Applications of Diglycolamide Based Solvent Extraction Processes in Spent Nuclear Fuel Reprocessing,Part 1: TODGA

Over the last decade there has been much interest in the applications of diglycolamide (DGA) ligands for the extraction of the trivalent lanthanide and actinide ions from PUREX high active raffinates or dissolved spent nuclear fuel. Of the DGAs, the N,N,N’,N’-tetraoctyldiglycolamide (TODGA) is the best known and most widely studied. A number of new actinide separation processes have been proposed based on extraction with TODGA. This review covers TODGA-based processes and extraction data, specifically focusing on how phase modifiers have been used to increase metal loading and thus enhance the operating process envelopes. Effects of third phase formation and the organic phase speciation are reviewed in this context. Relevant aspects of the extraction chemistry of important solvents (TODGA-modifier-diluent combinations) are described and their performances demonstrated by a consideration of the published flowsheet tests. It is seen that modifiers are successfully enabling the use of TODGA in actinide separation processes but to date the identification and testing of suitable modifiers has been rather empirical. There is a growing understanding of the fundamental chemistry occurring in the organic phase and how that affects extractant speciation and metal loading capacity but studies are still needed if TODGA-based flowsheets are to become an industrially deployable option for minor actinide (MA) recovery processes.     

An Injectable Hydrogel for Simultaneous Photothermal Therapy and Photodynamic Therapy with Ultrahigh Efficiency Based on Carbon Dots and Modified Cellulose Nanocrystals

The convenience of injectable hydrogels that can provide high loading of diverse phototherapy agents and further long-time retention at the tumor site has attracted tremendous interest in simultaneous photothermal and photodynamic cancer therapies. However, to incorporate the phototherapy agents into hydrogels, complex modifications are generally unavoidable. Moreover, these phototherapy agents usually suffer from low efficiency and work at different irradiation wavelengths outside the near infrared windows. Hence, a method for the fabrication of an injectable hydrogel for simultaneous photothermal therapy and photodynamic therapy, through the Schiff-base reaction between amido modified carbon dots (NCDs) and aldehyde modified cellulose nanocrystals is proposed. The NCDs act as both phototherapy agents and crosslinkers to form hydrogels. Significantly, the NCDs demonstrate an extremely high photothermal conversion efficiency of 77.6% which is among the highest levels for photothermal agents and a high singlet quantum yield of 0.37 under a single 660 nm light-emitting diode irradiation. The hydrogels are examined through in vitro and in vivo animal experiments which show nontoxic and effectively tumor inhibition. Thus, the strategy of direct reaction of phototherapy agents and the matrix not only provides new strategies for injectable hydrogel fabrication but paves a new road for advanced tumor treatment.     

Leaching kinetics of neodymium in sulfuric acid from E-scrap of NdFeB permanent magnet

The leaching kinetics of neodymium in NdFeB permanent magnet powder was analyzed for the purpose of recovery of neodymium in sulfuric acid (H₂SO₄) from E-scrap (electric scrap) of NdFeB permanent magnet powder treated by oxidation roasting to form a reactant. The reaction was conducted with H₂SO₄ concentrations ranging from 2.5 to 3.5M, a pulp density of 110.8 g/L, an agitation speed of 750 rpm, and a temperature range of 30 to 70 °C. After 4 h of leaching, the neodymium content in the E-scrap powders was completely converted into a neodymium sulfate (Nd₂(SO₄)₃) solution phase in H₂SO₄ in the condition of 70 °C and 3.0M H₂SO₄. Based on a shrinking core model with sphere shape, the leaching mechanism of neodymium was determined by the rate-determining step of the ash layer diffusion. Generally, the solubility of pure rare earth elements in H₂SO₄ is decreased with an increase in leaching temperatures. However, the leaching rate of the neodymium in E-scrap powders increased with the leaching temperatures in this study because the ash layer included in the E-scrap powder provided resistance against the leaching. Using the Arrhenius expression, the apparent activation energy values were determined to be 2.26 kJmol^?1 in 2.5M H₂SO₄ and 2.77 kJmol^?1 in 3.0 M H₂SO₄.     

Elastic and inelastic analysis for weld failure prediction of two adjacent steel buildings

Two adjacent buildings near the epicenter of the January 17th Northridge earthquake, one with weld fractures and one without weld fractures, are considered in this research. Both buildings are six stories in height, and their primary lateral force resisting system comprises special moment resisting frames above grade. The buildings considered are referred to herein as the East Building and the West Building. Two basic types of computer studies were performed. One was an elastic 3-D analysis using SAP90, and the other an inelastic 2-D analysis using DRAIN-2DX. Three different models were, created for the elastic analysis. Two for the East Building, designated the ‘benchmark model’, and the ‘probable model’, and one for the West Building, designated the ‘West Building model’. Two different models were created for the inelastic analysis only for the East Building, also called the benchmark model and the probable model. The East Building was unoccupied at the time of the earthquake, hence two models were created for this building. The benchmark model is representative of the design state of the building, while the probable model is representative of the state of the building at the time of the earthquake. The West Building, which was fully occupied at the time of the earthquake, was modeled similarly to the benchmark. Elastic and inelastic studies were performed on these models to determine if a correlation exists between analysis and observed behavior. The findings from the analysis showed no damage to the West Building with possible damage to the East Building. This result is corroborated by the damage survey.     

Landscape scale vegetation-type conversion and fire hazard in the San Francisco bay area open spaces

Successional pressures resulting from fire suppression and reduced grazing have resulted in vegetation-type conversion in the open spaces surrounding the urbanized areas of the San Francisco bay area. Coverage of various vegetation types were sampled on seven sites using a chronosequence of remote images in order to measure change over time. Results suggest a significant conversion of grassland to shrubland dominated by Baccharis pilularison five of the seven sites sampled. An increase in Pseudotsuga menziesii coverage was also measured on the sites where it was present. Increases fuel and fire hazard were determined through field sampling and use of the FARSITE fire area simulator. A significant increase in biomass resulting from succession of grass-dominated to shrub-dominated communities was evident. In addition, results from the FARSITE simulations indicated significantly higher fire-line intensity, and flame length associated with shrublands over all other vegetation types sampled. These results indicate that the replacement of grass dominated with shrub-dominated landscapes has increased the probability of high intensity fires.     

Seismic evaluation and analysis of high-voltage substation disconnect switches

Disconnect switches are one of the components of an electrical substation that are vulnerable to the effects of earthquake shaking. Three vertical-break and two horizontal-break 230 kV switches of porcelain and composite construction were tested on a triaxial earthquake simulator in various configurations. Three-pole switches were mounted on a stiff, low-profile frame and tested according to the industry standard IEEE-693-1997. The vulnerable components of the switches were the aluminum spacers at the base of the switch posts and the welded post-blade connections and the bolted connections at the base of the posts. Single-degree-of-freedom models of the switch insulator posts were developed using experimental data to establish the amplification of seismic demand on the switches when mounted on frames of different heights and stiffness.     

Housing subsidies and income distribution

While housing subsidy programmes directed through government budgets have become more highly focused on those in need, indirect subsidies operating through the taxation and financial systems have become greater during the inflationary period, and have generally been directed towards those with higher incomes. The Housing Subsidies Study identified several hundred housing assistance programmes in Australia, and after aggregating these to manageable proportions, estimated income distributions for the recipients of each programme.     

Sensitiveness of Porous Silicon‐Based Nano‐Energetic Films

Nanoporous silicon (pSi) films on a silicon wafer were loaded with sodium perchlorate and perfluoropolyether (PFPE) oxidizing agents. Sensitiveness to impact, friction and electrostatic discharge (ESD) of the resulting energetic thin films were investigated. It was observed that pSi loaded with perchlorate was sensitive at the lowest limit of detection for the available equipment (<4.9 J impact energy, <5 N friction force, and <45 mJ ESD spark energy). When loaded with PFPE the material was very sensitive to impact (<4.9 J), moderately sensitive to ESD (between 45 and 100 mJ) and insensitive to friction (>360 N). pSi loaded with either perchlorate or PFPE displayed behavior during sensitiveness testing similar to other primary explosive materials.     

The effects of porosity,asphalt content and fiberglass incorporation on the tensile strength and resilient modulus of asphalt concrete blends

Asphalt concrete is the prevailing material used for road surface construction. Its adequate characteristics in providing stability, durability and driving safety are controlled by complex interactions between its components. Thus, it is important to estimate the sensitivity of asphalt concrete mechanical properties as a function of its volumetrics. For this study, different combinations between asphalt content (3.5, 5 and 7.5%) and porosity values (above 4%) were used in order to disassociate these properties. The influence of mixing in fiberglass (0.5%) was also analyzed. It was found that porosity is significantly more relevant than the asphalt content in the prediction of tensile strength and resilient modulus of fiber-free asphalt concretes. In fiber-reinforced mixtures, the mechanical properties are improved by increasing the asphalt content, which suggests a better bonding between fibers and aggregates. For both cases, decreasing porosity is beneficial. By grouping both sets of results, it was possible to create a unique theoretical curve for both the tensile strength (q_t) and the resilient modulus (RM). The RM/q_t ratio was 5800 for the fiber-free group, and 3900 for the fiber-reinforced group - suggesting a better fatigue life indicator for asphalt concretes when fibers are added.