Piezoelectricity of the Transmembrane Protein ba3 Cytochrome c Oxidase

Controlling the electromechanical response of piezoelectric biological structures including tissues, peptides, and amino acids provides new applications for biocompatible, sustainable materials in electronics and medicine. Here, the piezoelectric effect is revealed in another class of biological materials, with robust longitudinal and shear piezoelectricity measured in single crystals of the transmembrane protein ba₃ cytochrome c oxidase from Thermus thermophilus. The experimental findings from piezoresponse force microscopy are substantiated using a range of control measurements and molecular models. The observed longitudinal and shear piezoelectric responses of ≈ 2 and 8 pm V⁻¹, respectively, are comparable to or exceed the performance of commonly used inorganic piezoelectric materials including quartz, aluminum nitride, and zinc oxide. This suggests that transmembrane proteins may provide, in addition to physiological energy transduction, technologically useful piezoelectric material derived entirely from nature. Membrane proteins could extend the range of rationally designed biopiezoelectric materials far beyond the minimalistic peptide motifs currently used in miniaturized energy harvesters, and the finding of robust piezoelectric response in a transmembrane protein also raises fundamental questions regarding the molecular evolution, activation, and role of regulatory proteins in the cellular nanomachinery, indicating that piezoelectricity might be important for fundamental physiological processes.     

Unusual Two-Step Assembly of a Minimalistic Dipeptide-Based Functional Hypergelator

Self-assembled peptide hydrogels represent the realization of peptide nanotechnology into biomedical products. There is a continuous quest to identify the simplest building blocks and optimize their critical gelation concentration (CGC). Herein, a minimalistic, de novo dipeptide, Fmoc-Lys(Fmoc)-Asp, as an hydrogelator with the lowest CGC ever reported, almost fourfold lower as compared to that of a large hexadecapeptide previously described, is reported. The dipeptide self-assembles through an unusual and unprecedented two-step process as elucidated by solid-state NMR and molecular dynamics simulation. The hydrogel is cytocompatible and supports 2D/3D cell growth. Conductive composite gels composed of Fmoc-Lys(Fmoc)-Asp and a conductive polymer exhibit excellent DNA binding. Fmoc-Lys(Fmoc)-Asp exhibits the lowest CGC and highest mechanical properties when compared to a library of dipeptide analogues, thus validating the uniqueness of the molecular design which confers useful properties for various potential applications.     

Catalytic Formation of C−N Bonds: ICS Symposium Honoring Wolf Prize Laureates Stephen L. Buchwald and John F. Hartwig: May 29, 2019, Technion-Israel Institute of Technology,Haifa, Israel

This report covers two exciting events in the scientific landscape of the State of Israel: the traditional Wolf Prize Symposium of the ICS and the Wolf Prize Ceremony in the Knesset. The symposium, dedicated to the science of Stephen L. Buchwald and John F. Hartwig, highlighted the catalytic formation of C−N bonds. In a general sense, the two Wolf Prize laureates may be considered as molecular architects who produced efficient molecular-scale machines that make important molecules for the benefit of humanity. After receiving the Wolf Prize from Israel's President, Buchwald commented, “There are many who believe that support for research should focus exclusively on endeavors that have specific practical applications in mind. With this mindset, our work would have never been possible. Time and time again experience shows that it is exceedingly difficult to predict which scientific discoveries will lead to major advances. So often, it is the scientist following his or her own intellectual curiosity whose work leads to a breakthrough. I believe that basic curiosity-driven research and societal and economic progress are inextricably linked.” And Hartwig comments, “We all know the principles of science know no boundaries, but maybe less appreciated, or taken for granted, is that the assembly of research teams in many places knows no boundaries. If we recognize and nurture talent in people from all corners and all backgrounds we can address and maybe solve today's most important problems in health, energy, and environmental sustainability that are urgently facing us.”     

The effect of polyethylene crystallinity and polarity on thermal stability and controlled release of essential oils in antimicrobial films

Antimicrobial packaging can preserve and increase shelf life of free preservatives food products. Active materials present in the packaging material can migrate, in a controlled manner, to the food surface, avoiding bacterial and fungal proliferation and keeping the food product edible for longer periods of time. Essential oils (EO) are natural antimicrobial agents that can be released to the headspace with no direct contact between the package and the food. To minimize loses of EO during high heat melt processing, a three stages process was implemented and tested. Antimicrobial films were prepared by melt mixing a variety of polyethylene copolymers in the presence of organo‐modified montmorillonite nano clay (NC) and thymol, an EO present in oregano and thyme. A controlled EO desorption from films can be achieved by changing the polymer crystallinity and polarity. As the crystallinity increased, the thermal stability of the EO during the extrusion process improved. The addition of NC affects the structure and homogeneity of the crystals. The combination of high polymer crystallinity and chemical affinity between EO and NC increased the thermal stability of the EO during film processing, enabling to control the desorption rate. The effect of multilayer structure based on varied densities and polarities was also studied. Increasing the polarity of the outer layers in multilayered film reduced the EO desorption rate as a result of chemical interactions between the polymer and the EO. The final antimicrobial activity of the films was also found to be dependent on the EO partitioning. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40309.     

Effectiveness evaluation of simulative workshops for newly licensed drivers

The current study set to examine the effects of simulator use in driving instruction on newly licensed drivers, comparing the road safety knowledge and reported intended behavior, as well as the actual driving performance of new drivers. Participants consisted of 280 newly licensed driver, of which 140 whose drivers license training included additional simulator-based lessons, and 140 drivers whose training precluded simulator-based lessons. All drivers answered questionnaires pertaining to their intended safe driving behaviors (according to Ajzen's (2000) theory of planned behavior), and to their traffic safety knowledge. Of the initial sample, 40 drivers received actual driving performance evaluation by an expert driving instructor, as well as by in-vehicle data recorders (IVDRs). We assumed that safer drivers report safer driving intentions, demonstrate greater traffic safety knowledge, evaluated as safer drivers by the driving instructor, and display lower and stable driving parameters on the IVDRs. We hypothesized that theoretical driving studies combined with practical training on simulators will elevate the safety level of novices driving. Hierarchical regression analyses on driving intentions indicated that drivers who did not receive simulator-based lessons demonstrated safer driving intentions compared to drivers who received simulator-based lessons. This pattern possibly indicating the drivers who received simulator-based lessons felt more confident in their driving abilities compared to drivers who did not receive simulated training. No significant difference was found in traffic safety knowledge, or in the evaluation of the expert driving instructor. IDVR data comparisons indicated drivers who received simulator-based lessons braked more often and were less prone to headway events, suggesting a more responsive driving style. These findings do not point to any significant advantage or disadvantage of the current simulator-based driving training over other driving training methods.     

Plutonium recycling in hydride fueled PWR cores

The classic approach to the recycling of Pu in PWR is to use mixed U-oxide Pu-oxide (MOX) fuel. The mono-recycling of plutonium in PWR transmutes less than 30% of the loaded plutonium, providing only a limited reduction in the long-term radiotoxicity and in the inventory of TRU to be stored in the repository. The primary objective of this study is to assess the feasibility of plutonium recycling in PWR in the form of plutonium hydride, PuH₂, mixed with uranium and zirconium hydride, ZrH_1.6, referred to as PUZH, that is loaded uniformly in each fuel rod. The assessment is performed by comparing the performance of the PUZH fueled core to that of the MOX fueled core. Performance characteristics examined are transmutation effectiveness, proliferation resistance of the discharged fuel and fuel cycle economics. The PUZH loaded core is found superior to the MOX fueled core in terms of the transmutation effectiveness and proliferation resistance. For the reference cycle duration and reference fuel rod diameter and pitch, the percentage of the plutonium loaded that is transmuted in one recycle is 53% for PUZH versus 29% for MOX fuel. That is, the net amount of plutonium transmuted in the first recycle is 55% higher in cores using PUZH than in cores using MOX fuel. Relative to the discharged MOX, the discharged PUZH fuel has smaller fissile plutonium fraction - 45% versus 60%, 15% smaller minor actinides (MA) inventory and more than double spontaneous fission neutron source intensity and decay heat per gram of discharged TRU. Relative to the MOX fuel assembly, the radioactivity of the PUZH fuel assembly is 26% smaller and the decay heat and the neutron yield are only 3% larger. The net effect is that the handling of the discharged PUZH fuel assembly will be comparable in difficulty to that of the discharged MOX assembly while the proliferation resistance of the TRU of the discharged PUZH fuel is enhanced.