Profiling hot isostatically pressed canister–wasteform interaction for Pu-bearing zirconolite-rich wasteforms

Zirconolite-rich full ceramic wasteforms designed to immobilize Pu-bearing wastes were produced via hot isostatic pressing (HIP) using stainless steel (SS) and nickel (Ni) HIP canisters. A detailed profiling of the elemental compositions of the major and minor phases over the canister–wasteform interaction zone was performed using scanning electron microscopy combined with energy-dispersive X-ray spectroscopy (SEM-EDS) characterization. Bulk sample analyses from regions near the center of the HIP canister were also conducted for both samples using X-ray diffraction and SEM-EDS. The sample with the Ni HIP canister showed almost no interaction zone with only minor diffusion of Ni from the inner wall of the canister into the near-surface region of the wasteform. The sample with the SS HIP canister showed ∼100–120 μm of interaction zone dominated by high-temperature Cr diffusion from canister materials to the wasteform with the Cr predominantly incorporated into the durable zirconolite phase. We also examined, for the first time, changes to the HIP canister wall thickness caused by HIPing and demonstrated that no canister wall thinning occurred. Instead, in the areas examined, the canister wall thickness was observed to increase (up to ∼20%) due to the compression occurring during the HIP cycle. Further, only sparse formation of (Cr, Mn)-rich oxide particles were noted within the HIP canister inner wall area immediately adjacent to the ceramic material, with no evidence for reverse diffusion of ceramic materials. Though the HIP canister–wasteform interaction extends to ∼120 μm when using an SS HIP canister for the system investigated, this translates to <<1 vol.% for an industrial scale HIPed wasteform. Importantly, the HIP canister–wasteform interactions did not produce any obviously less durable phases in the wasteform or had any detrimental impact on the HIP canister properties.     

Poly(N-isopropylacrylamide)/mesoporous silica thermosensitive composite hydrogels for drug loading and release

Temperature-sensitive hydrogels are attracting increasing attention for controlled drug delivery. However, achieving high drug loadings and sustained drug release remains challenging. Herein, we describe the successful synthesis of a series of novel temperature-sensitive poly(N-isopropylacrylamide) (PNIPA)/mesoporous silica nanoparticles (MSN) hydrogels by physical crosslinking of NIPA with MSN. The external and internal structures, temperature sensitivity, drug-loading capacity, and blood compatibility of the PNIPA/MSN composite hydrogels are studied. Results show that MSN addition improved the network structure and adjusted the size of the hole, MSN could also act as drug carrier, thereby enhancing the drug loading capacity. The composite hydrogels underwent a phase transition at 33.7 °C (at the lower critical solution temperature). The hemolysis rate of the composite hydrogels was less than 1%, thus they can be classified as a nonhemolytic materials with good biocompatibility. The composite hydrogels reported here thus have great potential in drug transport and temperature-activated drug release. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48391.     

Homogeneous polymer/filler composite membrane by spraying method for enhanced direct methanol fuel cell performance

In this work, composite membranes for a direct methanol fuel cell (DMFC) were prepared using a spraying method to improve cell performance especially at a high methanol concentration. Nafion polymer and mordenite as a filler were used for the composite membrane preparation using a spraying method and a conventional solution casting method and the membranes from the two methods were compared. SEM images showed that a more homogeneous composite membrane could be obtained using the spraying method. The effect of mordenite content was also studied. The membranes were consequently characterized and tested in DMFC operation. The results were compared to those prepared using the solution casting method at 30, 50, and 70 °C with methanol concentrations of 2, 4, and 8 M. It was found that the membrane with 5 wt.% mordenite from the spraying method showed a vast improvement in DMFC performance. When the cell was operated at 70 °C, the maximum power density of 5 wt.% mordenite from the spraying method was higher than that of commercial membrane and 5 wt.% from the solution casting method. Power densities from the 5 wt.% sprayed membrane were higher by around 29%, 40%, and 60% at 2, 4, and 8 M methanol concentration, respectively.     

Lipids from Wastewater-Activated Sludge Cultivated on Acetic Acid as Potential Alternatives to High-Value Oils and Fats

This study focuses on new interpretations of the published literature by statistically evaluating the potential of microbial lipids from activated sludge (AS) as alternatives to high-value oils and fats. There are two data analysis stages involved in this study after compilation and organization of fatty acid profiles from the literature databases: (1) comparison of fatty acid profiles of the cultivated AS lipids with that of oils and fats found in the literature databases, and (2) hierarchical cluster analysis of the fatty acids of the combined dataset of literature oils and fats, and the AS lipids. Results show that fatty acid profiles of lipids from cultivated AS were similar to the fatty acid profiles of some oils and fats of plant, animal, single-microbial cultures, and algal origins; hence, lipids from AS could be potential alternatives to specialty oils and fats. The cultivation conditions of AS during lipid content enhancement may influence lipid application.     

Liver proteomic analysis of postpartum Holstein cows exposed to heat stress or cooling conditions during the dry period

Heat stress negatively affects cow performance, compromises immune function, and increases susceptibility to metabolic disorders, particularly during the dry period and as cows transition from gestation to lactation. Metabolic adaptations of the liver are critical for successful transition, yet it is unclear how heat stress affects metabolic pathways within the liver at the proteomic level. The objective of this study was to investigate the liver proteome of postpartum cows that were cooled or heat stressed during the dry period to gain insight into how protein expression is altered by prior heat stress and may contribute to performance and disease outcomes. During the dry period, cows were either housed in shaded barns with fans and water soakers [cooled group (CL); n = 5] or in shaded barns lacking these cooling devices [heat-stressed group (HT); n = 5]. Liver biopsies were collected at 2 d postpartum, and protein content was analyzed by label-free quantitative shotgun proteomics (nanoscale liquid chromatography coupled to tandem mass spectrometry). In the most comprehensive bovine liver proteomics analysis completed to date, we identified 3,270 proteins, 75 of which were differentially expressed between HT and CL cows (fold change ±1.2). The top pathways differing between HT and CL cows were oxidative phosphorylation, mitochondrial dysfunction, farnesoid X receptor/retinoid X receptor (FXR/RXR) activation, and the methylmalonyl pathway. Cooling cows during the dry period likely improves ATP production, reduces oxidative stress, and prevents excessive accumulation of hepatic triglycerides and cholesterol, which may contribute to greater milk yield and lower susceptibility to transition-related diseases.     

The Role of Cholesterol on Triterpenoid Saponin-Induced Endolysosomal Escape of a Saporin-Based Immunotoxin

Cholesterol seems to play a central role in the augmentation of saporin-based immunotoxin (IT) cytotoxicity by triterpenoid saponins. Endolysosomal escape has been proposed as one mechanism for the saponin-mediated enhancement of targeted toxins. We investigated the effects of lipid depletion followed by repletion on Saponinum album (SA)-induced endolysosomal escape of Alexa Fluor labelled saporin and the saporin-based immunotoxin OKT10-SAP, directed against CD38, in Daudi lymphoma cells. Lipid deprived cells showed reduced SA-induced endolysosomal escape at two concentrations of SA, as determined by a flow cytometric method. The repletion of membrane cholesterol by low density lipoprotein (LDL) restored SA-induced endolysosomal escape at a concentration of 5 µg/mL SA but not at 1 µg/mL SA. When LDL was used to restore the cholesterol levels in lipid deprived cells, the SA augmentation of OKT10-SAP cytotoxicity was partially restored at 1 µg/mL SA and fully restored at 5 µg/mL SA. These results suggest that different mechanisms of action might be involved for the two different concentrations of SA and that endosomal escape may not be the main mechanism for the augmentation of saporin IT cytotoxicity by SA at the sub-lytic concentration of 1 µg/mL SA.