Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

丝锥全生命周期参数对攻丝性能影响的研究

采用正交试验法完成了HSS/Co-M35含钴高速钢丝锥加工Ti-6Al-4V钛合金的攻丝试验。利用极差分析法研究了丝锥全生命周期参数即丝锥前角(刀具设计参数)、刃口钝化半径(刀具制造参数)、主轴转速(刀具使用参数)对攻丝性能的影响。利用综合评分法将扭矩max、轴向切削力max和切削温度max等3项攻丝性能指标转化为单一综合切削性能指标y*i,分析结果表明:攻钛合金时丝锥全生命周期参数取刃口钝化半径0.01 mm,丝锥前角10°,主轴转速150 r/min时最优。通过试验与数值模拟获得的扭矩值及趋势、切屑形态及切削刃对比图,验证了在Advant Edge FEM软件中建立的丝锥攻Ti-6Al-4V钛合金模型的可靠性。     

Processing of nanolitre liquid plugs for microfluidic cell-based assays

Plugs, i.e. droplets formed in a microchannel, may revolutionize microfluidic cell-based assays. This study describes a microdevice that handles nanolitre-scale liquid plugs for the preparation of various culture setups and subsequent cellular assays. An important feature of this mode of liquid operation is that the recirculation flow generated inside the plug promotes the rapid mixing of different solutions after plugs are merged, and it keeps cell suspensions homogeneous. Thus, serial dilutions of reagents and cell suspensions with different cell densities and cell types were rapidly performed using nanolitres of solution. Cells seeded through the plug processing grew well in the microdevice, and subsequent plug processing was used to detect the glucose consumption of cells and cellular responses to anticancer agents. The plug-based microdevice may provide a useful platform for cell-based assay systems in various fields, including fundamental cell biology and drug screening applications.     

Controlled radical polymerization with polyolefin macroinitiator: a convenient and versatile approach to polyolefin-based block and graft copolymers

This paper introduces the new synthetic methodology of polyolefin-based block and graft copolymers with polar segments [e.g., polystyrene and poly(meth)acrylates]. Various brominated polyolefins were prepared by bromination of polyolefins with N-bromosuccinimide. The resulting brominated polyolefins were able to initiate the controlled radical polymerization of polar monomers, such as methyl methacrylate, ethyl acrylate, t-butyl acrylate, styrene and 2-(dimethylamino)ethyl acrylate, using a CuBr/N,N,N′,N″,N″-pentamethyldiethylenetriamine catalyst system, leading to a variety of polyolefin-based copolymers with a different content of the corresponding polar segment. Because of the accessible synthesis of polyolefin macroinitiators, this synthetic methodology is expected to result in the preparation of a wide range of polyolefin-based block and graft copolymers.     

Experimental study on hysteresis phenomena of shock wave structure in an over-expanded axisymmetric jet

In recent studies on two-dimensional supersonic jets, it is reported that the hysteresis phenomenon for the reflection type of shock waves in the jet flow field is occurred under the quasi-steady flow condition and this phenomenon is affected by the transitional pressure ratio between the regular reflection and Mach reflection. However, so far, there are few researches on the hysteresis phenomenon for the transition of shock waves between regular and Mach reflection in over-expanded supersonic jets and the phenomenon has not been investigated satisfactorily. Therefore, the purpose of this study is to clarify the hysteresis phenomena for the reflection type of shock wave in the over-expanded axi-symmetric supersonic jet experimentally, and to discuss the relationship between hysteresis phenomenon and rate of the change of pressure ratio with time. Furthermore, the effect of Mach number at the nozzle exit on hysteresis loop was investigated for two kinds of nozzle.     

职务犯罪案件逮捕决定权配置改革审视

介绍了检察院直接受理侦查案件由上一级检察院审查逮捕的法理依据,分析了职务犯罪案件决定逮捕权上提一级后将面临的问题,提出了克服问题的措施建议.     

Cu材料激光表面强化研究

采用激光技术对Cu基材进行表面强化处理。使用扫描电镜(SEM)、电子能谱计(EDS)和X射线衍射仪(XRD)对强化表面进行显微组织和物相分析,并测试了样品的显微硬度、耐磨性能和导电性能。结果表明,激光强化层无裂纹,组织细小均匀、呈快速凝固特征,强化层具有较高的硬度(平均硬度为625HV0.1)和良好的耐磨性,其磨损失重仅为纯Cu基材的1/5,而激光表面强化使导电性略微降低。激光表面强化层硬度和耐磨性的提高可归因于颗粒强化、细晶强化和固溶强化的共同作用,而导电性的降低程度主要受稀释率的影响。     

Ziegler-Natta/茂金属复合催化剂聚合性能的研究

制备了Ziegler-Natta/茂金属复合(Z-M)催化剂,用SEM技术对其形貌进行了表征,在10L丙烯液相本体聚合模试装置上对Z-M催化剂的氢调敏感性进行了评价。通过一段丙烯本体均聚、二段乙烯-丙烯近恒温恒压气相共聚模拟Spheripol-Ⅱ工艺制备了系列聚丙烯(PP)釜内合金;考察了二段共聚时的聚合反应动力学、乙烯与丙烯配比(n(C3)∶n(C2))对PP釜内合金性能的影响。实验结果表明,在一段均聚时Z-M催化剂具有较好的氢调敏感性,得到的均聚PP粒子具有较好的流动性;在二段共聚时,Z-M催化剂能在较长的共聚时间内保持较平稳、较高的共聚活性,改变n(C3)∶n(C2)时PP釜内合金中乙丙橡胶的质量分数可调(7.19%~10.75%),熔体流动速率(10min)可调(14.0~26.5g);n(C3)∶n(C2)对合金弯曲模量的影响不大;当n(C3)∶n(C2)=1.7时制备的PP釜内合金具有最大的冲击强度(92.9J/m)。