The effect of touch-key size on the usability of In-Vehicle Information Systems and driving safety during simulated driving

Investigating the effect of touch-key size on usability of In-Vehicle Information Systems (IVISs) is one of the most important research issues since it is closely related to safety issues besides its usability. This study investigated the effects of the touch-key size of IVISs with respect to safety issues (the standard deviation of lane position, the speed variation, the total glance time, the mean glance time, the mean time between glances, and the mean number of glances) and the usability of IVISs (the task completion time, error rate, subjective preference, and NASA-TLX) through a driving simulation. A total of 30 drivers participated in the task of entering 5-digit numbers with various touch-key sizes while performing simulated driving. The size of the touch-key was 7.5 mm, 12.5 mm, 17.5 mm, 22.5 mm and 27.5 mm, and the speed of driving was set to 0 km/h (stationary state), 50 km/h and 100 km/h. As a result, both the driving safety and the usability of the IVISs increased as the touch-key size increased up to a certain size (17.5 mm in this study), at which they reached asymptotes. We performed Fitts' law analysis of our data, and this revealed that the data from the dual task experiment did not follow Fitts' law.     

Hydrodynamic trap-and-release of single particles using dual-function elastomeric valves: design, fabrication, and characterization

This paper introduces a simple method for trapping and releasing single particles, such as microbeads and living cells, using dual-function elastomeric valves. Our key technique is the utilization of the elastomeric valve as a dual-function removable trap instead of a fixed trap and a separate component for releasing trapped particles, thereby enabling a simple yet effective trap-and-release of particles. We designed, fabricated, and characterized a microfluidic-based device for trapping and releasing single beads by controlling elastomeric valves driven by pneumatic pressure and a fluid flow action. The fluid flow is controlled to ensure that beads flowing in a main stream enter into a branch channel. A bead is trapped by deflected elastomeric valves positioned at the entrance of a branch channel. The trapped bead is easily released by removing the applied pressure. The trapping and releasing of single beads of 21?μm in diameter were successfully performed under an optimized pressure and flow rate ratio. Moreover, we confirmed that continuous trapping and releasing of single beads by repeatedly switching elastomeric valves enables the collection of a controllable number of beads. Our simple method can be integrated into microfluidic systems that require single or multiple particle arrays for quantitative and high-throughput assays in applications within the fields of biology and chemistry.     

Topological Patterns for Scalable Representation and Analysis of Dataflow Graphs

Tools for designing signal processing systems with their semantic foundation in dataflow modeling often use high-level graphical user interfaces (GUIs) or text based languages that allow specifying applications as directed graphs. Such graphical representations serve as an initial reference point for further analysis and optimizations that lead to platform-specific implementations. For large-scale applications, the underlying graphs often consist of smaller substructures that repeat multiple times. To enable more concise representation and direct analysis of such substructures in the context of high level DSP specification languages and design tools, we develop the modeling concept of topological patterns, and propose ways for supporting this concept in a high-level language. We augment the dataflow interchange format (DIF) language—a language for specifying DSP-oriented dataflow graphs—with constructs for supporting topological patterns, and we show how topological patterns can be effective in various aspects of embedded signal processing design flows using specific application examples.     

Corrosion and inhibition process of carbon steel in LiBr-H2O solution

Journal of Mechanical Science and Technology - Lithium bromide (LiBr)-H2O triple-effect absorption chillers are supposed to have a much higher carbon steel corrosion rate under high temperature...     

Influence of annealing atmosphere on the structure, resistivity and transmittance of InZnO thin films

Dependence of the electrical and optical properties of In₂O₃–10 wt% ZnO (IZO) thin films deposited on glass substrates by RF magnetron sputtering on the annealing atmosphere was investigated. The electrical resistivities of indium zinc oxide (IZO) thin films deposited on glass substrate can be effectively decreased by annealing in an N₂ + 10% H₂ atmosphere. Higher temperature (200 °C) annealing is more effective in decreasing the electrical resistivity than lower temperature (100 °C) annealing. The lowest resistivity of 6.2 × 10⁻⁴ Ω cm was obtained by annealing at 200 °C in an N₂ + 10% H₂ atmosphere. In contrast, the resistivity was increased by annealing in an oxygen atmosphere. The transmittance of IZO films is improved by annealing regardless of the annealing temperature.     

Single‐shot High Dynamic Range Imaging Using Coded Electronic Shutter

Typical high dynamic range (HDR) imaging approaches based on multiple images have difficulties in handling moving objects and camera shakes, suffering from the ghosting effect and the loss of sharpness in the output HDR image. While there exist a variety of solutions for resolving such limitations, most of the existing algorithms are susceptible to complex motions, saturation, and occlusions. In this paper, we propose an HDR imaging approach using the coded electronic shutter which can capture a scene with row‐wise varying exposures in a single image. Our approach enables a direct extension of the dynamic range of the captured image without using multiple images, by photometrically calibrating rows with different exposures. Due to the concurrent capture of multiple exposures, misalignments of moving objects are naturally avoided with significant reduction in the ghosting effect. To handle the issues with under‐/over‐exposure, noise, and blurs, we present a coherent HDR imaging process where the problems are resolved one by one at each step. Experimental results with real photographs, captured using a coded electronic shutter, demonstrate that our method produces a high quality HDR images without the ghosting and blur artifacts.     

Classification by ensembles from random partitions of high-dimensional data

A robust classification procedure is developed based on ensembles of classifiers, with each classifier constructed from a different set of predictors determined by a random partition of the entire set of predictors. The proposed methods combine the results of multiple classifiers to achieve a substantially improved prediction compared to the optimal single classifier. This approach is designed specifically for high-dimensional data sets for which a classifier is sought. By combining classifiers built from each subspace of the predictors, the proposed methods achieve a computational advantage in tackling the growing problem of dimensionality. For each subspace of the predictors, we build a classification tree or logistic regression tree. Our study shows, using four real data sets from different areas, that our methods perform consistently well compared to widely used classification methods. For unbalanced data, our approach maintains the balance between sensitivity and specificity more adequately than many other classification methods considered in this study.     

FORMATION OF MULLITE FROM GROUND PRODUCT OF A KAOLINITE-ALUMINUM TRIHYDROXIDE MIXTURE BY SOLID PHASE REACTION

The present paper describes the effect of grinding a kaolinite/aiuminum-trihydroxide mixture using a planetary ball mill on the structure of the ground product and the mean thermal expansion coefficients of samples sintered from the unground and ground mixtures. The size reduction of the mixture predominates in the early stage of grinding and the obtained fine particles aggregate subsequently with an increase in grinding time. The crystal structure of the mixture is collapsed easily into a disordered one, of which amount increases with an increase in grinding time. Only mullite phase was detected in the sintered body of the ground products at relatively lower temperature 1523K except for anatase as an inherent impurity, whereas corundum, cristobalite and Al-Si spinel phases besides mullite were formed in the sintered body of the unground mixture. The thermal expansion coefficients of sintered bodies of the 120 minutes-ground mixture are considerably lower than those of the unground mixture by about 10%. Consequently, the planetary milling enables us to improve the uniform mixing state at the atomic scale resulting in direct formation of mullite with high purity at relatively low temperature with a lower thermal expansion coefficient of the sintered body.     

Improving TCP performance for vertical handover in heterogeneous wireless networks

The incorporation of wireless local area networks (WLANs) into existing cellular networks as supplementary access technologies has become an issue of great interest. However, vertical handover (VHO), which allows users to roam between a WLAN and a cellular network, causes an abrupt change in certain link characteristics such as the round trip time and data rate. Owing to such changes, reordering problem and premature timeout occur and trigger unnecessarily fast retransmission during VHO, causing throughput degradation. Thus, we propose a new transmission control protocol (TCP) mechanism, which resolves the reordering problem by suppressing unnecessary retransmission caused by spurious duplicate acknowledgments (dupacks) incurred because of the reordering problem, and prevents premature timeout by employing an adaptive retransmission timer. We analytically investigate the throughput of our proposed TCP scheme. The numerical and simulation results show that our proposed TCP performs better in terms of throughput than other schemes appearing in the literature. Copyright © 2009 John Wiley & Sons, Ltd.