Water leakage due to the welding defect and improvement to reach 1-MW beam operation in the mercury target of J-PARC

ABSTRACT

Neutron flux per pulse reached world record at neutron source in Japan Proton Accelerator Research Complex (J-PARC). In the J-PARC, mercury target system is used as a spallation neutron source. A target vessel has a multi-walled protection system that comprises a mercury vessel enclosed with a double-walled water shroud. This is to prevent the leakage of the mercury outside the target vessel. The multi-walled structure needed to be complicated with a lot of welding lines. However, during the operation, we faced an unscheduled shutdown due to water leakage to the intermediate layer between the mercury vessel and water shroud. An investigation on the cause of the leakage was carried out. It is deduced that the leakage path was formed due to the crack propagation from welding defects that are caused by the complicated multi-walled structure. The crack propagation is attributed to the repeated stress by pressure waves generated in the mercury target. Based on the investigation results, the design was improved to remove the welding line on the complicated structure and to realize the stable operation with 1 MW proton beam, which is the final design value of the neutron source in J-PARC.     

Technical investigation on small water leakage incident occurrence in mercury target of J-PARC

Japan Proton Accelerator Research Complex experienced failures of two mercury targets, which were Target #5 and #7, in 2015 when the facility was operating with a proton beam power of 500 kW. The failures involved coolant water leak from the water shroud. In this paper, we investigate the root cause of the Target #5 failure. The results of the visual inspections, mockup tests, and analytical evaluations suggested that the water leak was caused by the possible combination of two incidents. One was the diffusion bonding failure due to the large thermal stress induced by welding of the bolt head during the fabrication process, and the other was the thermal fatigue failure of the seal weld due to the repetitive beam shutdown during beam operation. Though the investigation into the root cause of the Target #7 failure is still going on, these target failures point to the importance of eliminating initial defects and the need to secure the rigidity and stability of welded structures. The next mercury target, Target #8, was fabricated with an improved design and fabrication process to reduce the possibility of similar failures. The beam operation of this mercury target is planned to be started in October 2017.     

Recovery of Precious and Base Metals from Waste Printed Circuit Boards Using a Sequential Leaching Procedure

This paper considers the issue of recycling of waste printed circuit boards (WPCBs) containing precious and base metals in appreciable amounts. High-pressure oxidative leaching (HPOL) with dilute sulfuric acid resulted in removal of a significant amount of base metals from a WPCB ash sample obtained by incineration at 800°C. The parameters investigated in the precious metal leaching from WPCB residue after HPOL included the sulfuric acid concentration, thiourea concentration, oxidant concentration, leaching temperature, and leaching time. Recovery of gold, silver, and palladium of 100%, 81%, and 13% from the WPCB residue sample was achieved by thiourea leaching under optimized conditions. The results show that the efficiency of precious metal dissolution from the WPCB sample using thiourea solution depended strongly on the concentration of both thiourea and oxidant.     

Ionic mechanisms of action of neurotensin in acutely dissociated neurons from the diagonal band of Broca of the rat

Whole cell recordings were performed on acutely dissociated neurons from the horizontal limb of the diagonal band of Broca (hDBB) from rats to elucidate the ionic mechanisms of action of neurotensin. Neurotensin caused a decrease in whole cell voltage-activated outward currents and failed to elicit a response when Ca2+ influx was blocked by changing the external solution to the one containing 0 mM Ca2+ and 50 microM Cd2+, suggesting the involvement of Ca2+-dependent conductances. Charybdotoxin, a specific blocker of voltage-sensitive calcium-activated K+ channels (IC), caused a decrease in outward currents comparable with that caused by blocking calcium influx and occluded the neurotensin-induced decrease in outward currents. Similarly, 50 microM tetraethylammonium ions also blocked the neurotensin response. Also neurotensin reduced whole cell barium currents (IBa) and calcium currents (ICa). Amiloride and omega-conotoxin GVIA, but not nimodipine, were able to eliminate the neurotensin-induced decrease in IBa. Thus T- and N- but not L-type calcium channels are subject to modulation by neurotensin, and this may account for its effects on IC. The predicted changes in action potential as a result of the blockade of currents through calcium channels culminating into changes in IC were confirmed in the bridge current-clamp recordings. Specifically, neurotensin application led to depolarization of the resting membrane potential, broadening of spike and a decrease in afterhyperpolarization and accommodation. These alterations in action potential characteristics that resulted in increased firing rate and excitability of the hDBB neurons also were produced by application of charybdotoxin. Neurotensin effects on these properties were occluded by 2 - [(1 - 7 - chloro - 4 - quinolinyl) - 5 - (2, 6 - di - methoxyphenyl) pyrazol-3-yl) carbonylamino] tricyclo (3.3.1.1.)decan-2-carboxylic acid, a nonpeptide high-affinity neurotensin receptor antagonist. Neurotensin blockade of IC, possibly through ICa, is a potential physiological mechanism whereby this peptide may evoke alterations in the cortical arousal, sleep-wake cycle, and theta rhythm.     

Chronic inhibition of NOS does not prevent plasticity of rat somatosensory (S1) cortex following deafferentation

Nitric oxide (NO) has been proposed as an intercellular messenger mediating postsynaptic to presynaptic information transfer in the induction of long-term potentiation. A number of studies support the possible involvement of NO in synaptic plasticity. NO may have a role in synaptogenesis and synaptic plasticity in developing rat brain and may play a fundamental part in the process of regeneration, plasticity, and retargeting of axons following injury. We examined the possible role of NO on plasticity in the rat first somatosensory cortex with [14C]2-deoxyglucose (2-DG) autoradiography in rats treated daily with l-nitroarginine (l-NA) following neonatal unilateral vibrissae deafferentation. After 6 weeks of l-NA treatment, the local cerebral glucose utilization (LCGU) and the spatial extent of the metabolic activation following stimulation of the spared whisker was measured. NOS catalytic activity exhibited significant inhibition throughout the treatment period. Vibrissae deafferentation produced a small but not statistically significant increase of LCGU in the vibrissa activated C3 barrel, and l-NA treatment did not alter the activation of LCGU in the deafferented cortex following whisker stimulation. Additionally, l-NA treatment did not alter the area of metabolic activation on either the non-deafferented side or the deafferented side. Deafferentation produced a 298% increase in the metabolic representation of the spared C3 barrel following stimulation in the saline treated animals, a 257% increase in the chronically l-NA treated animals, and a 256% increase in the short-term treated animals, all with respect to the response in the non-deafferented cortex. Metabolic plasticity in the barrel cortex was not attenuated by l-NA treatment. These results show that nitric oxide does not play a major role on developmental cortical plasticity induced by vibrissae deafferentation in the rat.     

An in vitro tissue culture bilayer model to examine early events in Mycobacterium tuberculosis infection

A tissue culture bilayer system that mimics some aspects of early alveolar infection by Mycobacterium tuberculosis was developed. This model incorporates human lung epithelial type II pneumocyte (A549) (upper chamber) and endothelial cell (lower chamber) layers separated by a microporous membrane. This construction makes it possible to observe and quantify the passage of bacteria through the two layers, to observe the interaction of the bacteria with the various cell types, and to examine the basic mechanisms of immune cell recruitment to the site of infection. After 10(7) organisms were added to the upper chamber we microscopically observed large numbers of bacteria attached to and within the pneumocytes and we determined by viable-cell counting that a small percentage of the inoculum (0.02 to 0.43%) passed through the bilayer into the lower chamber. When peripheral blood mononuclear cells were added to the lower chamber, microscopic examination indicated a migration of the mononuclear cells through the bilayer to the apical surface, where they were seen associated with the mycobacteria on the pneumocytes. The added complexity of the bilayer system offers an opportunity to define more precisely the roles of the various lung cell types in the pathogenesis of early tuberculosis.     

Structural change in mercerized cotton fibers on cellulase treatment

Cotton fibers treated with liquid ammonia and sodium hydroxide were hydrolyzed with crude cellulase. The structural change in the fibers due to the cellulase treatment was examined in relation to the apparent affinity of Congo Red. The cellulose III crystalline structure collapsed and generated intermediate‐molecular‐ordered regions on cellulase treatment. Adsorption of Congo Red occurred on the crystallite surfaces of cellulose II and cellulose III that was transformed from cellulose II. The fiber, the dominant crystallite phase of which was cellulose III that was transformed from cellulose II, had a considerably increased apparent affinity after cellulase treatment. The intermediate structure on the crystallite surface was associated with the adsorption of Congo Red in the cases of cellulose II and cellulose III. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1675–1680, 2001     

Activation of particulate guanylyl cyclase by Vibrio vulnificus hemolysin

Recently we reported that Vibrio vulnificus hemolysin, an exotoxin produced by V. vulnificus, dilates rat thoracic aorta via elevated cGMP levels without affecting nitric oxide synthase. We investigated the mechanism further by observing the guanylyl cyclase activities in cytosolic, membrane, unfractionated, or reconstituted preparations. Hemolysin did not activate guanylyl cyclase in the membrane or cytosolic fraction, while it activated guanylyl cyclase in unfractionated or reconstituted preparation. The increased activity was not inhibited by the HS-142-1, a microbial polysaccharide which antagonizes atrial natriuretic peptide receptor, or 1H-[1,2,4]oxadiazolo[4,3-a]quinoxalin-1-one (ODQ), a soluble guanylyl cyclase inhibitor. However, it was attenuated by 6-(phenylamino)-5,8-quinolinedione (LY 83.583), which inhibits the catalytic domain of both guanylyl cyclases, and by cholesterol, which blocks hemolysin-incorporation into the membrane. Removing ATP, a cofactor of particulate guanylyl cyclase, attenuated the activation and ATPgammaS, a non-phosphorylating analog, restored it. These results suggest that V. vulnificus hemolysin activates particulate guanylyl cyclase via hemolysin incorporation into the vascular smooth muscle cell membrane in cooperation with certain unidentified cytosolic component(s).