Uplink Scheduling in CDMA Packet-Data Systems

Uplink scheduling in wireless systems is gaining importance due to arising uplink intensive data services (ftp, image uploads etc.), which could be hampered by the currently in-built asymmetry in favor of the downlink. In this work, we propose and study algorithms for efficient uplink packet-data scheduling in a CDMA cell. The algorithms attempt to maximize system throughput under transmit power limitations on the mobiles assuming instantaneous knowledge of user queues and channels. However no channel statistics or traffic characterization is necessary. Apart from increasing throughput, the algorithms also improve fairness of service among users, hence reducing chances of buffer overflows for poorly located users. The major observation arising from our analysis is that it is advantageous on the uplink to schedule “strong” users one-at-a-time, and “weak” users in larger groups. This contrasts with the downlink where one-at-a-time transmission for all users has shown to be the preferred mode in much previous work. Based on the optimal schedules, we propose less complex and more practical approximate methods, both of which offer significant performance improvement compared to one-at-a-time transmission, and the widely acclaimed Proportional Fair (PF) algorithm, in simulations. When queue content cannot be fed back, we propose a simple modification of PF, Uplink PF (UPF), that offers similar improvement. Hereafter, we refer to users with low recieved power at the base even when transmitting at peak transmit power as “weak” users, and the strongly recieved users at the base as “strong” users. Krishnan Kumaran is currently a member of the Complex Systems Modeling section in the Corporate Strategic Research of ExxonMobil Corp., Clinton, NJ. Formerly, he was a Member of Technical Staff in the Mathematics of Networks and Systems Research Department at Bell Labs in Murray Hill, NJ, where his research interests were in modeling, analysis and simulation of design, resource management and scheduling issues in telecommunication networks. Lijun Qian is an assistant professor in the Department of Electrical Engineering at Prairie View A&M University. He received his B.S. from Tsinghua University in Beijing, M.S. from Technion-Israel Institute of Technology, and Ph.D. from WINLAB, Rutgers University, all in electrical engineering. Before joining PVAMU, he was a researcher at Networks and Systems Research Department of Bell Labs in Murray Hill, NJ. His major research interests are in wireless communications and networking technologies, especially in radio resource management, protocol design, TCP/RLP optimization and MPLS traffic engineering.     

Identification of microstructural zones and thermal cycles in a weldment of modified 9Cr-1Mo steel

This paper presents the results of a study on the microstructural and microchemical variations in a multipass Gas Tungsten Arc weld (GTAW) of modified 9Cr-1Mo steel. The changes brought about in the steel due to the heating and cooling cycles during welding and the subsequent effects due to reheating effects during multipass welding are described. Detailed analytical transmission electron microscopy has been carried to study the type and composition of the primary and secondary phases in this steel. The systematic changes in microstructural parameters such as Prior Austenite Grain Size, martensite lath size, number density, size and microchemistry of carbides, have been understood based on the different transformations that the steel undergoes during the heating and cooling process. Based on the observed microstructure, an attempt has been made to identify distinct microstructural zones and possible thermal cycles experienced by different regions of the weldment.     

Useful NMR solvent mixture for polyesters: Trifluoroacetic acid-d/chloroform-d

Summary NMR spectra of high molecular weight polyesters such as polyglycolide (PG) and poly(ethylene terephthalate) (PET) have not been available because of low solubility in suitable NMR solvents. Although PG is not soluble enough at ambient temperatures for NMR spectra in either chloroform-d or trifluoroacetic acid-d alone, it dissolves readily to over 0.9% in a mixture of the two. At this concentration, ¹H and ¹³C spectra can be obtained on samples where end group signals are visible from which molecular weights can readily be determined. The solutions are stable up to at least four days when moisture is excluded. NMR spectra of PET can likewise be obtained at ambient temperatures in the solvent mixture which dissolves up to at least 0.6% of PET.     

Foveation-Based Error Resilience and Unequal Error Protection over Mobile Networks

By exploiting new human-machine interface techniques, such as visual eyetrackers, it should be possible to develop more efficient visual multimedia services associated with low bandwidth, dynamic channel adaptation and robust visual data transmission. In this paper, we introduce foveation-based error resilience and unequal error protection techniques over highly error-prone mobile networks. Each frame is spatially divided into foveated and background layers according to perceptual importance. Perceptual importance is determined either through an eye tracker or by manually selecting a region of interest. We attempt to improve reconstructed visual quality by maintaining the high visual source throughput of the foveated layer using foveation-based error resilience and error correction using a combination of turbo codes and ARQ (automatic reQuest). In order to alleviate the degradation of visual quality, a foveation based bitstream partitioning is developed. In an effort to increase the source throughput of the foveated layer, we develop unequal delay-constrained ARQ (automatic reQuest) and rate compatible punctured turbo codes where the punctual pattern of RCPC (rate compatible punctured convolutional) codes in H.223 Annex C is used. In the simulation, the visual quality is significantly increased in the area of interest using foveation-based error resilience and unequal error protection; (as much as 3 dB FPSNR (foveal peak signal to noise ratio) improvement) at 40% packet error rate. Over real-fading statistics measured in the downtown area of Austin, Texas, the visual quality is increased up to 1.5 dB in PSNR and 1.8 dB in FPSNR at a channel SNR of 5 dB.     

Acoustic emission technique for leak detection in an end shield of a pressurised heavy water reactor

This paper discusses the successful application of the Acoustic Emission Technique (AET) for detection and location of leak paths present on the inaccessible side of an end shield of a Pressurised Heavy Water Reactor (PHWR). The methodology was based on the fact that air and water leak AE signals have different characteristic features. Baseline data was generated from a sound end-shield of a PHWR for characterizing the background noise. A mock up end-shield system with saw cut leak paths was used to verify the validity of the methodology. It was found that air leak signals under pressurisation (as low as 3 psi) could be detected by frequency domain analysis. Signals due to air leaks from various locations of a defective end-shield were acquired and analysed. It was possible to detect and locate leak paths. Presence of detected leak paths were further confirmed by alternate test.     

Literature reviews in student project reports

Writing project reports is an important part of the engineering curriculum at Singapore universities. One important section of the formal report is the literature review. Most universities around the world provide guidelines on writing reviews, emphasizing that plagiarism is unethical. However, these guidelines do not offer explicit training on how to avoid plagiarism. In order to write academically acceptable reviews while avoiding copying from source materials, students face a major challenge and resort to employing various strategies to cope with the task. In this study, we examined the literature review sections of final year project reports to find out how engineering undergraduates in a Singapore university cope with writing reviews and to suggest ways in which they can extend their skills to improve their literature reviews.     

Synthesis and characterisation of N-toluyl methacrylatoethyl carbamates,homopolymers and copolymers with methyl methacrylate

The paper describes the synthesis of N-2/4-toluyl methacrylatoethyl carbamates using 2/4-toluyl isocyanate and 2-hydroxyethyl methacrylate. Homopolymerisation and copolymerisation of these novel monomers with methyl methacrylate was carried out using benzoyl peroxide as an initiator and tetrahydrofuran as solvent. Photopolymerisation of N-4-toluyl methacrylatoethyl carbamate could be carried out without the use of photosensitiser. Structural characterisation of copolymers was done using ¹H-NMR. Thermal stability of copolymers was evaluated in a nitrogen atmosphere by dynamic thermogravimetry.     

AHW-BGOA-DNN: a novel deep learning model for epileptic seizure detection

Neural Computing and Applications - “Brain–Computer Interface” (BCI)—a real-life support system provides a way for epileptic patients to improve their quality of life. In...