Digestive protection of probiotic Lacticaseibacillus rhamnosus in Ricotta cheese by monoglyceride structured emulsions

This research aimed at studying the potential use of monoglyceride (MG) structured emulsions (MSEs) as delivery and protective systems for probiotic bacteria in Ricotta cheese. To this purpose, a low-fat commercial Ricotta cheese was added with MSEs formulated with milk, as water phase, and sunflower oil (MSE-SO) or anhydrous milk fat (MSE-AMF), as lipid phase. A commercial whole milk Ricotta cheese (W-RC) was considered as reference. A probiotic Lacticaseibacillus rhamnosus strain was inoculated as free cells in W-RC or embedded into the MSEs and added to the low-fat Ricotta at the same reference fat content. After physico-chemical characterisation, L. rhamnosus viability and sample destructuring behaviour upon in vitro digestion were evaluated. At the end of in vitro digestion, both W-RC and sample containing MSE-SO were unable to protect cells. By contrast, sample with AMF ensured a sufficient probiotic viability, even after 14 days of storage at 4 °C. This result was attributed to system composition and structure. During the gastric phase, the presence of caseins and MG-AMF mixed structures induced the formation of clots, entrapping and protecting cells against the acidic pH of the stomach, as confirmed by confocal micrographs and particle size. During the intestinal phase, cell viability was guaranteed by the formation of mixed micelles promoted by MG. It was demonstrated that microbial cells located near MG structures where they found protection.     

Late-Stage Hydrocarbon Conjugation and Cyclisation in Synthetic Peptides and Proteins

The conventional S-alkylation of cysteine relies upon using activated electrophiles. Here we demonstrate high-yielding and selective S-alkylation and S-lipidation of cysteines in unprotected synthetic peptides and proteins by using weak electrophiles and a Zn²⁺ promoter. Linear or branched iodoalkanes can S-alkylate cysteine in an unprotected 38-residue Myc peptide fragment and in a 91-residue miniprotein Omomyc, thus highlighting selective late-stage synthetic modifications. Metal-assisted cysteine alkylation is also effective for incorporating dehydroalanine into unprotected peptides and for peptide cyclisation via aliphatic thioether crosslinks, including customising macrocycles to stabilise helical peptides for enhanced uptake and delivery to proteins inside cells. Chemoselective and efficient late-stage Zn²⁺-promoted cysteine alkylation in unprotected peptides and proteins promises many useful applications.     

Response of Corn Seedlings (Zea mays L.) to Different Concentrations of Nitrogen in Absence and Presence of Silicon

Silicon - Corn plants are highly demanding of nitrogen and the application of silicon has been studied because it minimizes stress from different natures, and for the better utilization of some...     

Microwave hybrid fast sintering of red clay ceramics

This work aimed to examine the performance of the hybrid sintering of clay ceramic in a microwave furnace, compared to the sintering process in a conventional furnace. The raw materials were subjected to X-ray fluorescence, loss on ignition (LOI), X-ray diffraction, particle size distribution, real specific mass, and thermogravimetric analyses. The red clay ceramic mass was prepared, extruded, pre-sintered in a conventional furnace at 600°C/60 min, and sintered at temperatures between 700 °C and 1100 °C. The sintering conventional (resistive oven) was carried out for 60 min with a heating rate of 10°C/min. In the microwave furnace, the sintering times were 5, 10, and 15 min, with a heating rate of 50°C/min, with a sintering chamber coated with silicon carbide (susceptor). The sintered specimens were characterized according to linear shrinkage, water absorption, apparent porosity, apparent specific mass, X-ray diffraction, Raman spectroscopy analysis, spectroscopy analysis in the ultraviolet and visible regions, microhardness, and scanning electron microscopy. The results showed that microwave sintering promoted an increase in the microhardness and apparent specific mass, and reduction in water absorption and apparent porosity values, due to greater densification in the microstructure. The best results occurred for specimens sintered at 1100°C.     

Effect of height on the corrosion of steel and galvanized steel in nontropical coastal marine environments

In this study, the behavior of carbon steel and galvanized steel in nontropical coastal marine environments was evaluated. Evaluation was carried out with specimens with dimensions of 10 cm × 10 cm × 0.3 cm. These specimens were exposed to four testing stations (Iquique, Mejillones, Los Vilos, and San Vicente), where racks were installed both at ground level (ground), as well as in the upper zone of electrical transmission towers (tower). In each station, 24 specimens of A36 carbon steel and galvanized steel were placed (12 each). The corrosivity of the environment was measured using the ISO 9223, 9225, and 9226 standards. The specimens were evaluated on-site, monthly, through visual inspection and photographic record. Once withdrawn, the corrosion rate was determined and the corrosion products were analyzed through Raman and Fourier-transform infrared. The results show that, in all cases, the corrosion rate is greater in the tower than on the ground. However, even though the Los Vilos station is located farther from the sea (3,500 vs. ≈500 m), the corrosion rate of steel in the tower is the highest. This is caused by the generation of HCl from the transformation of lepidocrocite into goethite, in the presence of low chloride content, which acidifies the steel/corrosion product interface. In the case of galvanized steel, the corrosion rate is a function of the chloride content in the atmosphere, obtaining an excellent correlation between both parameters.     

Combined application of electrolysed water and ultrasound to improve the sanitation of knives in the meat industry

This study investigated the effect of the combination of basic electrolysed water (BEW) and slightly acid electrolysed water (SAEW) with ultrasound (US) for cleaning and sanitation of the knives used in slaughtering processes. The knives were sonicated in a US bath using two modes of operation (normal and sweep) in two steps: (i) 5 min with BEW and (ii) 10 min with SAEW at 35 °C. The microbiological counts and the possible changes in the physical structure of the knives were evaluated. The association BEW + SAEW + US, in the sweep mode, provided lower mesophilic, enterobacterial, Staphylococcus aureus and yeast counts when compared to the values recommended by the international legislation. In addition, these conditions removed all organic residues from the knife blades and promoted the highest migration rate of the residues to the US water bath (12.35 mg/L·min), without modifications in the knife blades. Thus, cleaning and sanitation of knives was feasible with the association of BEW + SAEW + US, which could be a useful alternative for the meat industry.     

Packet loss detection in networked control systems

One of the main issues related to the reliable operation of network control systems concerns the design of mechanisms able to detect anomalies in the functioning of the communication network through which the control loops are closed. In this article, we address the problem of detecting the occurrence of packet losses and design a mechanism that can detect the occurrence of packet losses directly from process sensor data. Specifically, we propose a moving‐horizon estimation scheme that permits to detect if the packet‐loss rate exceeds prescribed thresholds, which are representative of stability and performance of the control system. We discuss theoretical properties of the proposed solution along with an approximation scheme with reduced computational burden. A numerical example is discussed to substantiate the analysis.