Effect of ibudilast on microcirculation thrombosis in rat inner ear

Arterial wall thickening may be quantitatively assessed by measuring the intima-media thickness (IMT) with high resolution ultrasound. Previous studies have shown a good inter/intraobserver variability of IMT measurements in the common carotid. In this study we evaluated the inter/intraobserver variability of IMT measurements in 10 randomly selected asymptomatic subjects (age 55.4 +/- 6). Two carotids and two femorals were studied in each subject. IMT for each patient was the average of five IMT measurements at the artery bifurcation. Three observers repeated the scanning and the measurements twice with no knowledge of the previous readings. The between observer coefficient of variation (CV) was 8.45%; the intraobserver CV (mean of carotids and femorals) varied from 4.4 to 5.1% for the three observers who measured IMT three times. The mean absolute difference between the first and the third measurement was 0.0738 mm. In conclusion IMT measurement variability is mostly due to differences between observers. The intraobserver variability is very small. IMT measurements at the carotid and femoral bifurcations have a low variability and are a good expression of atherosclerosis as they consider early lesions at the bifurcation level which may not be observed in the common carotid.     

Antibacterial actin of vinegar against food-borne pathogenic bacteria including Escherichia coli O157:H7 (Part 2). Effect of sodium chloride and temperature on bactericidal activity

Bactericidal effects of various kinds of AWASEZU (processed vinegar, 2.5% acidity) on food-borne pathogenic bacteria including Escherichia coli O157:H7 and other bacteria were examined. the order of bactericidal activities was NIHAIZU (3.5% NaCl was added) > SANBA-IZU (3.5% NaCl and 10% sucrose were added) > plain vinegar (spirit vinegar) > AMAZU (10% sucrose was added). This indicates that their activities were enhanced by the addition of sodium chloride and suppressed by the addition of sugar. On the other hand, when soy sauce was used instead of sodium chloride, the order of bactericidal activities was plain vinegar > AMAZU > NIHAIZU > SANBAIZU. This is mainly because their activities were suppressed by the increase in the pH value. The effect of sodium chloride (0.01-15%) and temperature (10-50 degrees C) on bactericidal activities against E. coli O157:H7 in spirit vinegar (0.5-2.5% acidity) was further examined. When vinegar was used in combination with sodium chloride, predominant synergism on the bactericidal activity was observed. Their activities were markedly enhanced by the addition of sodium chloride in proportion to the concentration. In addition to this, at higher temperatures spirit vinegar killed bacteria much more rapidly. It should be noted that the bactericidal activity of spirit vinegar was extremely enhanced by the combined use of the addition of sodium chloride and the rise of temperature. For example, in 2.5% acidity vinegar, the time required for 3 log decrease in viable cell numbers at 20 degrees C was shortened to 1/140-fold by the addition of 5% sodium chloride, shortened to 1/51-fold by the rise of the reaction temperature at 40 degrees C, and shortened to 1/830-fold; 0.89 minutes by both the addition of 5% sodium chloride and the rise of temperature at 40 degrees C. In order to propose the methods to prevent food poisoning by bacterial infection, bactericidal activities of vinegar solution containing sodium chloride on cooking tools and raw vegetables were examined. Vinegar solution (1-2% acidity, 3-7% NaCl) produced more than 3 log decrease in viable cell numbers of E. coli O157:H7 on the surface of cutting board, and cabbage and cucumber at 20-50 degrees C. These results suggested that the treatment with vinegar solution containing sodium chloride may be one of the useful methods to prevent food poisoning.     

Relationship between local immune response to Helicobacter pylori and the diversity of disease: investigation of H. pylori-specific IgA in gastric juice

In order to evaluate the relationship between local immune response to Helicobacter pylori and the diversity of disease, 77 asymptomatic subjects who underwent a health examination were studied. Helicobacter pylori-specific IgG in serum and H. pylori-specific IgA in gastric juice were measured by ELISA, and the measured IgA titre was classified into two grades, low or high. Histological classification of gastritis was performed according to the Sydney system. Cytokines in gastric juice were also measured, and the cytotoxin-associated gene A (cagA) status of H. pylori was tested by PCR. Of the 65 subjects who were positive for H. pylori-specific IgG in serum, 38 (58.5%) were classified as H. pylori-specific IgA low titre in gastric juice and 27 (41.5%) had high titres. In the IgG-positive, IgA-low group, the rate of peptic ulcers (especially duodenal ulcers) in endoscopic findings was higher (P < 0.05); the score of activity and the density of H. pylori were higher (P < 0.001 and P < 0.05, respectively); the score of metaplasia was lower (P < 0.05); and the level of interleukin-1 beta was lower (P < 0.05) than in the IgG-positive, IgA-high group. The positive rate of the cagA gene was 84.4% and there was no significant difference between the two groups. There were differences in endoscopic and histological findings between the IgG-positive, IgA-low and the IgG-positive, IgA-high groups. It is suggested that persons infected with H. pylori can be divided into two different states of disease according to local immune response.     

Design optimization of tall tubular lead/acid cells based on an analysis of the reaction distribution

In order to estimate the discharge performance of tall lead/acid cells (with tubular positives), changes in current and potential distributions with discharge progress were calculated with a computer on the basis of plate resistance and the current—potential—time relationship between small facing parts of positive and negative plates. The taller the cell, the larger the voltage drop along the plates. Thus, the discharge time became shorter despite a large amount of available active mass remaining in the bottom part of the plates.Various current-collector designs were evaluated, e.g., one with varying resistance at each height; a side conductor placed along the plates and connected to them at the top, centre and bottom, etc. Results revealed an optimum collector design with which the maximum discharge capacity could be obtained. Furthermore, it was shown that the side conductor markedly improved the discharge performance because the active mass near the connecting parts was appreciably used.     

The heat transfer and pressure drop characteristics of finned tube banks in forced convection (effects of fin height on pressure drop characteristics)

In recent years the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. For example, in the power generation field, as thermal power generation occupied 60% of the power generation demand, considerable improvement of the thermal efficiency is required. This paper describes the pressure drop characteristics of finned tube banks used for heat exchangers in thermal power generation that were clarified by testing serrated finned tube banks with different fin heights for improved heat transfer and conventional spiral finned tube banks with different fin heights, and an equation to predict pressure drop which is necessary for the heat exchanger design is proposed. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(3): 179–193, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20112     

A new voltage control equipment using fuzzy inference

Power system control equipment needs higher sensitivity and operational reliability. Advanced voltage control equipment is needed for reducing the frequency of tap changes and improving the characteristics (the relationship between the actual voltage and reference voltage) of the voltage to meet today's power system requirements. However, these objectives are in a trade-off relationship. Studies of voltage control derived from a knowledge base suitable for electric power systems can satisfy these objectives using fuzzy inference. Compared with corresponding conventional equipment, the new equipment improved the deviation of 30 min average voltage of 30 percent. This paper describes the design concept of new voltage control equipment using fuzzy inference. In addition, field test results are described along with rules of fuzzy inference, membership functions, and the deviation of 30 min average voltage through detailed simulation.     

Discharge behaviour of electrodeposited PbO2 and Pb electrodes

The discharge behaviour of electrodeposited lead dioxide and lead electrodes was investigated under various conditions; the surfaces of the discharged electrodes were observed with a scanning electron microscope. Both the positive and negative electrodes were passivated by a covering of deposited lead sulphate crystals. The amount of lead sulphate required for passivation depended on the size of the crystals.     

Effects of cysteinyl-leukotriene receptor antagonist, thromboxane A2 receptor antagonist, and thromboxane A2 synthetase inhibitor on antigen-induced bronchoconstriction in patients with asthma

BACKGROUND: Leukotriene (LT) and thromboxane A2 (TXA2) receptor antagonists have been used in the treatment of asthma. OBJECTIVES: We examined the effects of an LT receptor antagonist, TXA2 receptor antagonist, and TXA2 synthetase inhibitor on bronchoprovocation test (BPT) in patients with mild-to-moderate atopic asthma. METHODS: BPT was performed four times in each of six asthmatics. Development of the immediate asthmatic reaction (IAR) and late asthmatic reaction (LAR) was confirmed on the first BPT (BPT1). After a 7-day washout period, an LT receptor antagonist (pranlukast, 450 mg/d), TXA2 receptor antagonist (seratrodast, 80 mg/d), or TXA2 synthetase inhibitor (ozagrel, 800 mg/d) was administered orally over 7 days at random using a cross-over method (BPT2-4). Blood levels of LTB4, LTC4, LTD4, 11-dehydrothromboxane B2, eosinophil cationic protein, and histamine were measured at reaction phases of pre-BPT, IAR, and LAR. RESULTS: Administration of pranlukast suppressed IAR by 80.5% (p < 0.0001) and LAR by 54.6% (p = 0.0391). Ozagrel significantly suppressed IAR by 39.5% (p = 0.0413), but the fall in FEV1 was >20% (21.56+/-4.173%). Seratrodast did not suppress IAR or LAR. Blood levels of chemical mediators did not correlate with the suppressive effects of the tested drugs. CONCLUSIONS: The LT receptor antagonist was considered to be the most effective. LT might play a more important role in the pathogenesis of asthma than TXA2. Our data showed that measurement of blood levels of chemical mediators is not useful in identifying the pathogenic mechanisms of asthma.