Chitosan-based magnetic molecularly imprinted polymer: synthesis and application in selective recognition of tricyclazole from rice and water samples

A tricyclazole selective chitosan/Fe₃O₄ magnetic molecularly imprinted polymer (MMIP) was synthesized using non-covalent binding polymerization involving methacrylic acid (MAA) as functional monomer, divinylbenzene (DVB-80) as crosslinker, 2,2'-azobisisobutyronitrile as initiator, acetonitrile/toluene (75:25, v/v) as porogenic solvent and tricyclazole as template. Surface morphology and magnetic characterization of the prepared imprinted and non-imprinted polymers were done using scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectrometry and vibrating sample magnetometry, respectively. The adsorption kinetic data fitted best in pseudo-second-order model. The adsorption equilibrium was achieved in 30 min and the maximum binding capacity was 4579.9 µg/g. The Freundlich isotherm model was found suitable for explaining the binding isotherm data (R² > 0.99). Negative values of thermodynamic parameters ∆G (Gibb’s free energy), ∆H (enthalpy), and ∆S (entropy) revealed exothermic and spontaneous nature of adsorption processes. It also revealed decreased randomness at the solid–liquid interface during sorption. The scatchard plot analysis suggested heterogeneity of binding sites on MMIPs. The molecular recognition selectivity of MMIPs towards tricyclazole was much higher, as compared to its structural analogues, tebuconazole (α = 28.58) and hexaconazole (α = 37.16). The MMIPs were successfully applied to separate and enrich tricyclazole from fortified samples of rice and water, with a recovery percentage of 89.4% and 90.9%, respectively. These reusable imprinted polymers possessing high selectivity and specificity can be utilized as an adsorbent for solid-phase extraction in sample preparation for tricyclazole residue analysis in complex environmental matrices.

     

Harmony search algorithm for infinite impulse response system identification

In this paper, optimal sets of filter coefficients are searched by a meta-heuristic optimization technique called Harmony Search (HS) algorithm for infinite impulse response (IIR) system identification problem. For different optimization problems, HS algorithm undergoes three basic rules; namely Random Selection (RS), Harmony Memory Consideration (HMC), and Pitch Adjustment (PA) rules, which are inspired from the process that the musicians use to improvise a perfect state of harmony with the consummate skill of blending notes in tune. With the help of the properly selected control parameters, a perfect balance is achieved in exploration and exploitation in searching phases. The detailed analysis of simulation results emphasizes the strength of HS algorithm to find the near-global optimal solution, quality of convergence profile and the speed of convergence while tested against standard benchmark examples for same and reduced order models.     

Sand corrosion,thermal expansion,and ablation of medium- and high-entropy compositionally complex fluorite oxides

Sand corrosion, thermal expansion, and ablation properties of a new class of medium- and high-entropy compositionally complex fluorite oxides (CCFOs) are examined as potential protective coating materials. Five binary oxides were mixed and sintered into dense, single-phase CCFOs of the general formula: [Hf_(1-2x)/3Zr_(1-2x)/3Ce_(1-2x)/3Y_xYb_x]O_2-δ (x = 0.2, 0.074, and 0.029). These CCFOs exhibit decreased molten sand infiltration and interaction at intermediate temperatures (1200-1300°C) in comparison with a cubic yttria-stabilized zirconia (YSZ) reference; however, at higher temperatures, the trend is reversed due to the increased chemical reactivity. The equimolar high-entropy (Hf_0.2Zr_0.2Ce_0.2Y_0.2Yb_0.2)O_2-δ exhibits no grain boundary penetration by molten sand at all examined temperatures (1200°C-1500°C), although reaction and precipitation are significant. Moreover, these CCFOs exhibit higher intrinsic thermal expansion coefficients (CTE) than the YSZ reference, thereby being more compatible with Ni-based superalloys. The 8YSZ-like (Hf_0.284Zr_0.284Ce_0.284Y_0.074Yb_0.074)O_2-δ exhibits the highest CTE in this series of CCFOs due to oxygen clustering effects. Finally, these CCFOs also exhibit lower emissivities and form unique faceted microstructures in ablative environments.     

Application of evolutionary optimization techniques for finding the optimal set of concentric circular antenna array

In this paper the maximum sidelobe level (SLL) reductions, optimal beam patterns and optimal beam widths of various designs of three-ring planar concentric circular antenna arrays (PCCAA) are examined using three different classes of evolutionary optimization techniques to finally determine the global optimal three-ring PCCAA design and then establish some sort of ranking among the techniques. Apart from physical construction of a PCCAA, one may broadly classify its design into two major categories: uniformly excited arrays and non-uniformly excited arrays. The present paper assumes non-uniform excitations and uniform spacing of excitation elements in each three-ring PCCAA design and a design goal of maximizing SLL reduction associated with optimal beam patterns and beam widths. The design problem is modeled as an optimization problem for each PCCAA design and solved using different evolutionary optimization techniques to determine an optimum set of normalized excitation weights for PCCAA elements, which, when incorporated, results in a radiation pattern with optimal (maximum) SLL reduction. Among the various PCCAA designs, one which yields the global minimum SLL with global minimum first null beamwidth is the global optimal design. In this work the three-ring PCCAA containing (N₁ = 4, N₂ = 6, N₃ = 8) elements proves to be such global optimal design. The optimization techniques employed are real coded GA (RGA), canonical PSO (CPSO), craziness based PSO (CRPSO), evolutionary programming (BEP), hybrid evolutionary programming (HEP). While ranking the techniques after 30 total runs for each design, HEP, CRPSO, RGA, CPSO, BGA hold the first five ranks in order of optimization capability. HEP yields global minimum SLL (?32.86 dB) and global minimum BWFN (77.0°) for the optimal design. BEP often changes the rank from second to fifth depending on the design set. Further, when compared to a uniformly excited PCCAA having equal number of elements and same radii a reduction of major lobe beamwidth is also observed in the optimal non-uniformly excited case.     

Polyacrylonitrile solution homogeneity study by dynamic shear rheology and the effect on the carbon fiber tensile strength

Poly(acrylonitrile‐co‐methacrylic acid) (PAN‐co‐MAA)/N,N‐dimethylformamide (DMF) solutions were prepared and dynamic shear rheology of these solutions were investigated. With increasing stirring time up to 72 h at 70°C, the polymer solution became less elastic (more liquid‐like) with a ～60% reduction in the zero‐shear viscosity. Relaxation spectra of the PAN‐co‐MAA/DMF solutions yield a decrease in relaxation time (disentanglement time, τ_d), corresponding to an about 8% decrease in viscosity average molecular weight. The log‐log plot of G′ (storage modulus) versus G″ (loss modulus) exhibited an increase in slope as a function of stirring time, suggesting that the molecular level solution homogeneity increased. In order to study the effect of solution homogeneity on the resulting carbon fiber tensile strength, multiple PAN‐co‐MAA/DMF solutions were prepared, and the precursor fibers were processed using gel‐spinning, followed by continuous stabilization and carbonization. The rheological properties of each solution were also measured and correlated with the tensile strength values of the carbon fibers. It was observed that with increasing the slope of the G′ versus G″ log‐log plot from 1.471 to 1.552, and reducing interfilament fiber friction during precursor fiber drawing through the addition of a fiber washing step prior to fiber drawing, the carbon fiber strength was improved (from 3.7 to 5.8 GPa). This suggests that along with precursor fiber manufacturing and carbonization, the solution homogeneity is also very important to obtain high strength carbon fiber. POLYM. ENG. SCI., 56:361–370, 2016. © 2016 Society of Plastics Engineers     

Solid‐state NMR study of spin finish of thermally treated PAN and PAN/CNT precursor fibers

Dry‐jet wet‐spun polyacrylonitrile (PAN) and PAN/carbon nanotubes (CNTs) precursor fibers coated by spin finishes were characterized using the solid‐state ¹H nuclear magnetic resonance technique. Series of fiber samples were prepared upon thermal treatment at different temperatures (room temperature to 180°C). Using the Hahn echo sequence, relatively mobile components were identified and the effect of the heat treatment on those components was studied. It was observed that the mobile components are mainly the spin finishes. Heat treatment caused loss of one of the spin finishes (Type B) to a great extent (～80%), whereas the other two spin finishes (Type A and Type C) were more stable. Additional information regarding the change in molecular mobility due to heat treatment was obtained by the spin‐lattice relaxation time ( T₁ ) analysis. It was found that the presence of CNT affects the T₁ relaxation time of the polymer in the composite fiber, however, that of relatively mobile components remains unaffected. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40734.     

A computer simulation approach to evaluating bowl versus inverted bowl assembly line arrangement with variable operation times

A computer simulation model was used to evaluate a bowl versus inverted bowl assembly line arrangement for normal and exponential distributions and variances equal to 1 and 16. The model was developed on the basis of a realistic case problem and applied to a six-station assembly line. The results show that the inverted bowl is superior to the bowl arrangement for a normal distribution in terms of the total elapsed time evaluation criterion; however, with an exponential distribution, the bowl was found better than the inverted bowl for the same criterion. On the basis of the average percentage of working time and the average time in the system evaluation criteria, the bowl was found superior to the inverted bowl for a normal distribution. Similar results were obtained for an exponential distribution with a variance equal to 1, but no definitive inference could be made with a variance equal to 16.     

Optimum lipid production using agro-industrial wastewater treated microalgae as biofuel substrate

Abundant wastewater discharges from palm oil industries in tropical nations being a valuable resource of biodiesel need proper exploration. Research hinted that such wastewater as economical nutrient source or substrate can support the cultivation of microalgae. In this experiment, we have tested the growth and lipid production of five different microalgal strains in palm oil mill effluent (POME). POME as a biofuel substrate is demonstrated to be lucrative for microalgae-assisted lipids production. POME is rich in macro- and micronutrients can be used as a growth medium for algal growth in order to reduce the growth medium cost and environmental pollutions. Among the five microalgal strains tested, Chlorella sorokiniana revealed optimum biomass and lipid production. The productivity was evaluated in terms of chlorophyll content, growth rate, biomass, and lipid content, which discerned to be 0.099/day, 8.0 mg/L day and 2.68 mg/mg cell dry weight (CDW). Furthermore, in this study, an optimization study was carried out to enhance the microalgae to produce high lipid content using carbon-to-nitrogen ratio and different light/dark periods. The presence of nitrogen combined glucose (with a carbon-to-nitrogen ratio 100:7) as an alternative source to carbon displayed higher lipid production of 2.68 (mg/mg CDW) by C. sorokiniana. This study confirms that 8:16 h light/dark condition at C:TN ratio of 100:7 supported to produce high lipid content of 17 mg lipid/mg CDW. The above results revealed that POME could be a suitable growth media for the alga C. sorokiniana to improve the maximum lipid yield for biofuels production.     

A parallel multistep predictor-corrector algorithm for solving ordinary differential equations

In this paper we give a generalized predictor-corrector algorithm for solving ordinary differential equations with specified initial values. The method uses multiple correction steps which can be carried out in parallel with a prediction step. The proposed method gives a larger stability interval compared to the existing parallel predictor-corrector methods. A method has been suggested to implement the algorithm in multiple processor systems with efficient utilization of all the processors.     

Liver-Specific Pyruvate Dehydrogenase Complex Deficiency Upregulates Lipogenesis in Adipose Tissue and Improves Peripheral Insulin Sensitivity

The pyruvate dehydrogenase complex (PDC) plays a critical role in lipid synthesis and glucose homeostasis in the fed and fasting states. The central role of the liver in the maintenance of glucose homeostasis has been established by studying changes in key enzymes (including PDC) and the carbon-flux via several pathways under different metabolic states. In the present study we have developed a murine model of liver-specific PDC deficiency using Cre-loxP technology to investigate its consequences on lipid and carbohydrate metabolism. There was no incorporation of glucose-carbon into fatty acids by liver in vitro from liver-specific Pdha1 knockout (L-PDHKO) male mice due to absence of hepatic PDC activity. Interestingly, there was a compensatory increase in lipogenic capacity in epididymal adipose tissue from L-PDHKO mice. Both fat and lean body mass were significantly reduced in L-PDHKO mice, which might be explained by an increase in total energy expenditure compared with wild-type littermate mice. Furthermore, both liver and peripheral insulin sensitivities measured during a hyperinsulinemic-euglycemic clamp were improved in L-PDHKO mice. The findings presented here demonstrate (i) the indispensable role of PDC for lipogenesis from glucose in liver and (ii) specific adaptations in lipid and glucose metabolism in the liver and adipose tissue to compensate for loss of PDC activity in liver only.