Volatilization of fluorine in a CaO–SiO2–CaF2-based system with the substitution of Na2O with K2O

Cuspidine-based systems are used to control the crystallization in mold fluxes, which is enabled by CaF₂ additions. However, excess CaF₂ increases the corrosion of casting machines. Therefore, Na₂O and K₂O are added to the mold flux system to ensure an optimized crystallization and lubrication ability of the flux with the CaF₂ content. This study investigated the effect of substituting Na₂O with K₂O on the volatilization of fluorine in a CaO–SiO₂–CaF₂-based slag system at high temperatures. The substitution of Na₂O with K₂O was performed at 5 mol% intervals. The volatilization was observed by thermogravimetric analysis under several isothermal conditions. The mass loss was measured at a heating rate of 5, 10, and 20 K/min. As the temperature increased, the volatilization of the mixed samples increased. The activation energy was calculated using the Flynn–Wall–Ozawa and Kissinger–Akahira–Sunose methods. A kinetic analysis of the volatilization of fluorine was conducted using the calculated parameters and several known kinetic models. Consequently, the volatilization of the Na-rich sample was controlled by chemical reactions and that of the K-rich sample was identified to be controlled by a phase-boundary-controlled reaction. These results suggest that the addition of mixed alkali oxide promote the volatilization during the early stages of the reaction. From the post-experimental composition analyses, the remaining Na and K in the samples suggested a different mechanism for the Na and K volatilization. The volatilization of Na increased with time, whereas K volatilized easily during the beginning of the reaction.     

A Polyallylamine Anchored Amine‐Rich Laser‐Ablated Graphene Platform for Facile and Highly Selective Electrochemical IgG Biomarker Detection

Current immunosensors have an insufficient number of binding sites for the recognition of biomolecules, which leads to false positive or negative results. In this research, a facile, cost‐effective, disposable, and highly selective electrochemical immunosensing platform is developed based on cationic polyelectrolyte polyallylamine (PAAMI) anchored laser‐ablated graphene (LAG). Here, for the first time, PAAMI is introduced to stabilize LAG flakes, while retaining the intrinsic thermal and electronic properties of the substrate by noncovalent π–π interaction and electrostatic physical absorption. The sensing platform offers a suitable number of anchoring sites for the immobilized antibodies by providing ? NH₂ functional groups. The proper grafting of PAAMI is confirmed through X‐ray photoelectron spectroscopy and Raman spectroscopy. The immunosensing platform is applied to detect immunoglobulin (IgG) biomarkers as a proof of concept. Under optimized conditions, the sensing platform exhibits a linear range of 0.012–15 and 15–352 ng mL^?1 with a limit of detection of 6 pg mL^?1 for IgG detection with high selectivity. Based on the analysis, the developed immunosensing platform can be used for point‐of‐care detection of IgG in clinical diagnostic centers. Furthermore, the developed strategy is well suited for the detection of other cancer biomarkers after immobilizing the relevant antibodies.     

Automatic Transformation of Membrane‐Type Electronic Devices into Complex 3D Structures via Extrusion Shear Printing and Thermal Relaxation of Acrylonitrile–Butadiene–Styrene Frameworks

This work demonstrates a means of automatic transformation from planar electronic devices to desirable 3D forms. The method uses a spatially designed thermoplastic framework created via extrusion shear printing of acrylonitrile–butadiene–styrene (ABS) on a stress‐free ABS film, which can be laminated to a membrane‐type electronic device layer. Thermal annealing above the glass transition temperature allows stress relaxation in the printed polymer chains, resulting in an overall shape transformation of the framework. In addition, the significant reduction in the Young's modulus and the ability of the polymer chains to reflow in the rubbery state release the stress concentration in the electronic device layer, which can be positioned outside the neutral mechanical plane. Electrical analyses and mechanical simulations of a membrane‐type Au electrode and indium gallium zinc oxide transistor arrays before and after transformation confirm the versatility of this method for developing 3D electronic devices based on planar forms.     

Stimulation of densification during the reduction of U3O8 to UO2 by atmosphere control

A reduction process in the head-end for pyroprocessing has been adopted to avoid oxidation attack on the molybdenum crucible during sintering. The reduction process is employed to reduce U₃O₈ pellets to UO₂ prior to sintering. This allows elimination of the oxygen source, which causes oxidation attack during sintering, thereby permitting the use of a metallic crucible. However, little densification occurs due to the low reduction temperature limited by the INCONEL crucible. Consequently, the amount of material scraps from the pellets increases, thus creating an additional processing burden due to its high radioactivity. To reduce the amount of scraps, densification should be enhanced. This study suggests a simple atmospheric control strategy and clarifies its effects. With the atmospheric control, a higher bulk density and better attrition resistance were obtained in comparison to without this strategy. This can be explained in terms of O/U ratio dependent diffusion kinetics during the reduction of U₃O₈ to UO₂.     

Experiment and analysis of the effect of BCB sealing ring flatness on BCB cap transfer packaging

Microsystem Technologies - This paper presents the effect of BCB sealing ring flatness on BCB bonding for wafer-scale BCB cap transfer packaging. BCB sealing ring has shown partial bonding or full...     

Cooling effect of oil cooling method on electric vehicle motors with hairpin winding

Journal of Mechanical Science and Technology - The cooling effect of oil cooling method on electric vehicle motors with hairpin winding is analyzed. A 160 kW motor being developed by a commercial...     

Assessing robustness of factor ranking for supersaturated designs

Supersaturated designs can potentially be a beneficial tool for efficiently exploring a large number of factors with a moderately sized design. However, because more factors are being considered than there are runs, the stability of the identified factors depends heavily on effect sparsity and the lack of highly influential observations. A helpful tool for the analysis of supersaturated designs is least absolute shrinkage and selection operation (LASSO), which is useful when the effects of many explanatory variables are sparse in a high‐dimensional dataset. To understand the impact of individual observations on the selected factors, the LASSO influence plot was created. This paper describes an application of this plot and its variants that can be used to identify influential points, increase understanding of the impact of individual observations on model parameters, and the robustness of results in analyses with supersaturated designs. These graphical methods can serve as a complement to other regression diagnostics techniques in the LASSO regression setting.