Design of bandpass–bandpass diplexers using rectangular-, T-, and L-shaped resonators for hybrid power amplifier and 5G applications

Analog Integrated Circuits and Signal Processing - In this paper, two bandpass–bandpass diplexers, based on L-, T- and rectangular-shaped resonators are designed and analyzed, which are used...     

Sustainability assessment of Iranian petrochemical companies in stock exchange: A data envelopment analysis-based approach

The assessment of efficiency is always of particular importance according to different indicators from different perspectives. There are various techniques for evaluating petrochemical companies, among which the data envelopment analysis technique is one of the best techniques that can be used to calculate the relative efficiency of a set of decision-making units with network structures. In the present paper, seven petrochemical companies listed in the Iranian stock exchange were analysed. These companies were evaluated in terms of financial performance and sustainable development, and their relative efficiency was calculated during 2015–2016. According to the obtained results, only Marun Petrochemical Co. was found to be efficient in all areas and years. The results also showed that four companies were efficient in financial terms over the period under study. In the general conclusion regarding the companies' performance, Marun was ranked first, Jam was ranked second, and Zagros was ranked third.     

Removal of Cadmium from Aqueous Solution by Nano Composites of Bentonite /TiO2 and Bentonite/ZnO Using Photocatalysis Adsorption Process

Silicon - In this study, bentonite/TiO2 and bentonite/ZnO nanoparticles were used for studying the cadmium removal from the aqueous solution. The experiments were done in a batch condition under...     

Behavior of 316L stainless steel containing corrosion pits under cyclic loading

The environmental performance of 316L grade stainless steel, in the form of tensile specimens containing a single corrosion pit with various aspect ratios, under cyclic loading in aerated chloride solutions is investigated in this study. Results from environmental tests were compared and contrasted with those obtained using finite element analysis (FEA). Fractography of the failed specimens obtained from experiments revealed that fatigue crack initiation took place at the base of the shallow pit. The crack initiation shifted towards the shoulder and the mouth of the pit for pits of increasing depth. This process is well predicted by FEA, as the strain contour maps show that strain is the highest around the centric strip of the pit. However, for shallow pits, local strain is uniformly distributed around that strip but begins to concentrate more towards the shoulder and the mouth region for increasingly deep pits.     

Effect of Shot Peening Operation on the Microstructure and Wear Behavior of AZ31 Magnesium Alloy

Protection of Metals and Physical Chemistry of Surfaces - Shot peening is a treatment used to increase surface hardness and wear resistance. In this study, the effect of shot peening on the...     

A hybrid discontinuous spectral element method and filtered mass density function solver for turbulent reacting flows

Abstract

We present a novel hybrid scheme for the large eddy simulation (LES) of turbulent reacting flows. The scheme couples the discontinuous spectral element method (DSEM) solver for the unsteady compressible Navier-Stokes equations with a Monte Carlo particle filtered mass density function (FMDF) solver for the transport of reacting species. The method is capable of high-order simulations on unstructured grids. Mean particle estimate construction mimics the DSEM numerical procedure and utilizes variable basis functions. The scheme is tested on non-reacting and reacting Taylor-Green vortex flows. Studies of varying polynomial order, different basis functions for constructing particle estimates, and varying particle quantities are conducted. We demonstrate that a tent kernel, in conjunction with high polynomial order, produces the most accurate results. The chemically reacting simulations validate the hybrid scheme and demonstrate its applicability across a range of reaction regimes. The hybrid scheme's computational cost is 2.1 times the DSEM-LES solver.     

A comparative study on citrate sol-gel and combustion synthesis methods of CoAl2O4 spinel

CoAl₂O₄ spinel was successfully synthesized by combustion synthesis method using glycine and urea by 1:1 molar ratio as fuels and sol-gel process using citric acid as a chelating agent. The as-synthesized powders were calcined at desired temperatures to obtain CoAl₂O₄ spinel as a single phase. X-ray diffraction, thermogravimetric, and differential thermal analysis results revealed that the formation of CoAl₂O₄ spinel in combustion method needs 300°C higher temperatures than those of sol-gel. Scanning electron microscopy and transmission electron microscopy analysis results revealed that “sol-gel spinel” had nanometric particle size which was smaller than those of “combustion spinel.” Temperature programed reduction with hydrogen and Fourier transform infrared spectroscopy results declared that there was a little residual cobalt oxide in combustion spinel while there is no oxide resided in “sol-gel spinel.” Consequently, the sol-gel method has more benefit in synthesizing spinel with sulfate precursors than combustion.     

A Distance Based Communication Mode Selection Mechanism for M2M Communications Over Cellular Networks

The implementation of machine-to-machine (M2M) communications in fifth-generation (5G) cellular networks can facilitate with several benefits like enhancement of bandwidth utilization, accommodating large number of users and decreasing traffic load on evolved node B (eNB). Integration of location information of unknown machine in communication mode selection mechanism is the key feature of this research. In this paper, a distance based communication mode selection mechanism using non-orthogonal resource sharing scheme is adopted in the proposed system model. Under the proposed mechanism, the expressions of throughput and RBs utilization policy are derived, which are the key parameters to evaluate the performance in the proposed network. Depending on the mode selection condition, such as threshold distance and threshold SINR between M2M users and regular cellular users, a UE can automatically choose its communication mode in the network. It is supposed that selection of mode before data transfer can improve the system performance. On the other hand, designing of efficient distance assisted proposed resource blocks (RBs) utilization policy reduces the traffic load on the eNB. Extensive simulations are carried out for evaluating the performance of the proposed mechanisms. The system performance is compared with various changeable parameters, such as throughput, mode selection threshold SINR, threshold distance and RBs. Besides, the proposed mechanism provides better network performance as well as reduces the traffic load in the proposed network.

     

Constitutive Relationships for Steel Fibre Reinforced Concrete at Elevated Temperatures

Steel fibre reinforced concrete (SFRC) is an advanced cementitious composite where fibres can act as a profitable replacement for diffused reinforcement, like welded steel mesh, especially for thin cross sections. In this case fire becomes a very important condition in the design. Previous experimental research has shown the benefits in fire resistance of steel fibres, when structural elements are bent. The proper understanding of the effects of elevated temperatures on the properties of SFRC is necessary. In this study, constitutive relationships are developed for high-strength FRSC subjected to fire, with the purpose of given that capable modelling and to specify the fire-performance criteria for concrete structures. They are developed for unconfined FRSC specimens that include compressive and tensile strengths, modulus of elasticity, modulus of rupture, strain at peak stress, and compressive stress–strain relationships at elevated temperatures. The proposed relationships at elevated temperature are compared with experimental results. These results are used to establish compressive stress–strain relationships. Further experimental results for tension and the other main parameters at elevated temperature are needed in order to establish well-founded models and to improve the proposed constitutive relationships, which are general, rational, and fit well with the experimental results.