Analytical Modeling of Surface Potential and Drain Current of Hetero-Dielectric DG TFET and Its Analog and Radio-Frequency Performance Evaluation

Semiconductors - In the present paper, analytical modeling of surface potential and drain current for hetero-dielectric double gate tunnel FET (HDG-TFET) has been done. The two dimensional (2D)...     

Length–weight relationships of five catfish species (Siluriformes) from the Ganga River,India

Knowledge of the length–weight relationships (LWRs) of fish is an important tool to understand fish body form, growth pattern, stock management and their conservation. The present study focused on investigating the length–weight relationships for five catfish species, Pachypterus atherinoides (Bloch, 1794), belonging to family Horabagridae; Batasio batasio (Hamilton, 1822) family Bagridae; Bagarius yarrelli (Sykes, 1839), family Gogangra viridescens (Hamilton, 1822); and Sisor rhabdophorus (Hamilton, 1822) belonging to family Sisoridae. Specimens were collected from the middle stretch of the Ganga River in India from November 2016 to May 2018. A total of 174 specimens of five fish species were collected, and their total lengths were measured to the nearest centimetre and the body weight to the nearest gram. The value of the parameter slope (b) of LWRs of the five species ranged from 2.86 (B. yarrelli) to 3.16 (G. viridescens), with a mean value of 2.99. The results of the present study documented the new maximum total length (TL) for P. atherinoides and S. rhabdophorus. The present study also provides the first reference regarding LWRs for S. rhabdophorus.     

A multi-tier based clustering framework for scalable and energy efficient WSN-assisted IoT network

Wireless Networks - The effectiveness of wireless sensor network (WSN) in Internet of Thing (IoT) based large scale application depends on the deployment method along with the routing protocol. The...     

Lab scale optimization of various factors for photocatalytic hydrogen generation over low cost Cu0.02Ti0.98O2-δ photocatalyst under UV/Visible irradiation and sunlight

We have demonstrated earlier that maximum H₂ generated @ 1.167 l/h/m² over Cu_0.02Ti_0.98O_2-δ photocatalyst with apparent quantum efficiency, AQE of 7.5% and solar fuel efficiency, SFE of 3.9% under sunlight. With an aim to scale-up the solar photocatalytic hydrogen process to pilot plant, optimization studies at lab scale as well as in upscaled photoreactors were performed over Cu_0.02Ti_0.98O_2-δ, photocatalyst under UV/visible and sunlight. Cu_0.02Ti_0.98O_2-δ was synthesized by facile sol-gel route and characterized by relevant techniques. Several operational parameters were investigated in order to finalize the conditions which are most favourable for photocatalytic hydrogen yield. Factors such as photocatalyst loadings, v/v concentration of sacrificial reagent, replacement of methanol by industrial waste glycerol, role of different configuration of light source with reactor, effect of stirring during the photocatalytic reaction, effect of fluctuations of solar flux at hourly basis, illumination area on hydrogen yield were studied. Contribution of each factor in determining the hydrogen yield was quantified. Relative standard deviation in hydrogen yield as a function of each factor was estimated. Our findings suggest that in addition to catalyst loadings and sacrificial reagent, improved dispersion of photocatalyst obtained by stirring the reaction mixture in horizontal geometry resulted in enhanced H₂ yield. Hydrogen yield obtained at lab scale can be appropriately extrapolated with respect to illumination area instead of weight of photocatalyst. A relative standard deviation (RSD) of ± 3.82% and ± 4.53% in H₂ yield was calculated for sunny and cloudy days in time zone of 10.30–16.30 h IST. Deviation of H₂ yield was more on cloudy days and beyond 16:30 h. These studies have provided a daily window of 11:00–15:00 h to be utilized throughout the year for a commercial scaled up process, prohibiting the illumination during less productive hours of the day for shaping the improved economics of solar hydrogen generation. Our results obtained at lab scale would be useful to perform sunlight driven scaled –up photocatalytic process using low cost visible light efficient photocatalyst, Cu_0.02Ti_0.98O_2-δ.     

Catalytic properties of dispersed iron oxides Fe2O3/MO2 (M = Zr,Ce, Ti and Si) for sulfuric acid decomposition reaction: Role of support

Supported iron oxides have been established as an important class of catalyst for high temperature sulfuric acid decomposition. With an objective to elucidate the role of support in modifying the overall catalytic properties of dispersed iron oxide catalysts, a series of supported iron oxide based catalysts, Fe₂O₃ (15 wt%)/MO₂ (M = Zr, Ce, Ti and Si), synthesized by adsorption-equilibrium method, is investigated for sulfuric acid decomposition reaction. The structure of dispersed iron oxide phases largely depended on the nature of the support oxide as revealed by the XRD and Mössbauer studies. α-Fe₂O₃ is found to be present as a major phase on ZrO₂ and CeO₂ support while ε-Fe₂O₃ was the major phase on silica supported iron oxide. On the other hand, presence of mixed oxide Fe₂TiO₅ was revealed over TiO₂ support. Strong dispersed metal oxide-support interactions inhibited the total reduction of the dispersed phase on SiO₂ and TiO₂ as compared to complete reduction of dispersed iron oxide on CeO₂ and ZrO₂ supports during temperature programmed reduction upto 1000 °C. The order of catalytic activity at a temperature of ～750 °C is observed as Fe₂O₃/SiO₂ > Fe₂TiO₅/TiO₂ > Fe₂O₃/ZrO₂ > Fe₂O₃/CeO₂, while at higher temperatures of ～900 °C the SO₂ yield is found to be comparable for all catalysts. A relationship between the rate of sulfate decomposition and catalytic activity is established through detailed TG-DTA investigations of sulfated catalyst and support. Considerable influence of the support oxide on the composition, structure, redox properties, morphology and catalytic activities of the active iron oxide dispersed phase has been observed. Thus, the support oxides operate as a critical component in the complex supported metal oxide catalysts and these findings might influence the design and development of future high temperature sulfuric acid decomposition catalysts.     

Design and analysis of an aging‐aware energy management system for islanded grids using mixed‐integer quadratic programming

The rapid increase of renewable energy sources made coordinated control of the distributed and intermittent generation units a more demanded task. Matching demand and supply is particularly challenging in islanded microgrids. In this study, we have demonstrated a mixed‐integer quadratic programming (MIQP) method to achieve efficient use of sources within an islanded microgrid. A unique objective function involving fuel consumption of diesel generator, degradation in a lithium‐ion battery energy storage system, carbon emissions, load shifting, and curtailment of the renewable sources is constructed, and an optimal operating point is pursued using the MIQP approach. A systematic and extensive methodology for building the objective function is given in a sequential and explicit manner with an emphasis on a novel model‐based battery aging formulation. Performance of the designed system and a sensitivity analysis of resulting battery dispatch, diesel generator usage, and storage aging against a range of optimization parameters are presented by considering real‐world specifications of the Semakau Island, an island in the vicinity of Singapore.     

A bi-objective task scheduling approach in fog computing using hybrid fireworks algorithm

The Journal of Supercomputing - With the rapid increase in the functionality of IoT applications, the services provided by edge/IoT devices have surged in the recent past. Fog computing is gaining...     

Enhanced granulation by natural ionic polymer additives in UASB reactor treating low-strength wastewater

Effect of natural ionic polymer additives on granulation in lab-scale UASB reactors treating low-strength synthetic wastewater (COD 750-850 mg/L) was examined. The organic loading rate was 1.477+/-0.118 kgCOD/m3/day. Under identical conditions four similar reactors were operated in parallel with the following additives: control with no additive, anionic part of Reetha (Sapindus trifoliata) extract, cationic part of Reetha extract, and Chitosan. By the end of the study period, Chitosan as an additive produced largest granules with mean size of 0.15 mm closely followed by the cationic fraction of the Reetha extract with mean size of 0.144 mm, and anionic fractions of the Reetha extract with 0.139 mm. Control reactor with no additives had the smallest size granules with mean size of 0.128 mm. The fraction of granules in the sludge bed of size >0.1 mm showed similar trend. The largest granule size observed in the reactors with additives was 4-5mm as compared to 2 mm in the control reactor. Cationic polymers were more effective additives for enhancing sludge granulation. Exo-cellular protein, lipid, sugar and total polymer increased with granulation in the reactors. A COD removal efficiency of 95-98% was achieved in all the reactors.     

Heavy metals in maternal and cord blood

Heavy metal concentrations have been determined in maternal and cord blood samples collected from mothers in the age group 20-25 years with full-term neonates (37-40 weeks). The concentrations of Pb, Cd, Cu and Zn were found to be low in cord blood as compared to mother's blood and the ratio between cord blood and maternal blood for the respective elements was found to be approximately 0.80, 0.86, 0.47 and 0.40. On the other hand, the concentrations of Fe and Mg in the mother's blood were found to be lower than those in the cord blood. Prenatal exposure to lead in Mumbai, though low (5.1 microg/dl), is approximately 2-3 times higher than that observed in Canada or Italy. A strong correlation (r = 0.79) between the maternal and cord blood lead levels has been observed during the present study.