Bayes and classical estimation of environmental factors for thebinomial distribution

An environmental factor converts reliability test results at one environmental condition into equivalent “failure” information at other environments. This paper studies environmental-factor estimation for the binomial distribution. Under general conditions, Bayes point estimates and credibility limits for environmental factors are derived. Classical point and confidence interval estimates are introduced and compared with the Bayes estimators. The characteristics of Bayes and classical estimators for the binomial distribution are summarized through numerical computation and theoretical analysis. A numerical example of reliability assessment by means of environmental factors is presented     

On an evolutionary approach for constrained optimization problem solving

Over the last few decades, many different evolutionary algorithms have been introduced for solving constrained optimization problems. However, due to the variability of problem characteristics, no single algorithm performs consistently over a range of problems. In this paper, instead of introducing another such algorithm, we propose an evolutionary framework that utilizes existing knowledge to make logical changes for better performance. The algorithmic aspects considered here are: the way of using search operators, dealing with feasibility, setting parameters, and refining solutions. The combined impact of such modifications is significant as has been shown by solving two sets of test problems: (i) a set of 24 test problems that were used for the CEC2006 constrained optimization competition and (ii) a second set of 36 test instances introduced for the CEC2010 constrained optimization competition. The results demonstrate that the proposed algorithm shows better performance in comparison to the state-of-the-art algorithms.     

Additive Behavior in Copper Electrorefining

This paper reports on the mode of action of two different organic additives—gelatine and thiourea—during the electrorefining of copper from acid copper sulfate solutions. Gelatine increases the cathode current efficiency and produces smoother deposits up to a certain level of concentration, beyond which, however, these effects are diminished by the steric hinderance of bulky molecular entities adsorbed to the electrode surface. Thiourea decreases the cathode current efficiency when present at concentrations around 5 mg/1. Nonetheless, it improves deposit quality. In higher concentrations, thiourea increases the cathodic current efficiency but also promotes nodule formation and rough deposits. The degradation and/or hydrolysis of both additives and the various interactions with the electrode surface and with cupric ions in solution are also examined.     

Investigating the effect of varying block size on power and energy consumption of GPU kernels

The Journal of Supercomputing - Power consumption is likely to remain a significant concern for exascale performance in the foreseeable future. In addition, graphics processing units (GPUs) have...     

A facile novel synthesis of delafossite CuFeO2 powders

P-type transparent conducting oxides copper delafossite CuFeO₂ powders have been successfully synthesized by using hydrothermal method. The influence of synthesis conditions on the crystal structure, morphology, optical and magnetic properties was systematically studied using X-ray diffraction, scanning electron microscope (SEM), UV–Vis–NIR scanning spectrophotometer and vibrating sample magnetometer. The results indicated the precipitated precursor at pH value of 12 using 1 M NaOH as a base in the presence of hydrazine hydrate as a reducing agent hydrothermally treated at 280 °C for 96 h was transformed to pure rhombohedral 3R delafossite phase. SEM observations of these powders confirmed their hexagonal like structure. The transmittance of the sample was around 65 %. The optical band gap of delafossite–CuFeO₂ sample prepared was 3.5 eV as a visible transparent material. Furthermore, magnetic properties behavior was identified and paramagnetism property was found at a room temperature. The saturation magnetization and coercive force for the pure sample were 1.2 emu/g and 58.35 Oe, respectively.     

Evaluation of environmental design strategies for university buildings

ABSTRACT

This paper examines the performance of environmental strategies in seven recently constructed or refurbished university buildings in the UK. These buildings contain a range of administrative spaces, classrooms, libraries and studios, reflecting their often complex, multi-use, heterogeneous nature. The key features of each environmental strategy are described (including passive, mixed-mode or active systems), in the context of the occupants and spaces they serve and the level of interaction that they afford. Energy performance and occupant thermal comfort (assessed by user surveys) are analysed and compared with studies of other non-domestic buildings, which have typically focused on more predictable single administrative uses (e.g. government offices), and unusually effective operation scenarios (e.g. continuous monitoring by expert building managers). The paper concludes by examining two of the case studies that reflect an increasingly common model of ‘flexible’ environmental design in more detail, identifying key features of the strategies for each building that have had a significant impact on their performance. The design assumptions leading to these features will be explored, and key lessons identified, contributing towards the development of a more robust evidential basis for choosing appropriate environmental strategies for university and other non-domestic buildings in the UK.     

Direct Ink Writing of a Preceramic Polymer and Fillers to Produce Hardystonite (Ca2ZnSi2O7) Bioceramic Scaffolds

The direct ink writing of an ink composed of a preceramic polymer and fillers was used to produce hardystonite (Ca₂ZnSi₂O₇) bioceramic scaffolds. Suitable formulations were developed for the extrusion of fine filaments (350 μm diameter) through a nozzle. The preceramic polymer was employed with the double purpose of contributing to the rheology of the ink by increasing its viscosity and of forming the hardystonite phase upon heat treatment by reacting with the fillers. A control of the rheology is essential when spanning features have to be produced, and therefore the main rheological characteristics of the inks were measured (flow curves, dynamic oscillation tests, viscosity recovery tests) and compared to models reported in the literature. Highly porous scaffolds (up to 80% total porosity) were produced and heat treated in air or in nitrogen atmosphere. The influence of the heat‐treatment atmosphere on the morphology, crystalline phase assemblage, and compressive strength of the scaffolds was investigated.     

Effect of organic loading on a novel hydrogen bioreactor

This study investigated the impact of six organic loading rates (OLR) ranging from 6.5 gCOD/L-d to 206 gCOD/L-d on the performance of a novel integrated biohydrogen reactor clarifier systems (IBRCSs) comprised a continuously stirred reactor (CSTR) for biological hydrogen production, followed by an uncovered gravity settler for decoupling of solids retention time (SRT) from hydraulic retention time (HRT). The system was able to maintain a high molar hydrogen yield of 2.8 mol H₂/mol glucose at OLR ranging from 6.5 to 103 gCOD/L-d, but dropped precipitously to approximately 1.2 and 1.1 mol H₂/mol glucose for the OLRs of 154 and 206 gCOD/L-d, respectively. The optimum OLR at HRT of 8 h for maximizing both hydrogen molar yield and volumetric hydrogen production was 103 gCOD/L-d. A positive statistical correlation was observed between the molar hydrogen production and the molar acetate-to-butyrate ratio. Biomass yield correlated negatively with hydrogen yield, although not linearly. Analyzing the food-to-microorganisms (F/M) data in this study and others revealed that, both molar hydrogen yields and biomass specific hydrogen rates peaked at 2.8 mol H₂/mol glucose and 2.3 L/gVSS-d at F/M ratios ranging from 4.4 to 6.4 gCOD/gVSS-d. Microbial community analysis for OLRs of 6.5 and 25.7 gCOD/L-d showed the predominance of hydrogen producers such as Clostridium acetobutyricum, Klebsiella pneumonia, Clostridium butyricum, Clostridium pasteurianum. While at extremely high OLRs of 154 and 206 gCOD/L-d, a microbial shift was clearly evident due to the coexistence of the non-hydrogen producers such as Lactococcus sp. and Pseudomonas sp.     

Numerical characterization of a piezoelectric composite with hollow metal fillers including new figures of merit,pore shape effects,and distinct piezoceramic types

International Journal of Mechanics and Materials in Design - This paper focuses on the numerical analysis of the properties of porous piezoelectric composites with metal-doped pore surfaces and...