天然黏土矿物在靛蓝染色废水电絮凝中的应用

为提高靛蓝染色废水电絮凝处理效率,以天然黏土矿物为协同吸附剂,采用电絮凝-吸附联合工艺处理靛蓝染色废水。探究黏土类型对絮体沉降速率和Zeta电位的影响,通过废水色度、浊度、脱色率和化学需氧量(COD)去除率评价絮凝处理效果。确定最佳黏土矿物种类并结合絮体显微观察,进一步分析黏土矿物与电絮凝的协同作用机制。结果表明:黏土矿物加入可降低Zeta电位绝对值;硅藻土与电絮凝协同的主要絮凝机制为网捕卷扫,同时兼具一定的电荷中和与吸附架桥作用;电絮凝反应结束后,仅需加入1 g/L硅藻土反应3 min,Zeta电位绝对值可达到最低,为15.585 mV,废水脱色率提升至94.08%。     

地下连续墙设计优化及施工实践

相较于普通的围护结构,"两墙合一"地下连续墙具有更好的整体性和刚度,但其对施工工艺提出了更高的要求.结合工程实践,总结介绍了地下连续墙施工中的接驳器优化、钢筋笼吊点设置、槽壁加固、跳仓施工等关键技术措施,可为"两墙合一"地下连续墙的设计优化以及施工提供参考.     

Using deep learning to combine static and dynamic power analyses of cryptographic circuits

Side-channel attacks have shown to be efficient tools in breaking cryptographic hardware. Many conventional algorithms have been proposed to perform side-channel attacks exploiting the dynamic power leakage. In recent years, with the development of processing technology, static power has emerged as a new potential source for side-channel leakage. Both types of power leakage have their advantages and disadvantages. In this work, we propose to use the deep neural network technique to combine the benefits of both static and dynamic power. This approach replaces the classifier in template attacks with our proposed long short-term memory network schemes. Hence, instead of deriving a specific probability density model for one particular type of power leakage, we gain the ability of combining different leakage sources using a structural algorithm. In this paper, we propose three schemes to combine the static and dynamic power leakage. The performance of these schemes is compared using simulated test circuits designed with a 45-nm library.     

Effect of carbon nanotubes grown temperature on the fracture behavior of carbon fiber reinforced magnesium matrix composites: Interlaminar shear strength and tensile strength

The design of an interfacial structure is particularly important for load transfer in composites. In this paper, different amounts of carbon nanotubes (CNTs) were grafted onto the carbon fiber (CF) surface by adjusting grown temperature using injection chemical vapor deposition (ICVD). The prepared CF preform grafted with CNTs (CNTs-CF) were used to reinforce magnesium alloy by squeeze casting process. The microstructures were analyzed by means of optical microscope (OM) and scanning electron microscope (SEM), and the interlaminar shear strength (ILSS) and tensile strength of the composites were determined by double-notch shear test and tensile test. The results indicated that moderate ILSS was more conducive to improving the tensile properties of carbon fiber reinforced magnesium matrix (C_f/Mg) composites. Compared with C_f/Mg, the tensile strength of composite with CNTs increased by about 80%. For C_f/Mg composites grafted with CNTs, CNTs had the effects of delaying crack propagation and increasing energy consumption by the pull-out and bridging mechanism, which were the main reasons for improving the strength. The analysis of shear fracture surface showed that the crack propagation path can be optimized by adjusting the amounts of grafted CNTs. The presence of CNTs affects the stress distribution and consequently the crack initiation as well as the crack propagation.     

橡木桶陈酿对红葡萄酒抗氧化性的影响

采用2,2'-联氮-双-3-乙基苯并噻唑啉-6-磺酸（ABTS）方法动态监测经橡木桶陈酿和未经橡木桶陈酿的红葡萄酒的反应过程，比较在测定其抗氧化活性的反应条件上的差异，从而确定适合检测的最佳反应条件，并分析橡木桶陈酿对红葡萄酒中酚类物质含量和抗氧化活性的影响。结果表明，ABTS方法测定经橡木桶陈酿的红葡萄酒抗氧化活性的最佳反应时间范围是240～280 min，最佳稀释比例范围为1∶100～2∶100，未经橡木桶陈酿的最佳反应时间范围是220～260 min，最佳稀释比例范围是3∶100～4∶100，此条件下各因素与自由基清除率的线性关系R2均＞0.999。试验证明，采用合适的检测方法测定不同陈酿方式酒的抗氧化活性有利于提高检测效率和准确性，经橡木桶陈酿过的红葡萄酒中的酚类物质含量和抗氧化活性更高。     

Thermal conductivity and mechanical properties of polyimide composites with mixed fillers of BN flakes and SiC@SiO2 whiskers

Polyimide (PI) composites with mixed fillers of BN flakes and SiC whiskers exhibit enhanced thermal conductivity and mechanical properties. In order to improve dispersion and interaction of these mixed fillers within the PI matrix, BN flakes were modified by a titanate coupling agent while SiC whiskers were oxidized at 750°C for 60 minutes to produce SiC@SiO₂ followed by silane coupling agent modification. PI composites reached a maximum thermal conductivity of 0.95 W/m K at volume fraction of mixed fillers of 27.6 vol% when the weight ratio of BN flakes to SiC@SiO₂ whiskers was 1:4. The enhanced thermal conductivity is likely attributed to the formation of heat conductive networks constructed by BN flakes and SiC@SiO₂ whiskers and the improved interfacial affinity between fillers and matrix. The optimized Nielsen-mold confirms the distribution and morphology of fillers affect the thermal conductivity of PI composites. In addition, SiC whiskers enhanced the mechanical property of PI composites and the influence of fillers on the mechanical property was further elaborated.     

球头铣刀铣削球面的表面形貌建模与仿真研究

基于齐次坐标矩阵变换原理和矢量运算法则，建立了工件坐标系下球头铣刀扫掠面的数学模型，基于Z-MAP法设计了球形表面形貌的生成算法，利用该算法对球头铣刀分别采用3D环绕法和放射加工法这两种典型走刀路线加工凸球面，并对加工后的表面形貌进行了仿真，通过分析对比仿真结果，发现3D环绕法更有利于减小表面粗糙度。同时，仿真结果和试验结果具有较高的吻合度，表明该仿真方法是可靠的，可以用于实际生产中球头铣刀铣削球面表面形貌的预测。     

曝气装置结构对多孔板鼓泡特性的影响

气泡体积是决定鼓泡式过滤器性能的重要参数，当使用多孔板作为曝气装置时，孔板结构和气腔状态会对生成气泡体积产生影响。本文采用可视化方法实验研究孔板结构、气腔状态对多孔板鼓泡特性的影响规律。结果表明，气腔无水状态下多孔板鼓泡效果更好；使用有效鼓泡时间能很好地表征多孔板的鼓泡性能；仅当气体流量处于0.35～0.7 L/min、孔间距小于6 mm时，孔间距对多孔板鼓泡性能产生影响；多孔板孔数的确定应保证生成的气泡体积处于气腔控制区。     

Chloroform Hydrodechlorination on Palladium Surfaces: A Comparative DFT Study on Pd(111), Pd(100), and Pd(211)

Topics in Catalysis - Palladium has been shown to be an effective catalyst for chloroform hydrodechlorination, which serves as a promising treatment method for industrial chloroform waste. To...     

Cerebral microbleeds and cognitive decline in a hemodialysis patient: Case report and review of literature

Cerebral microbleeds (CMBs) are small hemosiderin deposits indicative of prior cerebral microscopic hemorrhage and previously thought to be clinically silent. Recent population‐based cross‐sectional studies and prospective longitudinal cohort studies have revealed association between CMB and cognitive dysfunction. In the general population, CMBs are associated with age, hypertension, and cerebral amyloid angiopathy. In the chronic kidney disease (CKD) population, diminished estimated glomerular filtration rate has been found to be an independent risk factor for CMB, raising the possibility that a uremic milieu may predispose to microbleeds. In the end‐stage renal disease (ESRD) population on hemodialysis, the incidence of microbleeds is significantly higher compared with a control group without history of CKD or stroke. We present an ESRD patient on chronic hemodialysis with a history of gradual cognitive decline and progressive CMBs. Through this case and literature review, we illustrate the need to develop detection and prediction models to treat this frequent development in ESRD patients.