Synthesis,characterization and adsorption studies of h-BN crystal for efficient removal of Cd2+ from aqueous solution

In the present study, hexagonal boron nitride (h-BN) was synthesized from boric acid and melamine by thermal annealing method in a nitrogen atmosphere. The pure h-BN was used as an efficient sorbent for the uptake of Cd²⁺ ions from the solution phase. The kinetics and sorption studies of metal ions onto the h-BN were carried out in batch adsorption experiments at different temperature, time, pH, sorbent dosage, and concentration of metal ions. The optimum pH for the removal of the Cd²⁺ ions was found to be pH 7. The effect of temperature showed that the process of Cd²⁺ sorption remained endothermic in the range of 298 K–328 K. The Lagergren's first and Ho's second kinetic models were tested to interpret the adsorption kinetic data, however the present data was explained well by Ho's model for kinetics. The thermodynamic perameters ΔG, ΔS and ΔH were determined using the available adsorption data at different temperatures. The physicochemical properties of the synthesized product were also characterized before and after adsorption by different analytical techniques like FT-IR, TGA, XRD and Point of Zero Charge (PZC). The morphology of the surface was analyzed with the help of Scanning Electron Microscopy. The h-BN proved to be an efficient adsorbent for the uptake of the Cd²⁺ ions from aqueous media.     

Low thermal conductivity in porous SiC–SiO2–Al2O3–TiO2 ceramics induced by multiphase thermal resistance

The introduction of multiple heterogeneous interfaces in a ceramic is an efficient way to increase its thermal resistance. Novel porous SiC–SiO₂–Al₂O₃–TiO₂ (SSAT) ceramics were fabricated to achieve multiple heterogeneous interfaces by sintering equal volumes of SiC, SiO₂, Al₂O₃, and TiO₂ compacted powders with polysiloxane as a bonding phase and carbon as a template at 600 °C in air. The porosity could be controlled between 66% and 74% by adjusting the amounts of polysiloxane and the carbon template. The lowest thermal conductivity (0.059 W/(m·K) at 74% porosity) obtained in this study is an order of magnitude lower than those (0.2–1.3 W/(m·K)) of porous monolithic SiC, SiO₂, Al₂O₃, and TiO₂ ceramics at an equivalent porosity. The typical specific compressive strength value of the porous SSAT ceramics at 74% porosity was 3.2 MPa cm³/g.     

A Reversible Data Hiding Scheme for Interpolated Images Based on Pixel Intensity Range

Multimedia Tools and Applications - In this paper, we propose a novel interpolation and a new reversible data hiding scheme for upscaling the original image and hiding secret data into the...     

Pedestrian detection using multiple feature channels and contour cues with census transform histogram and random forest classifier

Pattern Analysis and Applications - This paper presents a reliable and real-time method to detect pedestrians in image scenes that can vary greatly in appearance. To achieve greater reliability in...     

Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

Investigation of dielectric properties of free standing electrospun nonwoven mat

Flexible materials with balanced dielectric as well as conductive characteristics have elucidated considerable demand in field of research where conventional dielectric or insulators can be replaced by recent advances in various electronics appliances. Our work describes the detailed analyses of dielectric properties like dielectric constant, losses, and electric modulus by means of broadband dielectric spectroscopy over frequency ranging from 0.1 Hz to 10 MHz and temperature ranging from 0 to 60 °C for poly(vinyl alcohol)‐polyaniline (PVA‐PANI) free standing electrospinning nonwoven mat. It has been contemplated that the dielectric constant was enhanced by increasing PANI concentration for complete range of frequency at room temperature. The enhanced dielectric constant value (5.14 at 0.1 Hz, 2.66 at 1 KHz, 2.58 at 10 KHz, and 2.19 at 10 MHz) was anticipated for 7 wt % loading of PANI which was attributed to the presence of dipoles and interfacial polarization enclosed by the polymers. The increased dielectric constant with PANI dosing as well as with temperature attributed to favorable interfacial polarization. Shifting of peak is noticed in the spectra of imaginary electric modulus with increase in temperature which indicates increased chain dynamics of polymers in the mat. Three‐dimensional analysis of the field emission scanning electron microscopy images was carried out by SPIP analytical software. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46121.     

Experimental investigation of Co and Fe-Doped CuO nanostructured electrode material for remarkable electrochemical performance

The current research work presents a facile and cost–effective co-precipitation method to prepare doped (Co & Fe) CuO and undoped CuO nanostructures without usage of any type of surfactant or capping agents. The structural analysis reveals monoclinic crystal structure of synthesized pure CuO and doped-CuO nanostructures. The effect of different morphologies on the performance of supercapacitors has been found in CV (cyclic voltammetry) and GCD (galvanic charge discharge) investigations. The specific capacitances have been obtained 156 (±5) Fg^?1, 168(±5) Fg^?1 and 186 (±5) Fg^?1 for CuO, Co-doped CuO and Fe-doped CuO electrodes, respectively at scan rate of 5 mVs^?1, while it is found to be 114 (±5) Fg^?1, 136 (±5) Fg^?1 and 170 (±5) Fg^?1 for CuO, Co–CuO and Fe–CuO, respectively at 0.5 Ag^-1 as calculated from the GCD. The super capacitive performance of the Fe–CuO nanorods is mainly attributed to the synergism that evolves between CuO and Fe metal ion. The Fe-doped CuO with its nanorods like morphology provides superior specific capacitance value and excellent cyclic stability among all studied nanostructured electrodes. Consequently, it motivates to the use of Fe-doped CuO nanostructures as electrode material in the next generation energy storage devices.     

Life Cycle Assessment of Wire Rope Used in Crane Application in a Steel Plant

Journal of Failure Analysis and Prevention - Wire rope is an important part of any crane. Failure of wire rope may lead to major loss in terms of life and cost. Wire rope failures are attributed by...     

Effect of Graphene Nanoplatelets Addition on the Mechanical,Tribological and Corrosion Properties of Cu–Ni/Gr Nanocomposite Coatings by Electro-co-deposition Method

Transactions of the Indian Institute of Metals - Nowadays, corrosion of metals is a major problem faced by marine, chemical and automobile industries. Therefore, several researchers are taking...