Synthesis,characterization and adsorption studies of h-BN crystal for efficient removal of Cd2+ from aqueous solution

In the present study, hexagonal boron nitride (h-BN) was synthesized from boric acid and melamine by thermal annealing method in a nitrogen atmosphere. The pure h-BN was used as an efficient sorbent for the uptake of Cd²⁺ ions from the solution phase. The kinetics and sorption studies of metal ions onto the h-BN were carried out in batch adsorption experiments at different temperature, time, pH, sorbent dosage, and concentration of metal ions. The optimum pH for the removal of the Cd²⁺ ions was found to be pH 7. The effect of temperature showed that the process of Cd²⁺ sorption remained endothermic in the range of 298 K–328 K. The Lagergren's first and Ho's second kinetic models were tested to interpret the adsorption kinetic data, however the present data was explained well by Ho's model for kinetics. The thermodynamic perameters ΔG, ΔS and ΔH were determined using the available adsorption data at different temperatures. The physicochemical properties of the synthesized product were also characterized before and after adsorption by different analytical techniques like FT-IR, TGA, XRD and Point of Zero Charge (PZC). The morphology of the surface was analyzed with the help of Scanning Electron Microscopy. The h-BN proved to be an efficient adsorbent for the uptake of the Cd²⁺ ions from aqueous media.     

Device Performance Optimization of Organic Thin-Film Transistors at Short-Channel Lengths Using Vertical Channel Engineering Techniques

Semiconductors - This paper presents a finite-element-based two-dimensional numerical simulation study of the vertical channel engineering approaches for controlling the short-channel effects...     

The microstructure of buccal cavity and alimentary canal of Siganus rivulatus: Scanning electron microscope study

The microstructure of the oral cavity and alimentary canal of herbivorous fish Siganus rivulatus collected from the Red Sea were investigated by using scanning electron microscope (SEM). The results showed that S. rivulatus has three types of teeth, tri‐cusped, bi‐cusped, and papilliform. A taste bud (Type I) was recorded in the oropharyngeal cavity. Characteristic styles of microridges on the cell's surface inside the buccal cavity were recorded. Also, the distribution of the mucous cells in the lining of the mouth cavity, alimentary canal was observed. Mucosal folds along the distinct parts of alimentary canal, showed characteristic pattern which was complex in the intestinal mucosa. The results concluded that there are characteristic microstructures according to feeding habitat compared with other bony fishes.     

Studies on batch adsorptive removal of cadmium and nickel from synthetic waste water using silty clay originated from Balochistan–Pakistan

The potentials of silty clay(SC), acquired from Chaman, Balochistan, were investigated as adsorbent for Ni(Ⅱ)and Cd(Ⅱ) removal from contaminated media. The influence of different operating factors like dose, pH, temperature, and time of contact was explored, and optimum values were noted under batch adsorption method. Isothermal study was conducted with varying concentrations of solutions on optimized conditions and different adsorption models i.e., Langmuir, Freundlich, Temkin and Dubinin–Radushkevich(D–R) isotherm, which were employed to interpret the process. The isothermal data of both Ni(Ⅱ) and Cd(Ⅱ) were well fitted to Langmuir isotherm suggesting the formation of monolayer of metal ions on silty clay. The values of adsorption capacity noted for Ni(Ⅱ) and Cd(Ⅱ) were 3.603 mg·g~(-1) and 5.480 mg·g~(-)1, respectively. Kinetic studies affirmed that pseudo second order(PSO) kinetics was being obeyed by the removal of Ni(Ⅱ) and Cd(Ⅱ). Thermodynamic variables like free energy change(ΔG°), enthalpy change(ΔH°) and entropy change(ΔS°) were calculated. The negative value of ΔG° and the positive values of ΔH° and ΔS° unfolded that the removal process of both metal ions of by SC was spontaneous, endothermic and feasible.     

Determination of 210Po in various foodstuffs and its annual effective dose to inhabitants of Qena City, Egypt

The concentration of ²¹⁰Po was determined in different foodstuffs of plant origin purchased from markets in Qena City, Upper Egypt. Measurement of ²¹⁰Po has been carried out using alpha spectrometry technique in different food categories such as vegetables, fruits, cereals beverages and herbs. The general range of ²¹⁰Po activity levels ranged widely from < 0.010-18.6 ± 0.910 mBq g^− 1, with minimum being in cereal samples and maximum being in beverage samples. Tea samples recorded highest activity concentrations of ²¹⁰Po with lowest value of 10 ± 0.54 mBq g⁻¹ for Crown tea and highest value of 18.6 ± 0.910 mBq g⁻¹ for El maabad tea. The daily intake of ²¹⁰Po from food consumption reveals that vegetables are the biggest contributors, while beverages are the lowest. The effective ingestion dose has been estimated for Qena City residents and it was found in the range 0.008-38.3 μSv y⁻¹.     

The effects of discontinuity surface roughness on the shear strength of weathered granite joints

Surface roughness is one of the most important parameters governing the shear strength of rock discontinuities. Roughness types may vary based on genesis, physico-mechanical, and mineralogical properties of rocks. In this study, granite samples representing three different weathering degrees were selected to evaluate the effects of surface roughness and weathering degree on shear strength. To this aim, we determined the profile roughness coefficient (PRC), profile roughness angle (PRA), and joint roughness coefficient (JRC) for the selected fresh and weathered granite joint samples. Values of PRC were in the range of about 1.043–1.073, and PRA and JRC varied in the ranges of 16.67–21.45 and 12–18, respectively. Weathering led to the increment of joint surface roughness of the selected granitic joints due to the higher resistance of quartz crystals in the weathered matrix. However, the increment in surface roughness did not result in an increase in the shear strength. On the contrary, the shear strength of discontinuities dramatically decreased.     

Using next generation nuclear power reactors for development of a techno‐economic model for hydrogen production

Nuclear and hydrogen are considered to be the most promising alternatives energy sources in terms of meeting future demand and providing a CO?‐free environment, and interest in the development of more cost‐effective hydrogen production plants is increasing—and nuclear‐powered hydrogen generation plants may be a viable alternative. This paper is a report on investigating the application of new generation nuclear power plants to hydrogen production and development of an associated techno‐economic model. In this paper, theoretical and computational assessments of generations II, III+, and IV nuclear power plants for hydrogen generation scenarios have been reported. Technical analyses were conducted on each reactor type—in terms of the design standard, fuel specification, overnight capital cost, and hydrogen generation. In addition, a theoretical model was developed for calculating various hydrogen generation parameters, and it was then extended to include an economic assessment of nuclear power plant‐based hydrogen generation. The Hydrogen Economic Evaluation Program originally developed by the International Atomic Energy Agency was used for calculating various parameters, including hydrogen production and storage costs, as well as equity, operation and maintenance (O&M), and capital costs. The results from each nuclear reactor type were compared against reactor parameters, and the ideal candidate reactor was identified. The simulation results also verified theoretically proven results. The main objective of the research was to conduct a prequalification assessment for a cogeneration plant, by developing a model that could be used for technical and economic analysis of nuclear hydrogen plant options. It was assessed that high‐temperature gas‐cooled reactors (HTGR‐PM and PBR200) represented the most economical and viable plant options for hydrogen production. This research has helped identify the way forward for the development of a commercially viable, nuclear power‐driven, hydrogen generation plant.