The optimum operational condition of membrane bioreactor (MBR): cost estimation of aeration and sludge treatment

A methodology to obtain the most economical operational condition of membrane bioreactor (MBR) is developed. In order to achieve the optimum design parameters of MBR with which operational costs are minimized, aeration and sludge treatment costs were estimated for various operational conditions. Generally sludge treatment cost and aeration cost were inversely proportional to each other, which means sludge treatment cost is minimized when aeration cost is maximized and vice versa. Therefore, there might exist an optimum point between the two extreme cases. However, sludge treatment cost turned out to overwhelm the aeration cost over the reasonable operational conditions. Therefore, sludge minimization was considered to be a key for the economical operation of MBR. In the case of typical municipal wastewater of which COD was 400mgL(-1), steady-state MLSS was expected to increase from 11,000 to 15,000mg/L without sludge removal when HRT was decreasing from 16 to 12h. For the range of operational conditions considered in this study, economically optimum HRT and target MLSS were turned out to be 16h and 11,000mg/L, respectively. Under this condition, aeration for the biodegradation of organic matters would be 13.3m(3) air/min when influent was 1000m(3)/day.     

Morphogenic inspired self-organization control of unmanned aerial swarm robots

A central issue in distributed formation of swarm is enabling agents with only a local view of their environment to take actions that advance global system objectives (emergence of collective behavior). This paper describes a bio-inspired control algorithm using pheromone for coordinating a swarm of identical flying agents to spatially self-organize into arbitrary shapes using local communication maintaining a certain level of density. Development of morphological features such as the fine formation of particles, hollow particles, cracks in particles, and the evolution of the structure are used as illustrative examples. Distributed formation of swarming with no coordinated agreement or positioning information is an interesting research area because the global behaviors must emerge from many diverse local interactions. Different from most existing distributed control, the proposed approach considers the topological structure of the organization, supports dynamic reconfiguration and self-organization. This paper presents the experimental results on simulating in the forming of arbitrary shape, and also describes a analytic aspect of our model comparing with behavioral performances.

     

System analysis study for Korean fusion DEMO reactor

A conceptual design study for a steady-state Korean fusion DEMO reactor (K-DEMO) has been initiated. Two peculiar features need to be noted. First, the major radius is designed to be just below 6.5 m, considering practical engineering feasibilities. But still, high magnetic field at the plasma center around 8 T is expected to be achieved by using current state-of-the-art high performance Nb₃Sn strand technology. Second, a two-stage development plan is being considered. In the first stage, K-DEMO will demonstrate a net electricity generation but will also act as a component test facility. Then, after a major upgrade, K-DEMO is expected to show a net electric generation on the order of 300 MWe and the competitiveness in cost of electricity (COE). Feasibility of such a practical, near-future demonstration reactor is studied in this paper, based on a zero dimensional system analysis code study. It was shown that a net electric generation on the order of 300 MWe can be achieved below the optimistic β_N limit of 5. The elongation of K-DEMO is around 1.8 with single null configuration. Detailed optimization process and the resultant various plasma parameters are described.     

A preliminary conceptual design study for Korean fusion DEMO reactor

As the ITER is being constructed, there is a growing anticipation for an earlier realization of fusion energy, so called fast-track approach. Korean strategy for fusion energy can be regarded as a fast-track approach and one special concept discussed in this paper is a two-stage development plan. At first, a steady-state Korean DEMO Reactor (K-DEMO) is designed not only to demonstrate a net electricity generation and a self-sustained tritium cycle, but also to be used as a component test facility. Then, at its second stage, a major upgrade is carried out by replacing in-vessel components in order to show a net electric generation on the order of 300 MWe and the competitiveness in cost of electricity (COE). The major radius is designed to be just below 6.5 m, considering practical engineering feasibilities. By using high performance Nb₃Sn-based superconducting cable currently available, high magnetic field at the plasma center above 8 T can be achieved. A design concept for TF magnets and radial builds for the K-DEMO considering a vertical maintenance scheme, are presented together with preliminary design parameters.     

Leaf-to-Whole Plant Spread Bioassay for Pepper and Ralstonia solanacearum Interaction Determines Inheritance of Resistance to Bacterial Wilt for Further Breeding

Bacterial wilt (BW) disease from Ralstonia solanacearum is a serious disease and causes severe yield losses in chili peppers worldwide. Resistant cultivar breeding is the most effective in controlling BW. Thus, a simple and reliable evaluation method is required to assess disease severity and to investigate the inheritance of resistance for further breeding programs. Here, we developed a reliable leaf-to-whole plant spread bioassay for evaluating BW disease and then, using this, determined the inheritance of resistance to R. solanacearum in peppers. Capsicum annuum ‘MC4′ displayed a completely resistant response with fewer disease symptoms, a low level of bacterial cell growth, and significant up-regulations of defense genes in infected leaves compared to those in susceptible ‘Subicho’. We also observed the spreading of wilt symptoms from the leaves to the whole susceptible plant, which denotes the normal BW wilt symptoms, similar to the drenching method. Through this, we optimized the evaluation method of the resistance to BW. Additionally, we performed genetic analysis for resistance inheritance. The parents, F₁ and 90 F₂ progenies, were evaluated, and the two major complementary genes involved in the BW resistance trait were confirmed. These could provide an accurate evaluation to improve resistant pepper breeding efficiency against BW.     

An exploratory study on the gaps and pathways to the Korean fusion DEMO

With the vision of being an early demonstrator of fusion energy, the strategic plans for the Fusion DEMO program of Korea (K-DEMO program) has been developed. A staged development of the K-DEMO plant was considered in the strategic plans as to verify technical feasibility in the first stage and economic feasibility in the second stage. The top-tier design requirements and assumptions of the first stage K-DEMO plant are defined and postulated. With these requirements and assumptions, the desired and current status of nuclear fusion technologies are compared to identify the gaps to be filled to design, fabricate, construct, and operate it. The pathways from KSTAR, ITER to K-DEMO plant have also been studied to identify R&D activities for K-DEMO program that are to go in parallel with KSTAR and ITER are extracted from the pathways. Cross-cutting with the fusion R&D activities of the other countries and utilizing the commonalities with the existing systems are discussed with the provision of open-innovation strategy that is one of the key strategies of K-DEMO program. The priority of the R&D activities of K-DEMO program is qualitatively determined in consideration of the gaps, cross-cutting, and risks associated with the R&D investments.     

Simulation study of biobutanol production in a polymer-loaded two-phase partitioning bioreactor (PL-TPPB): Simulation and strategy for biobutanol production

A simulation study was performed for a two-phase partitioning bioreactor (TPPB) with polymer beads, Dowex Optipore L-493, as a second phase. When the initial glucose concentration is less than 30 g/L, a single-phase bioreactor is preferred, because it consumed all the glucose with 40% of biobutanol yield. Any glucose over the concentration remained in the single-phase bioreactor because cells were completely inhibited by products, mainly biobutanol, and thus glucose availability became less than 100%. The TPPB with 10% polymer beads completely consumed up to 120 g/L glucose and more polymer beads were required for the higher glucose concentration. Instead of increasing the proportion of polymer beads, 2 vvm of nitrogen gas was introduced continuously into the TPPB for the stripping of products, reducing product inhibitions. By applying gas stripping to the TPPB containing 10% polymer beads, 150 g/L of glucose was completely consumed and 99.7% acetone, 46.8% butanol and 82.5% ethanol was stripped out of the TPPB. Finally, on the basis of these estimations, a novel strategy based on the initial glucose concentration was suggested for high biobutanol production.     

Characteristics of hydrogenated silicon thin film deposited by RF-PECVD using He-SiH4 mixture

Nanocrystalline silicon thin films (nc-Si:H) were deposited using He as the dilution gas instead of H₂ and the effect of the operating pressure and rf power on their characteristics was investigated. Especially, operating pressures higher than 4 Torr and a low SiH₄ containing gas mixture, that is, SiH₄(3 sccm)/He(500 sccm) were used to induce high pressure depletion (HPD) conditions. Increasing the operating pressure decreased the deposition rate, however at pressures higher than 6 Torr, crystallized silicon thin films could be obtained at an rf power of 100 W. The deposition of highly crystallized nc-Si:H thin film was related to the HPD conditions, where the damage is decreased through the decrease in the bombardment energy at the high pressure and the crystallization of the deposited silicon thin film is increased through the increased hydrogen content in the plasma caused by the depletion of SiH₄. When the rf power was set at a fixed operating pressure of 6 Torr, HPD conditions were obtained in the rf power range from 80 to 100 W, which was high enough to dissociate SiH₄ fully, but meantime low enough not to damage the surface by ion bombardment. At 6 Torr of operating pressure and 100 W of rf power, the nc-Si:H having the crystallization volume fraction of 67% could be obtained with the deposition rate of 0.28 nm/s.