A robust watermarking approach for security issue of binary documents using fully convolutional networks

International Journal on Document Analysis and Recognition (IJDAR) - Motivated by increasing possibility of the tampering of genuine documents during a transmission over digital channels, we focus...     

Design and optimization of radioisotope sources for betavoltaic batteries

A Monte Carlo source model using PENELOPE was developed to investigate different tritiated metals in order to design a better radioisotope source for betavoltaic batteries. The source model takes into account the self‐absorption of beta particles in the source which is a major factor for an efficient source design. The average beta energy, beta flux, source power output, and source efficiency were estimated for various source thicknesses. The simulated results for titanium tritide with 0° and 90° angular distributions of beta particles were validated with experimental results. The importance of the backscattering effect due to isotropic particle emission was analyzed. The results showed that the normalized average beta energy increases with the source thickness, and it reaches peak energy depending on the density and the specific activity of the source. The beta flux and power output also increase with increasing source thickness. However, the incremental increase in beta flux and power output becomes minimal for higher thicknesses, as the source efficiency decreases significantly at higher thicknesses due to the self‐absorption effect. Thus, a saturation threshold is reached. A low‐density source material such as beryllium tritide provided a higher power output with higher efficiency. A maximum power output of approximately 4 mW/cm³ was obtained for beryllium tritide with SiC. A form factor approach was used to estimate the optimum source thickness. The optimum source thickness was found near the thickness where the peak beta particle average energy occurs.     

Identification,Synthesis, and Behavioral Activity of 5,11-Dimethylpentacosane,A Novel Sex Pheromone Component of the Greater Wax Moth,Galleria Mellonella (L.)

The greater wax moth, Galleria mellonella (L.), is a serious and widespread pest of the honeybee, Apis mellifera L. In contrast to most moths, for which long-range mate finding is mediated by female-produced sex pheromones, G. mellonella males attract conspecific females over long distances by emitting large amounts of a characteristic scent in combination with bursts of ultrasonic calls. The male scent for this species was previously identified as a blend of nonanal and undecanal. When these compounds were bioassayed, characteristic short-range sexual behavior, including wing fanning, was triggered in conspecific females, but the aldehyde blend failed to elicit attraction over longer distances. We identified, via analysis and synthesis, a third male-specific compound, 5,11-dimethylpentacosane. We show that it acts as a behavioral synergist to the aldehydes. In wind tunnel experiments, very few female moths responded to the aldehyde blend or to 5,11-dimethylpentacosane tested separately, but consistently showed orientation and source contact when a combination of all three compounds was applied. The level of attraction to the three-component mixture was still lower than that to male extract, indicating that the composition of compounds in the synthetic blend is suboptimal, or that additional pheromone components of G. mellonella are yet to be identified. The identification of 5,11-dimethylpentacosane is an important step for the development of an efficient long-range attractant that will be integrated with other environmentally safe strategies to reduce damage to beehives caused by wax moths.     

Solid respirometry to characterize nitrification kinetics: a better insight for modelling nitrogen conversion in vertical flow constructed wetlands

We developed an original method to measure nitrification rates at different depths of a vertical flow constructed wetland (VFCW) with variable contents of organic matter (sludge, colonized gravel). The method was adapted for organic matter sampled in constructed wetland (sludge, colonized gravel) operated under partially saturated conditions and is based on respirometric principles. Measurements were performed on a reactor, containing a mixture of organic matter (sludge, colonized gravel) mixed with a bulking agent (wood), on which an ammonium-containing liquid was applied. The oxygen demand was determined from analysing oxygen concentration of the gas passing through the reactor with an on-line analyzer equipped with a paramagnetic detector. Within this paper we present the overall methodology, the factors influencing the measurement (sample volume, nature and concentration of the applied liquid, number of successive applications), and the robustness of the method. The combination of this new method with a mass balance approach also allowed determining the concentration and maximum growth rate of the autotrophic biomass in different layers of a VFCW. These latter parameters are essential inputs for the VFCW plant modelling.     

The effects of variability in the inherent optical properties on estimations of chlorophyll a by remote sensing in Swedish freshwaters

During late summer of 1997 measurements were made of the inherent optical properties in Lake M?laren, Sweden. These included measurements of the total particulate absorption, phytoplankton absorption, yellow substance absorption and total backscattering. Measurements were also made of concentrations known to affect the inherent optical properties; chlorophyll a and suspended particulate organic and inorganic matter. At the same time measurements of underwater radiance reflectance were made. The above measurements were used to better define the relationships between the inherent optical properties and the concentrations affecting them. Correlation analyses were also made in order to study covariation of the concentrations of suspended and dissolved substances in the data set. These relationships were then used to better parameterize a semi-analytical model predicting remote sensing reflectance. Multivariate sensitivity analyses showed that large variations on the Rr(700-710)/Rr(678-685) ratio vs. chlorophyll concentrations could be expected in a heterogeneous environment such as Lake M?laren. This could lead to large errors in subsequent estimates of chlorophyll concentrations.     

Productivity and mobility in academic research: evidence from mathematicians

Using an exhaustive database on academic publications in mathematics all over the world, we study the patterns of productivity by mathematicians over the period 1984–2006. We uncover some surprising facts, such as the weakness of age related decline in productivity and the relative symmetry of international movements, rejecting the presumption of a massive “brain drain” towards the US. We also analyze the determinants of success by top US departments. In conformity with recent studies in other fields, we find that selection effects are much stronger than local interaction effects: the best departments are most successful in hiring the most promising mathematicians, but not necessarily at stimulating positive externalities among them. Finally we analyze the impact of career choices by mathematicians: mobility almost always pays, but early specialization does not.     

Numerical assessment of springback for the deep drawing process by level set interpolation using shape manifolds

In this paper, we introduce an original shape representation approach for post-springback characterization based on the automatic generation of parameterized level set functions. The central idea is the concept of the shape manifold representing the design domain in the reduced-order shape-space. Performing Proper Orthogonal Decomposition on the shapes followed by using the Diffuse Approximation allows us to efficiently reduce the problem dimensionality and to interpolate uniquely between admissible input shapes, while also determining the smallest number of parameters needed to characterize the final formed shape. We apply this methodology to the problem of springback assessment for the deep drawing operation of metal sheets.     

PLLA/Flax Mat/Balsa Bio-Sandwich—Environmental Impact and Simplified Life Cycle Analysis

In the present paper the environmental impact of biocomposites and bio-sandwich materials production are evaluated, using simplified Life Cycle Analysis (LCA) following the procedure recommended in the ISO 14044 standard. The materials are dimensioned and evaluated by comparing with reference materials, glass mat reinforced unsatured polyester and glass mat/unsatured polyester/balsa sandwich. The results indicate that bio-sandwich materials are very attractive in terms environmental impact. However further improvements in biocomposite and bio-sandwich mechanical strength are necessary if they are to be used in transport application compared to glass/polyester and glass/polyester/balsa sandwich.