Breakdown Voltage Enhancement of Al0.1Ga0.9 N Channel HEMT with Recessed Floating Field Plate

Silicon - In this paper, electrical and microwave characteristics of Al0.1Ga0.9 N channel HEMTs was reported. The device performance were evaluated for conventional gate, field plate gate,...     

Influence of High-k Passivation Layer on Gate Field Plate AlGaN/GaN/AlGaN Double Heterojunction HEMT

Silicon - In this work, we have analysed the influence of passivation material such as Silicon dioxide (SiO2), Silicon Nitride (Si3N4), Aluminium oxide (Al2O3), Hafnium Silicon Oxide (HfSiO4),...     

Quantifying the mechanical properties of polymeric tubing and scaffold using atomic force microscopy and nanoindentation

Measurement of mechanical parameters of polymeric scaffolds presents a significant challenge due to their intricate shape and small characteristics dimensions of their elements—around 100 μm. In this study, mechanical properties of polymeric tubing and scaffold, made of biodegradable poly(l ‐lactic) acid (PLLA), were characterized using atomic force microscopy (AFM) and nanoindentation, complemented with tensile testing. AFM was employed to assess the properties of the tube and scaffold locally, while nanoindentation produced results with a dependency on the depth of indentation. As a result, the AFM‐measured elastic modulus differs from the nanoindentation data due to a substantial difference in indentation depth between the two methods. With AFM, a modulus between 2 and 2.5 GPa was measured, while a wide range was obtained from nanoindentation on both the tube and scaffold, depending on the indentation scale. Changes in the elastic modulus with in‐vitro degradation and aging were observed over the 1‐year period. To complement the indentation measurements, tensile testing was used to study the structural behavior of the tube, demonstrating the yielding, hardening and fracture properties of the material. POLYM. ENG. SCI., 59:1084–1091, 2019. © 2019 Society of Plastics Engineers     

Solar water splitting with p-SiC film on p-Si: Photoelectrochemical behavior and XPS characterization

The electrochemical properties of single-crystalline p-type 3C-SiC films on p-Si substrate were investigated as an electrode in H₂SO₄ aqueous solutions in dark and under white light illumination. The photoelectrochemical (PEC) measurements indicates the p-type 3C-SiC film on p-Si substrate can generate a cathodic photocurrent as a photocathode, which corresponds to hydrogen production, and generate an anodic photocurrent as a photoanode, which corresponds to oxygen evolution. The surface chemical states of the films were investigated by XPS. In order to observe the surface chemical state changes after PEC test, the range of applied potential to the electrode was divided into three zones: −3.6 to 0 V, 0–1.5 V and 1.5–4 V vs. Ag/AgCl. After separated PEC tests in these three areas, XPS shows the surface of the SiC film in the range of −3.6 to 0 V and 0–1.5 V was stable without oxidation except the band bending occurred. But in the range of 1.5–4 V the film surface was oxidized due to anodic oxidation.     

Realization of Multidimensional Digital Transfer Functions with Separable Numerator or Denominator Polynomials

In this paper a straightforward z-domain procedure for realizing multidimensional transfer functions with either numerator or denominator polynomial separable is presented. This procedure yields structures with minimum number of multipliers. It is shown that the number of delay elements can be reduced by selecting the optimum values for certain parameters. To facilitate this theorems that are applicable for some special cases are presented.     

Improved device performance based on crosslinking of poly (3-hexylthiophene)

Diode devices (glass/ITO/polymer/Al) have been fabricated using poly (3-hexylthiophene) (P3HT) crosslinked with two different biaryl crosslinkers. Crosslinking was performed by exposing the thin films with different wt% of crosslinker to UV irradiation and progress of crosslinking was monitored by IR spectroscopy. An increase in hole mobility of two orders of magnitude has been observed after crosslinking.     

Computing the fault tolerance of multi-agent deployment

A deployment of a multi-agent system on a network refers to the placement of one or more copies of each agent on network hosts, in such a manner that the memory constraints of each node are satisfied. Finding the deployment that is most likely to tolerate faults (i.e. have at least one copy of each agent functioning and in communication with other agents) is a challenge. In this paper, we address the problem of finding the probability of survival of a deployment (i.e. the probability that a deployment will tolerate faults), under the assumption that node failures are independent. We show that the problem of computing the survival probability of a deployment is at least NP-hard. Moreover, it is hard to approximate. We produce two algorithms to accurately compute the probability of survival of a deployment—these algorithms are expectedly exponential. We also produce five heuristic algorithms to estimate survival probabilities—these algorithms work in acceptable time frames. We report on a detailed set of experiments to determine the conditions under which some of these algorithms perform better than the others.     

Creating Shared Information Spaces to Support Collaborative Design Work

The provision of computer support for collaborative work is a central concern for Information Systems (IS) research and practice. In this paper we present the details of an information flow study undertaken in the household division of a large European design and manufacturing company (Delta). The goal of the study was to elicit user requirements for a computer system to facilitate the collaborative work of new product design teams. These requirements form the basis for the design and development of a Web-based LIRÉ (Living Repository) prototype system, the functionalities, features, and rationale of which are discussed. We also present the results of the evaluation of LIRÉ by the users at Delta and our observations on enhancing the sophistication and usefulness of this class of system. A production version based on the prototype but using commercially available software is currently in use by the New Product Development group at Delta.     

Numerical Simulation of Impact of Bores against Inclined Walls

This work presents numerical simulations for the analysis of the impact of a bore against a wall. The 2D governing equations in the vertical plane are solved numerically using a variant of the simplified marker and cell method. Results are obtained for the maximum force and the runup height on the wall. Numerical results for the case of the vertical wall compare well with previous experimental data. A parametric study for the maximum force and the runup height on an inclined wall is presented.