Isomeric Carborane Neuromuscular Blocking Agents

We synthesized a family of neuromuscular blocking agents (NMB) based on decamethonium, but containing a carborane cluster in the methylene chain between the two quaternary ammonium groups. The carborane cluster isomers o-NMB, m-NMB, and p-NMB were tested in animals for neuromuscular block and compared with agents used clinically: rocuronium and decamethonium. All three isomers caused reversible muscle weakness in mice as determined by grip strength and inverted screen tests, with a potency rank of p-NMB > rocuronium > decamethonium > m-NMB > o-NMB. The mechanism of action of the compounds was determined by using the in vitro rat phrenic nerve hemi-diaphragm preparation and electrophysiologic measurements in cells. Neostigmine reversed hemi-diaphragm weakness caused by the three isomers and rocuronium, but not succinylcholine. In electrophysiologic recordings of currents through acetylcholine receptor channels, the carborane compounds did not activate channel activity but did inhibit channel activation by acetylcholine. These results demonstrate that the carborane neuromuscular blocking agents are non-depolarizers in contrast to the depolarizing action of the parent compound.     

Effects of microstructure on fracture strength and conductivity of sintered NMC333

Sintering of LiNi_0.33Mn_0.33Co_0.33O₂ cathode material was investigated for potential application in all-electric aerospace propulsion systems utilizing new architectural concepts. All-solid-state batteries, while inherently safe, may not reach the high energy density required for next generation propulsion systems. To meet this performance requirement, multifunctionality of sintered active material may achieve systems level weight savings through simultaneous load bearing and electrochemical energy storage performance. The effects of sintering conditions on structural stability, chemistry, densification, grain size, fracture strength and electrical conductivity were quantified for the active cathode material. X-ray diffraction and inductively coupled plasma results indicated the structure and stoichiometry were maintained across the range of processing conditions to facilitate intercalation. Densification was achieved by sintering at 1050°C in ambient atmosphere, but grain coarsening was observed for higher temperatures and longer hold times. Mechanical strength was improved with reduction in porosity, but excessive grain growth decreased strength, providing a maximum of 50 MPa for samples sintered at 1050°C for 10 hours. Electrical conductivity initially improved with densification, but significantly diminished as the microstructure coarsened. The optimal sintering condition of 1050°C maximized mechanical fracture strength and electrical conductivity, with shorter sintering times preferred.     

Liquid marbles,formation and locomotion using external fields and forces

Liquid marbles may be traditionally formed by rolling a droplet on a bed of non-wetting particles resulting in encapsulation and stabilisation. Particles used in this process may range from nanometre to millimetre if handled with sufficient care. This method, however, runs the risk of droplet coalescence and is limited to non-wetting particles. Currently there exist some alternative methods of formulation including using electrostatics to either deliver a particle bed to the droplet or pull the droplet to the particles. The former has shown some promise in potential batch processes but is hindered by interparticle forces. Additional production methods include a form of blender, but this has shown to be unable to produce marbles of a narrow size distribution. Once formed, liquid marbles have demonstrated value as potential blood typing devices, as micro-reaction vessels due to the inherent barrier between the internal phase and the substrate whilst maintaining gas permeability, and as contaminant sensors. Liquid marbles also demonstrate a remarkable level of elasticity under compressive force and reduced evaporation rates when compared to bare water droplets, a function of the size and composition of the stabilising particles. In addition to this, liquid marbles have been proposed as actuators. Locomotion may easily be induced in these structures, using electrostatics, sound, magnetism or light depending on the particle/liquid combinations used in formation, and the environment of deployment. This review seeks to present and summarise recent advances in the field of liquid marble manufacture and methods for actuation. We also aim to highlight potential future avenues of further study within this arena.     

Enclosure Smoke Filling and Management with Mechanical Ventilation

Enclosure smoke filling and management are addressed from the standpoint of the volumetric flow rates commonly used for mechanical ventilation system design. In this context, fire-induced gas expansion is treated as a volumetric source term. A two-layer analysis developed previously for enclosure smoke filling without mechanical ventilation is extended to consider the impact of mechanical ventilation on smoke layer descent rates and conditions within the smoke layer. A spreadsheet-based model of enclosure smoke filling developed in conjunction with the previous unventilated analysis is also extended to consider both mechanical extraction and injection systems. Some implications of mechanical ventilation on the development and descent of a smoke layer in an enclosure fire are discussed.     

The extinguishment of fires using low flow water hose streams—part II

Fire extinguishment tests were conducted in a simulated shipboard space. Portable extinguishers, a low flow water hose reel system, and 3.8 cm diameter water hand lines were used to extinguish the fires. Various protective ensembles were used by the fire fighters, ranging from minimum protection to full protection. Personnel with both a limited and high degree of fire fighting experience were used. Response time was influenced by visibility and the fire fighters' knowledge of the compartment. The low flow water hose reel system was found to be an effective and efficient quick response fire fighting tool. Efficiency, in terms of total water used, was better with the hose reel system compared to the larger, higher flow water hand lines.     

A computational and experimental study of ultra fine water mist as a total flooding agent

Computational fluid dynamics (CFD) calculations were carried out to design total flooding fire tests in a 28 m³ compartment for an ultra fine water mist (<10 μm). The exit momentum of the mist produced by a proprietary ultrasonic generator technology was extremely low with a mist discharge velocity below 1 m/s. The mist was discharged with multiple floor outlets equally spaced around the centrally located 120 kW pool-like gas fire. The transport of mist and its interaction with the fire was simulated by Fluent, a commercial CFD model. Lagrangian Discrete Phase Model (DPM) was used for droplets. Simulation predicted extinguishment within 10 s with a mist delivery rate of 1 l/min. However, in total flooding fire tests conducted, extinction times were more than 5 min. Additional computations approximating the ultra fine mist (UFM) as a dense gas agreed well with the observed transport timescales of minutes indicating that UFM behaves like a gas. Further, the mist–fire interaction needs a multi-phase Euler–Euler approach with a droplet vaporization model.     

Simultaneous Enhancement of Fracture Toughness and Unipolar Strain in Pb(Zr,Ti)O3‐ZrO2 Composites Through Composition Adjustment

The influence of second phase zirconia particles on the electrical properties and fracture behavior of various polycrystalline soft Pb(Zr_1?xTi_x)O₃ (PZT) compositions was investigated. PZT composites with yttria‐stabilized tetragonal zirconia particles exhibited enhanced crack resistance in comparison to monolithic compositions, regardless of the PZT composition. The addition of zirconia, however, was found to change the PZT composition through the diffusion of zirconium, resulting in variations in the observed piezoelectric and ferroelectric responses. Through the tailoring of the PZT matrix composition, the large electromechanical response and enhanced fracture toughness could be retained. The variation in both small and large signal properties is contrasted to fracture results and crystal structure changes, as determined by X‐ray diffraction.