头剪切性能和失效模式的影响。结果表明:在最低的转速度下,上模板和下模板具有十分相似的硬度分布。采用EDX分析发现,焊核区的断裂面中含有Fe的化合物。