Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.     

Fabrication of oriented electrospun cellulose nanocrystals–polystyrene composite fibers on a rotating drum

Nitrobenzene (CNC-1), trifluoromethyl benzene (CNC-2) modified and polystyrene-grafted (CNC-g) cellulose nanocrystals in polystyrene (PS)-N,N dimethylformamide (DMF) solutions were electrospun and collected as stretched and aligned fibers on a rotating drum. Scanning electron microscope pictures showed significant alignment in the case of unmodified and nitrobenzene-modified CNC-1/PS nanocomposite fibers once the linear speed of rotor reached to 15 m s⁻¹. Fiber diameter decrease was more strong with rotor speed increase in the case of trifluoromethyl benzene modified (CNC-2) and polystyrene-grafted (CNC-g) cellulose nanocrystals/PS systems. Dynamic mechanical analysis including storage and elastic modulus of electrospun-oriented fibers were performed on surface-modified and polymer-grafted CNC/PS samples. According to α transition peak, the increase in the glass-transition temperature with filler concentration was the highest in polymer-grafted CNC-g/PS composite fibers. It was due to the interpenetration of grafted polymer brushes and free polymer chains in continuous phase and resulted in restrictions of motions of polymer chains in the PS matrix. The elastic moduli of nitrobenzene (CNC-1) and trifluoromethyl benzene (CNC-2)-modified CNC-filled PS composite fibers agreed well with percolation model, which indicates the CNC–CNC interactions and network formation with an increase in concentration. Magnitude of the elastic modulus of polymer grafted CNC-g at 0.33 vol % in PS was significantly higher than the prediction from percolation theory. It was due the immobilized polymer chains around CNC-g particles. However, grafted polymer chains, at higher CNC concentrations acted like stickers among CNC particles and caused CNC agglomerates with entrapped free polystyrene from the matrix, thus caused a decrease in the elastic modulus. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48942.     

Novel link adaptation for TETRA cellular systems

One of the main challenges for future wireless systems is to enhance the effective data throughput by exploiting the allocated bandwidth as much as possible. Among several approaches at different layers, one of the most important is constituted by the so‐called link adaptation (LA) techniques. They are characterized by the adaptation of a set of transmission parameters to the channel state in order to improve performance. In this context, this paper is focused on the analysis of a particular class of LA techniques called adaptive modulation and coding, where the modulation and coding rate of transmission can vary according to the channel behavior. In particular, a novel LA algorithm, namely the timed window (TW) method, suitable for time‐division Duplex systems is proposed here. The performance of the TW algorithm is evaluated by taking actual user mobility conditions, communication channel behavior, as well as the physical layer effects into account. Finally, it is important to stress that, even if the wireless bearer considered in this study is TETRA (TErrestrial Trunked RAdio), the approach is quite general and it can be of interest for other wireless networks and can be optimized for different channel models (e.g. TU50, HT200, etc.). Copyright © 2008 John Wiley & Sons, Ltd.     

Engineering of the Fluorescent‐Energy‐Conversion Arm of Phi29 DNA Packaging Motor for Single‐Molecule Studies

The bacteriophage phi29 DNA packaging motor contains a protein core with a central channel comprising twelve copies of re‐engineered gp10 protein geared by six copies of packaging RNA (pRNA) and a DNA packaging protein gp16 with unknown copies. Incorporation of this nanomotor into a nanodevice would be beneficial for many applications. To this end, extension and modification of the motor components are necessary for the linkage of this motor to other nanomachines. Here the re‐engineering of the motor DNA packaging protein gp16 by extending its length and doubling its size using a fusion protein technique is reported. The modified motor integrated with the eGFP‐gp16 maintains the ability to convert the chemical energy from adenosine triphosphate (ATP) hydrolysis to mechanical motion and package DNA. The resulting DNA‐filled capsid is subsequently converted into an infectious virion. The extended part of the gp16 arm is a fluorescent protein eGFP, which serves as a marker for tracking the motor in single‐molecule studies. The activity of the re‐engineered motor with eGFP‐gp16 is also observed directly with a bright‐field microscope via its ability to transport a 2‐µm‐sized cargo bound to the DNA.     

Study of the Free Surface Flow on an Ogee-Crested Fish Bypass

A study of the free surface flow on an ogee-crested fish bypass is presented. The commercial computational fluid dynamics (CFD) code Fluent 6.1 was used to perform the simulations. Structured/unstructured hybrid grids were used to accommodate the complex geometry that included gate slots, flow control gates, and an aeration slot. The volume of fluid (VOF) approach was used to model the water/air interface. The fish bypass exhibits complex free surface features including free nappes and air entrainment from the air slots. Free surface elevations on both sides of the nappe, pressure along the ogee surface, and discharge rating curves were compared against 1:24 experimental data from the laboratory model for different headwater elevations and gate settings. Limited comparison against measured velocities was also performed. Once deemed reliable through validation against experimental data, the computational model was used to analyze the flow field, supplementing the areas of limited experimental data. Though the paper presents the final fish bypass design, CFD was used to guide the design process and provide insight for several variations in the geometry.     

Empirical Correlations for Estimating Filtrate Volume of Water Based Drilling Fluids

Standard American Petroleum Institute (API) filter press is generally used for identifying the filtrate volume of drilling fluids and works only at very low pressures. In fact, during a drilling operation, at downhole conditions, the pressures encountered are significantly higher than what is used during standard API filter press tests. A relationship between the well-known fluid properties and the filtrate volume test is developed. In this study, experiments have been conducted for different water-clay mixtures with varying concentrations at different pressure values by using standard API filter press and HP&HT (high-pressure high-temperature) filter press. The relationship between physical and chemical properties of water-clay mixtures and filtrate volume is analyzed. An empirical correlation has been developed for estimating filtrate volume using basic information of the mud (i.e., rotational viscometer readings, density, pressure, cation exchange capacity, and chemical composition). The developed correlation can estimate filtrate volume with an error less than 20% for a wide range of pressure values.     

Computational Markets to Regulate Mobile-Agent Systems

Mobile-agent systems allow applications to distribute their resource consumption across the network. By prioritizing applications and publishing the cost of actions, it is possible for applications to achieve faster performance than in an environment where resources are evenly shared. We enforce the costs of actions through markets, where user applications bid for computation from host machines.We represent applications as collections of mobile agents and introduce a distributed mechanism for allocating general computational priority to mobile agents. We derive a bidding strategy for an agent that plans expenditures given a budget, and a series of tasks to complete. We also show that a unique Nash equilibrium exists between the agents under our allocation policy. We present simulation results to show that the use of our resource-allocation mechanism and expenditure-planning algorithm results in shorter mean job completion times compared to traditional mobile-agent resource allocation. We also observe that our resource-allocation policy adapts favorably to allocate overloaded resources to higher priority agents, and that agents are able to effectively plan expenditures, even when faced with network delay and job-size estimation error.     

Effects of Recycling on the Mechanical Behavior of Polypropylene at Room Temperature Through Statistical Analysis Method

This article reports the effects of recycled material percentage, annealing conditions, and glass fiber percentage on the mechanical behavior of injection molded polypropylene samples. Specimens were prepared with different percentages of recycled material ranging from 0 to 100%. Two groups of samples, i.e., non‐annealed and annealed at 150°C, were tested to investigate annealing effects. The effects of adding fiber (0–7.5%) to specimens was also investigated. It was found that increasing the amount of recycled material improves the material properties in a non‐linear trend. Annealing had a significant positive effect on both non‐fiber‐added and fiber‐added samples: it improved the yield stress of non‐reinforced polypropylene samples by more than 10% and their Young's modulus by about 50%. Fiber‐added materials showed more variability, and adding fiber also improved the Young's modulus and the yield stress of the samples by about 50%. The results indicate that the three factors investigated improved toughness of the injected polypropylene samples; however the effects are not significant. The study findings reveal that using recycled polypropylene has no significant effect on the material properties of polypropylene. POLYM. ENG. SCI., 56:1283–1290, 2016 © 2016 Society of Plastics Engineers